Meat Processing Feasibility Study: USDA B&I, SPUR and SBA Lending Guide

    Last updated 2026-11-08

    Short answer

    A meat processing feasibility study is the independent report that tells a lender and USDA whether a slaughter, processing or poultry plant can win a grant of federal inspection, fill its kill floor and cutting room with enough animals, sell the product and by-products, and still pay its debt. Under USDA's Business and Industry (B&I) program a study by an independent qualified consultant is required for any guaranteed loan over $1,000,000 to a new business, and USDA or the lender may ask for one on smaller loans [1]. The same 7 CFR part 5001 rules now also govern the new Strengthening Processing for US Ranchers (SPUR) guaranteed loan, which USDA opened on 27 October 2026 with a 90% guarantee for meat, poultry and seafood processors in rural or urban areas [2].

    The national numbers set the frame. The U.S. had 3,716 meat and poultry processing establishments with paid employees in 2023, up from 3,501 in 2019 (+6.1%). They average 149.7 employees and pay $50,981 per employee [3]. In the county-level file, 25.2% of establishments sit in non-metro counties, against 13.6% of the population, so non-metro counties hold 1.86 times the share of plants that they hold of population [3][4][5]. Of 214 SBA 7(a) loans made to these plants in FY2010 to FY2016, 3.7% were charged off, on average 72 months after approval [6]. Data current as of November 2026.

    QuestionAnswer
    Is a study required?Yes for B&I and SPUR guaranteed loans over $1,000,000 to a new business; otherwise at the discretion of USDA or the lender [1]
    Which programs fit?B&I, SPUR, SBA 7(a) and 504, conventional bank credit; REAP for energy efficiency at an existing rural plant
    FY2026 B&I guarantee85% under $5 million, 80% from $5 million to $25 million; 3.0% guarantee fee; 0.55% annual retention fee [7]
    FY2027 SPUR guarantee90%; 3% guarantee fee; 0.55% retention fee; lender keeps at least 10% [2]
    New-business equity20% balance-sheet equity or 25% of project cost; 25% for construction with an early guarantee [1]
    Typical study timeline on this site4 to 8 weeks; 3 to 4 weeks on a rush basis [8]

    What a meat processing feasibility study is, and when USDA requires one

    Part 5001 defines a feasibility study as a report with an opinion or finding by an independent qualified consultant on the economic, market, technical, financial and management feasibility of the project, as laid out in appendix A to subpart D [1]. Appendix A is printed as a graphic in the CFR; this page follows the 2020 Federal Register version [9]. For a meat plant the hard part is proving that animals, inspectors, workers, buyers and the wastewater system will line up at the scale the loan assumes.

    Whether it is mandatory depends on the program, loan size and whether the borrower is a new business: one operating less than a full year, or longer without reaching stable operations, including an enterprise moving into a new market or labour area [1]. A decades-old butcher shop adding an inspected kill floor in a new building can count as new.

    Financing routeFeasibility study ruleSource
    B&I loan over $1,000,000 to a new businessRequired, by an independent qualified consultant acceptable to the Agency; Agency sets scope5001.306(a)(3)(i)
    B&I loan of $1,000,000 or lessAgency may require one if the lender's analysis is not sufficient or the project will significantly affect an existing business5001.306(a)(3)(ii)
    B&I loan of $600,000 or lessStreamlined application if the lender's analysis is sufficient5001.306(b)
    REAP guaranteed loan, renewable energy systemWhen the lender or Agency deems it necessary; technical report always required5001.307(d), (e)
    SBA 7(a) or 504SBA may require a feasibility study13 CFR 120.160(b)
    Guarantee issued before construction completionBudget and timetable confirmed by a qualified independent consultant5001.205(e)(2)
    SPUR guaranteed loan (meat, poultry, seafood processing)Administered under 7 CFR 5001 as amended or supplemented by the funding notice; the 5001 study rules above apply unless the notice says otherwise91 FR 67540

    Two more B&I rules bite on meat plants because they employ many people. If a guaranteed loan exceeds $1,000,000 and will increase direct employment by more than 50 jobs, USDA must send project information to the Department of Labor for concurrence [1]. And B&I will not guarantee a project over $1 million that would increase direct employment by more than 50 when there is not enough demand to employ the efficient capacity of existing competitors, unless the assistance will not have an adverse effect on them [1]. With a national average of 149.7 employees per establishment, many mid-size plants cross the 50-job line, so the market chapter of the study has to show that new capacity is needed rather than simply moved.

    What a USDA-grade meat processing feasibility study must prove

    Reviewers read a meat plant study for a short list of make-or-break findings. Each one below maps to an appendix A component, and each needs evidence a credit officer can check.

    #What the study must proveAppendix A componentEvidence a reviewer expects
    1The plant can win and keep a grant of inspection on the planned dateTechnicalSanitation SOPs, recall procedures, hazard analysis and HACCP plan before the grant; validation within the conditional period of up to 90 days [10]
    2Enough animals exist within the sourcing radius, by species and seasonMarket, EconomicCounty inventories, producer letters of intent, competing plants on the same herd
    3Kill floor and cutting room reach the utilisation the debt needsFinancialHead per week by month, ramp curve, custom booking calendar
    4Product has buyers beyond the owner's networkMarketChannel mix and draft offtake terms
    5By-products and waste have a priced outletMarket, EconomicRenderer and hide buyer quotes; disposal cost if no buyer
    6Water and wastewater are permitted and sizedEconomic, TechnicalUtility letters, pretreatment, water quality certification for discharges to navigable waters [10]
    7Trained labour is available at the modelled wageTechnical, FinancialCounty labour market against $50,981 national average pay
    8Construction cost and schedule are firmTechnicalFixed-price contract, contingency, independent budget confirmation for an early guarantee [1]
    9Cash flow covers debt through start-upFinancialQuarterly cash flow through ramp-up, working capital, coverage by year [1]
    10Management can run an inspected plantManagementPlant manager experience, HACCP training, owner guarantees
    11The plant does not just shift jobs or flood a saturated marketMarketCompetitor capacity; 5001.118(b) and Department of Labor tests over $1 million and 50 jobs [1]

    Appendix A's elements, applied to a meat plant [9]:

    Appendix A elementWhat it must cover for meat and poultry processing plants
    Executive summarySpecies, inspection route, design kill and processing capacity per day and per week, total project cost
    EconomicMinimum livestock inputs to run the plant, labour, water and wastewater capacity, supply and offtake contracts, environmental risk, county economic effect
    MarketProducer supply within the sourcing radius, competing inspected and custom plants, channel mix (custom, retail, wholesale, institutional), by-product outlets
    TechnicalPlant layout and flow, refrigeration, rendering or inedible handling, construction risk, labour market for trained cutters
    FinancialRevenue per head and per pound, utilisation ramp, cost per head, working capital for inventory, sensitivity to throughput and livestock prices
    ManagementPlant manager and HACCP-trained staff, ownership of the inspection grant, succession for a family-run plant
    RecommendationA clear finding on whether the plant, at the proposed size and debt, is feasible
    QualificationsIndependent consultant acceptable to the Agency

    Program fit and ineligible uses

    Meat plant financing runs through six routes; the choice changes equity, fees and the size at which a study becomes mandatory.

    RouteFit for meat processingKey termsStudy trigger
    USDA B&I guaranteed loanConstruction, expansion, equipment, acquisition and working capital for rural plantsUp to $25 million per borrower; FY2026 guarantee 85% under $5 million [1][7]Over $1 million to a new business
    USDA SPUR guaranteed loanEstablishing, reopening, retrofitting, expanding or improving meat, poultry or seafood processing; no geographic restrictionAt least $5 billion of loan level from FY2027; 90% guarantee; administered under 7 CFR 5001 [2]Part 5001 rules unless the funding notice changes them
    SBA 7(a)Smaller plants, equipment, acquisitions, working capital75% guarantee over $150,000 [11]SBA may require a study
    SBA 504Owner-occupied buildings and long-life equipmentBorrower 10% (15% new or single-purpose, 20% if both); CDC up to 40% [11]SBA may require a study
    REAPRefrigeration and other energy efficiency improvements at an operating rural plantGrants now paid after completion with 12 months of results; guaranteed loans under 5001 [12]Technical report; study when lender or Agency requires
    Conventional bank loanStrong sponsors with collateral and historyBank policyBank policy

    Community Facilities is not a fit for a commercial meat plant: part 5001 lists inherently commercial enterprises operated to produce profit as ineligible for CF [1]. A slaughter facility owned by a public body or tribe for community food security is a narrower case that should be tested with the Rural Development State Office before the study is scoped.

    Ineligible uses of guaranteed loan funds matter at the budget stage. Part 5001 bars, among other things, payments above actual cost to a related contractor, loan finder or broker fees, payment of federal judgments or tax liens, rental of equipment the borrower already owns, distributions to owners or their families except in an appraised change of ownership, and lease payments [1]. A budget that pays an owner's construction company a margin must be restructured before the study models it.

    Eligibility: rural area, borrower and project

    B&I and SPUR differ on geography. For B&I the project must be in a rural area, meaning any area not in a city or town of more than 50,000 people and not in the urbanized area contiguous and adjacent to such a city, using the latest decennial census; USDA will not approve an application subject to meeting the rural test later [1]. SPUR has no geographic restriction for meat, poultry and seafood processing [2]. The B&I borrower can be a cooperative, corporation, partnership or other legal entity, a tribe, a public body or an individual; individuals must be U.S. citizens or lawful permanent residents, and loans must be secured by fixed assets that remain in the United States [1].

    This page uses non-metro counties only as a proxy; a metro-county site can still be rural under 5001.3, so the study should attach the address-level determination.

    National market evidence: establishments, density, pay and rural footprint

    County Business Patterns counts establishments with paid employees under NAICS 3116, which covers animal slaughtering, meat processed from carcasses, rendering and meat by-product processing, and poultry processing [3]. It does not count custom-exempt operations run only by family members without payroll, so very small plants are undercounted.

    MeasureUnited States
    Establishments with paid employees, 20193,501
    Establishments with paid employees, 20233,716
    Change, 2019 to 2023+215 (+6.1%)
    States (incl. DC) with at least one establishment, 202350
    Establishments per 100,000 residents, 20231.1
    Paid employees, 2023 (mid-March)556,205
    Annual payroll, 2023$28.36 billion
    Average employees per establishment149.7
    Average annual pay per employee$50,981
    Establishments the county file places in a county2,135 (57.5% of the national total)
    Of those, in non-metro counties538 (25.2%) in 137 counties
    Share of U.S. population living in non-metro counties, 202513.6%
    Rural concentration index (non-metro share of establishments / non-metro share of population)1.86

    Non-metro share is computed on the 2,135 establishments the 2023 county file places in a county (57.5% of the national total); establishments not published at county level cannot be classified. Non-metro status follows the OMB July 2023 delineation [5].

    Three readings matter for a lender. First, the industry grew: +215 establishments over four years, with 35 states adding plants and 12 losing them; Montana added the most (+20), so competition for animals differs sharply by state. Second, the average plant is large, 149.7 employees and a payroll of $7,630,719 a year, so a 10 to 30 employee rural plant is a different business from the national average and should be benchmarked against plants its own size. Third, the industry leans rural: an index of 1.86 means non-metro counties hold almost twice the share of plants that they hold of population.

    Top 10 states by establishments, 2023

    RankState20192023ChangePer 100k residentsAvg employeesAvg payNon-metro share*
    1Texas272292+7.4%1.0154.3$50,48818.4%
    2California213231+8.5%0.6102.3$50,5791.4%
    3Illinois154160+3.9%1.3149.2$59,13216.1%
    4Pennsylvania151158+4.6%1.2123.1$57,73814.4%
    5Iowa146149+2.1%4.6228.3$56,63058.4%
    6Ohio134143+6.7%1.288.9$54,48551.2%
    7Missouri128140+9.4%2.3128.3$51,73336.2%
    8New York133138+3.8%0.722.7$53,3508.7%
    9Wisconsin143135-5.6%2.3134.0$59,96042.0%
    10Nebraska117122+4.3%6.1250.3$58,44241.0%
    • Non-metro share of establishments placed in a county by the 2023 county file. The top 10 states hold 44.9% of all U.S. establishments [3].

    Top 10 states by non-metro share

    RankStateNon-metro establishmentsEstablishments in county fileNon-metro shareState population in non-metro countiesLeading non-metro counties
    1Idaho233565.7%25.9%Minidoka County (5); Cassia County (5); Gooding County (4)
    2Iowa457758.4%37.6%Sioux County (11); Crawford County (5); Clinton County (4)
    3Montana203557.1%44.7%Ravalli County (5); Beaverhead County (4); Park County (4)
    4Minnesota213855.3%21.9%Todd County (6); Rice County (4); Goodhue County (4)
    5Ohio448651.2%17.9%Holmes County (8); Tuscarawas County (5); Ashland County (4)
    6Alabama194245.2%21.7%Marshall County (10); Coffee County (3); Cullman County (3)
    7North Carolina286543.1%20.2%Duplin County (10); Stanly County (6); Robeson County (5)
    8Wisconsin4210042.0%25.4%Polk County (6); Dodge County (5); Shawano County (5)
    9Tennessee143441.2%21.1%Henry County (4); Obion County (4); Marshall County (3)
    10Nebraska256141.0%33.6%Buffalo County (8); Dodge County (6); Jefferson County (5)

    States with at least 20 establishments in the county file (33 states qualify). By count rather than share, the most non-metro plants are in Iowa (45); Ohio (44); Wisconsin (42); Texas (32); North Carolina (28) [3][5].

    States that added the most plants, 2019 to 2023

    RankState20192023AddedChange
    1Montana4666+20+43.5%
    2Texas272292+20+7.4%
    3Tennessee6281+19+30.6%
    4California213231+18+8.5%
    5Michigan8699+13+15.1%
    6North Carolina100113+13+13.0%
    7Oklahoma6477+13+20.3%
    8Missouri128140+12+9.4%
    9Kansas7788+11+14.3%
    10Idaho4252+10+23.8%

    Demand drivers and how the study measures them

    Meat plant demand comes from two directions at once: animals that need processing and buyers who need product. A credible study measures both and shows where they meet.

    • Livestock supply: animal inventories in the sourcing counties, the share committed to other plants, and seasonality.
    • Producer demand for slots: booking lead times at existing plants and signed letters of intent with head per month.
    • Retail and direct sales: trade-area population and income, local meat retail, producer brands.
    • Wholesale and institutional buyers: grocery, restaurant and school accounts and whether they require federal inspection.
    • By-product outlets: renderers, hide buyers and pet food makers, and the haul to each.
    • Wild game: seasonal processing that can fill idle capacity under state rules.

    Competition analysis method

    The study should define two markets, not one. The supply market is the area from which animals can be hauled economically; the sales market is where product will be sold. For each, the consultant inventories competing plants by inspection status (federal, state, custom-exempt), species, kill capacity and current utilisation, and then estimates how many head or pounds the new plant can capture without relying on competitors failing.

    • Inventory every plant in the sourcing radius by species, inspection status and capacity.
    • Estimate utilisation from booking lead times and operator interviews.
    • Compare producer demand for slots with available capacity by month.
    • Ramp capture below the gap, backed by signed producer commitments.
    • Test a competitor expanding or cutting its fee.
    • Overcapacity test: for loans over $1 million and more than 50 new jobs, document that existing competitors' efficient capacity is used [1].

    Revenue model and key metrics

    Meat plants earn money in one of three ways, and many combine them. A fee-for-service plant charges producers a kill fee per head and a processing fee per pound and never owns the animal. A packer model buys animals, sells carcasses or boxed cuts and lives on the spread between livestock cost and product price. A retail model sells branded product through a shop, online or to local buyers. The study must state which model drives each revenue line because the risks differ: fee-for-service carries utilisation risk, packer models carry commodity price risk, retail carries marketing risk.

    MetricWhat it measuresHow the study supports it
    Head per day and per week, by speciesKill floor throughputDesign capacity, staffing plan, booking data
    Utilisation of kill and processing capacityActual throughput as a share of designRamp by month, seasonality, sensitivity at lower utilisation
    Hanging weight and cut-out yieldSaleable product per headSpecies and grade mix, cutting specifications
    Revenue per head (fee model) or margin per head (packer model)Unit economicsFee schedule of nearby plants, livestock and wholesale price history
    By-product revenue or disposal cost per headValue or cost of hides, offal, fat and boneBuyer quotes, hauling cost
    Labour hours per head and per poundProductivityLine design, staffing plan, wage benchmark
    Cooler and freezer days on handWorking capital and storage capacityOrder cycle, carcass hang time, inventory policy
    Customer concentrationShare of revenue from the largest buyersOfftake agreements and their terms

    Cost structure, wages and capital items

    Labour is the line most studies underestimate. In 2023 the industry paid $50,981 per employee on average and $7,630,719 in payroll per establishment [3]. A rural plant needs to show that it can recruit cutters and kill-floor staff at the modelled wage, and the sensitivity table should test a higher wage. Other operating lines are livestock purchases in a packer model, packaging, utilities for refrigeration and hot water, wastewater fees or pretreatment, rendering or disposal, insurance, repairs and maintenance, and any inspection charges outside regular hours.

    Capital items the study must price and connect to throughput: land, site work and truck access; livestock pens and unloading sized to the daily kill; kill floor, rail and carcass coolers, which set design throughput; processing room, packaging and freezers, which set saleable pounds; inedible handling; wastewater pretreatment, often a permit condition and a late cost; refrigeration and electrical service; the office and facilities FSIS checks before granting inspection [10]; and a working capital reserve that carries the plant through ramp-up and HACCP validation.

    Financing evidence: SBA lending history and seasoned losses

    SBA loan records are the best public benchmark for how lenders have financed meat processing and how those loans performed. The table counts disbursed 7(a) and 504 loans to NAICS 3116 businesses by approval year, nationally [6].

    Approval years7(a) loans7(a) dollarsAverage 7(a)504 loans504 dollarsAverage 504Jobs reported (both)
    FY2010 to FY2016214$112.5 million$525,65455$49.6 million$902,6365,865
    FY2017 to FY201971$35.2 million$495,75815$14.1 million$942,8671,059
    FY2020 to FY2023132$94.6 million$716,55228$29.5 million$1,054,3932,553
    FY2024 to FY202681$57.0 million$703,67910$31.4 million$3,144,1001,103
    FY2010 to FY2026498$299.3 million$600,947108$124.8 million$1,155,11110,580

    From FY2020 to FY2026, lenders made 213 7(a) loans averaging $711,656 and 38 504 loans averaging $1,604,316 (overall $846,800), or 6.8 SBA loans per 100 establishments.

    ProgramApproval yearsCohort ageLoansCharged offCharge-off rate (count)Charged-off dollars / approved dollarsAverage months to charge-off
    7(a)FY2010 to FY2016seasoned (10 to 16 years)21483.7%2.0%72
    7(a)FY2017 to FY2019maturing (7 to 9 years)7122.8%1.9%61
    7(a)FY2020 to FY2023young (3 to 6 years)13221.5%0.4%62
    7(a)FY2024 to FY2026new (under 3 years)8100.0%0.0%n/a
    504FY2010 to FY2016seasoned (10 to 16 years)5500.0%0.0%n/a
    504FY2017 to FY2019maturing (7 to 9 years)1500.0%0.0%n/a
    504FY2020 to FY2023young (3 to 6 years)2800.0%0.0%n/a
    504FY2024 to FY2026new (under 3 years)1000.0%0.0%n/a

    Only the FY2010 to FY2016 cohort is old enough to show most of its losses. In that cohort 8 of 214 7(a) loans were charged off (3.7%), and charged-off dollars were 2.0% of approved dollars. Losses arrived on average 72 months, about 6.0 years, after approval, which is why a study's sensitivity analysis should look past the first two years. Younger cohorts show fewer charge-offs mainly because they are young. None of the 55 504 loans from FY2010 to FY2016 was charged off.

    USDA activity in states with data

    USAspending reports award counts by Assistance Listing, not by industry, so this table counts all B&I, REAP and Community Facilities awards from 1 October 2023 to 30 September 2026 [13]. It shows where Rural Development is active (643 B&I guaranteed loan awards nationally), not how many went to meat plants.

    StateB&I guaranteed loan awardsREAP grantsREAP guaranteed loansCommunity Facilities awards
    Missouri74309432
    Texas72134340
    Oklahoma37103047
    California3593551
    North Carolina331021287
    Louisiana2872022
    New York281861393
    Florida2467121
    Illinois21459637
    Ohio21268075
    All 51 states with data6436,722751,717

    Top 10 states by B&I awards; all 50 states and DC have data. Counts can include more than one record per project [13].

    Financing structure: B&I and SPUR terms, equity, collateral and going concern

    USDA sets B&I guarantee percentages and fees each fiscal year by Federal Register notice. The FY2026 notice applies to loans obligated in FY2026 [7]. As of 7 November 2026 a FY2027 B&I fee notice had not appeared in the Federal Register, while the SPUR notice of 27 October 2026 set SPUR terms for FY2027 and said SPUR fees will correspond to B&I fees [2].

    FY2026 loan typeGuarantee feeAnnual retention feeGuaranteeExtra fee if guarantee issued before construction completion
    B&I under $5 million3.0%0.55%85%0.50%
    B&I $5 million to $25 million3.0%0.55%80%0.50%
    B&I reduced fee1.0%0.50%80%0.50%
    B&I Alaska high-cost isolated area not on road system1.0%0.50%90%0.50%
    Community Facilities guaranteed1.25%0.50%80%0.50%
    REAP guaranteed1.0%0.25%80%0.50%
    SPUR guaranteed (meat, poultry and seafood processing), FY2027 notice3%0.55%90%0.5%

    The guarantee fee is loan times guaranteed percentage times fee rate, paid once; the retention fee is paid yearly on the guaranteed share of principal outstanding at 31 December [1][7]. The rate is negotiated, fixed or variable, no higher than the lender charges on similar unguaranteed loans, and a variable rate adjusts no more than quarterly. The term is limited to useful life and 40 years, with no balloon, and full principal and interest must start within three years [1].

    Borrower situation at closingMinimum capital or equity (any one test)Rule
    Existing business10% balance-sheet equity (or debt to equity no more than 9 to 1); or 10% of total eligible project costs invested; or owner capital of at least 10% of net fixed assets plus depreciation5001.105(d)(1)
    New business with sales contracts covering debt service for at least the loan term10% balance-sheet equity (or 9 to 1); or 10% of project cost5001.105(d)(2)
    New business, construction, guarantee requested before completion25% balance-sheet equity (or 3 to 1); or 25% of project cost5001.105(d)(3)
    All other new businesses20% balance-sheet equity (or 4 to 1); or 25% of project cost5001.105(d)(4)
    Higher-risk loansAgency may raise the requirement (industry status, concentration, collateral, guarantees, cash flow, contracts, credit rating, strength of the feasibility study, management)5001.105(d)(5)

    Equity must be cash or earning assets on the balance sheet. It cannot include appraisal surplus or a bargain purchase gain, and subordinated debt counts only if the cash stays in the business for the life of the loan [1]. A new meat plant that asks for the guarantee before construction is complete must inject its equity before any guaranteed loan funds are drawn [1].

    Collateral and going concern rules shape the loan amount. Real estate over $250,000 needs a USPAP appraisal; construction projects need as-is and prospective values; any going concern or business value is deducted before the lender discounts the collateral; and appraisals may not be more than one year old [1]. Special-purpose plants often appraise below cost, so the study and appraisal must tell a consistent story. Owners of 20% or more give guarantees [1].

    B&I compared with SBA for the same loan

    FeatureUSDA B&I (FY2026)SBA 7(a)SBA 504
    Guarantee on $850,00085% ($722,500)75% ($637,500)Debenture 100% SBA-guaranteed; bank first lien not guaranteed
    Up-front fee3.0% of guaranteed amount ($21,675)Ceiling $22,313 under 120.2200.5% of debenture plus CDC fees
    Annual fee0.55% of guaranteed balanceUp to 0.55%, paid by lenderUp to 0.9375% of debenture balance plus CDC servicing fee
    Borrower equity10% existing; 20% to 25% newLender credit judgment10%; 15% new or single-purpose; 20% both
    LocationRural area only (5001.3)Anywhere in the U.S.Anywhere in the U.S.
    Feasibility studyRequired over $1 million for a new businessMay be requiredMay be required

    B&I compared with SPUR for the same loan

    ProgramGuaranteeGuaranteed amountLender's unguaranteed shareGuarantee fee (3%)Fee if guarantee issued before construction completionRetention fee, year 1
    USDA B&I, FY2026 (loan under $5 million)85%$722,500$127,500$21,675$25,287$3,885
    USDA SPUR, FY2027 notice90%$765,000$85,000$22,950$26,775$4,113

    On the illustrative loan, SPUR's 90% guarantee covers $765,000 and leaves the lender $85,000 at risk, against $127,500 under B&I. The fee is higher in dollars because it is charged on a larger guaranteed amount. For a plant outside a B&I rural area, SPUR may be the only USDA guarantee available.

    Worked B&I example (illustrative)

    Illustrative only: a loan near the national average SBA loan to meat and poultry processors, with an assumed rate and term. A real study builds net operating income from the plant's own projections.

    ItemIllustrative valueBasis
    Loan amount$850,000National average SBA loan for meat and poultry processing plants, FY2020 to FY2026 ($846,800), rounded
    Rate and term7.50% fixed, 20 years, monthlyAssumption; 5001.401 and 5001.402
    FY2026 guarantee85%: $722,500 guaranteed, $127,500 notB&I under $5 million
    Guarantee fee$21,675 (3.00%); $25,287 if issued before construction completionLoan x guarantee % x fee rate
    Monthly payment / annual debt service$6,848 / $82,171Level amortisation, no balloon
    Retention fee, year 1 / year 10$3,885 / $2,6970.55% x guaranteed principal outstanding
    NOI for 1.00x / 1.25x$82,171 / $102,713Debt service x coverage
    NOI for 1.25x with retention fee$107,569(Debt service + year-1 retention fee) x 1.25
    New business: 25% of cost testCost $1,133,333; equity $283,3335001.105(d)(3), (4)
    New business: 20% balance-sheet testAssets $1,062,500; equity $212,5005001.105(d)(4)
    Existing business: 10% of cost testCost $944,444; equity $94,4445001.105(d)(1)

    At $850,000, the loan sits above the $600,000 line, so the lender files a full application, but below the $1,000,000 line at which a new business must provide a study; USDA can still require one if the lender's analysis is thin [1]. The plant needs net operating income of about $102,713 a year to show 1.25 times coverage, or $107,569 if the lender passes the retention fee to the borrower. A new business would need about $283,333 of equity under the 25% of project cost test.

    How the numbers scale

    B&I loanApplication trackFeasibility studyFY2026 guaranteeGuarantee fee (3.0%)Annual debt serviceNOI for 1.25xNew-business equity at 25% of cost
    $600,000streamlined, 5001.306(b)Agency or lender may require85%$15,300$58,003$72,503$200,000
    $850,000full application, 5001.306(a)Agency or lender may require85%$21,675$82,171$102,713$283,333
    $1,000,000full application, 5001.306(a)Agency or lender may require85%$25,500$96,671$120,839$333,333
    $2,500,000full application, 5001.306(a)required (new business)85%$63,750$241,678$302,097$833,333
    $5,000,000full application, 5001.306(a)required (new business)80%$120,000$483,356$604,195$1,666,667
    $10,000,000full application, 5001.306(a)required (new business)80%$240,000$966,712$1,208,390$3,333,333

    Net operating income needed at different rates and terms

    TermNOI for 1.25x at 6.5%NOI for 1.25x at 7.5%NOI for 1.25x at 8.5%
    15 years$111,066$118,194$125,554
    20 years$95,061$102,713$110,647
    25 years$86,089$94,221$102,666

    Stress test and break-even

    ScenarioNet operating incomeDebt service coverage
    Base case at 1.25x$102,7131.25x
    NOI down 10%$92,4421.12x
    NOI down 20% (break-even)$82,1711.00x
    NOI down 30%$71,8990.87x
    Variable rate 1 point higher, re-amortised$102,7131.16x (debt service $88,518)
    Variable rate 2 points higher, re-amortised$102,7131.08x (debt service $95,077)
    Variable rate 3 points higher, re-amortised$102,7131.01x (debt service $101,835)

    A plant that starts at 1.25 times coverage breaks even on debt service if net operating income falls 20%. Because labour and utilities are largely fixed in the short run, that can happen with a much smaller fall in head processed, so the study should translate the break-even into head per week and utilisation. For a variable-rate loan, a two-point rise in rate on this structure cuts coverage to the level shown above, which is why 5001.202 asks lenders to structure debt for adequate coverage [1].

    Meat processing risks, regulators and how the study tests them

    RiskRegulator or ruleHow the study tests it
    Grant of inspection delayedFSIS: Sanitation SOPs (part 416), recall procedures (part 418) and a validated HACCP plan; conditional grant up to 90 days [10]Schedule with permit milestones, consultant or staff HACCP plan, cash flow that assumes no inspected sales until the grant
    Wrong inspection route for the sales planCustom-exempt product must be marked Not for Sale and used by the owner's household [14]; poultry exemptions end above 20,000 birds a year [15]Match each channel to its inspection status; model revenue only where the route allows sale
    Livestock supply short or seasonalNone; market riskCounty inventory, producer commitments, months with lowest supply
    Low kill capacity utilisationNone; operating riskRamp curve, utilisation sensitivity, break-even head per week
    By-product revenue overstatedState rendering and disposal rulesBuyer quotes; disposal cost scenario
    Wastewater and water supplyClean Water Act certification for discharges to navigable waters [10]; local utility and state permitsCapacity letters, pretreatment cost, permit timeline
    Labour shortageNone; operating riskLocal labour supply, wage stress, training plan
    Overcapacity or job transferB&I 5001.118(b); Department of Labor concurrence over $1 million and 50 jobs [1]Competitor capacity and utilisation analysis
    Construction overrun5001.205(e)(2) conditions for early guaranteeFixed-price contract, contingency, bonding [1]
    Price spread risk in a packer modelNone; market riskLivestock and wholesale price history, margin sensitivity

    Process, timeline, documents and acceptance

    The file moves from eligibility check to lender engagement, study and appraisal in parallel, lender credit analysis, State Office application, conditional commitment, closing and loan note guarantee. Finish the study before the credit memo: 5001.202 requires the lender to evaluate it in writing and substantiate projections that depart from history [1].

    PhaseTimingWhat happens
    Scoping and proposalBefore engagementFifteen-minute call; written proposal with scope, timeline and firm fixed fee within one business day
    Kickoff and data requestWeek 1Engagement letter, data request within 48 hours, kickoff with borrower and lender
    Market analysisWeeks 2 to 4Market area, demand drivers, competitive supply, comparable operators
    Modeling and draftWeeks 4 to 6Five to ten year projection, sensitivity tables, management and technical sections
    Delivery and reviewWeeks 6 to 8Draft, one round of revisions, final PDF and Word report with Excel workbook
    AcceptanceAfter deliveryRevisions at no added cost until USDA or the lender accepts the report

    Phases, timing and acceptance terms are as stated on this site's cost, contact and about pages [8][16][17].

    Documents the lender and Agency will look for

    • Financial statements of the business and affiliates to Agency-acceptable standards; a tax return alone is not acceptable [1].
    • Pro forma closing balance sheet and projections showing the equity test [1].
    • Budget, construction contract and schedule.
    • Inspection plan and HACCP status [10].
    • Producer and buyer commitments; utility capacity letters.
    • Management resumes and owners of 20% or more; appraisal and environmental review.

    Common review failures in meat plant studies

    • Revenue starts on day one, ignoring the time to win and validate the grant of inspection.
    • Throughput is taken from equipment nameplate rather than staffing and booking data.
    • Producer interest is shown with surveys but no letters or contracts.
    • By-products are treated as revenue when local buyers pay nothing or charge for pickup.
    • Wastewater pretreatment is left out of the budget.
    • Wages are set below the local market for skilled cutters.
    • Projections depart from the plant's history without explanation, which 5001.202 requires lenders to substantiate [1].
    • The study is not independent: a contractor or equipment seller prepares it.

    Hiring a meat processing feasibility study consultant for a USDA loan

    You need an independent consultant whenever a B&I or SPUR guaranteed loan over $1,000,000 goes to a new business, because 5001.306(a)(3)(i) requires the study to be prepared by an independent qualified consultant acceptable to the Agency, with scope set by the Agency [1]. Below that size, the lender or USDA may still ask for one, and many lenders do for start-up plants. Independence means the consultant has no stake in the plant, its contractor or its equipment vendors.

    On this site, an engagement covers all five Part 5001 components (economic, market, technical, financial and management), a five to ten year projection with sensitivity analysis, market area and demand analysis, a competitive supply inventory, comparable operator benchmarks, a management assessment, the report in PDF and Word with an Excel workbook, a kickoff call and one midpoint call, one round of revisions and a written acceptance guarantee [8]. Environmental site assessments, engineering, legal work, appraisals, grant or lender package drafting and detailed construction estimating are separate [8].

    What you provide: the project description and budget, the site and its eligibility status, historical financials if the business exists, the inspection plan, producer and buyer commitments, utility letters, and management resumes. The site's pages say a structured data request goes out within the first one to two business days after the engagement letter, and that borrower data delays are the most common reason engagements run long [17].

    Timeline and how to start: the site's standard schedule is 4 to 8 weeks, with B&I engagements typically 6 to 9 weeks depending on complexity and a rush option of 3 to 4 weeks [8]. To start, send the project description through the contact page or email info@usda-feasibility-study.com. The site states that a senior analyst responds within one business day with a scoped proposal or follow-up questions, and that every proposal quotes a firm fixed fee before you sign [16].

    Request a scoped proposal for your meat processing feasibility study at usda-feasibility-study.com/contact.

    Precedents

    Precedent here means public evidence that lenders and USDA have financed similar plants. The SBA record above shows 606 SBA loans worth $424.0 million to meat and poultry processors from FY2010 to FY2026 [6]. This site's state pages also cite publicly announced USDA-funded meat projects as program evidence, for example Better For Butchery in Caldwell County, Kentucky ($2.5 million Rural Development loan) and Cedar County Meat Market in Missouri (two B&I guarantees), and its case study library includes a meat processing B&I case study for an independent capacity expansion in Missouri [18]. Those examples are reported as the site states them; the site does not present them as its own engagements.

    Meat processing feasibility study pages by state

    The site has 35 state pages for meat processing. Each covers that state's plants, rural counties and SBA lending in more detail.

    State pageEstablishments, 2023Non-metro shareSBA 7(a) and 504 loans, FY2020 to FY2026
    Alabama7845.2%2
    Alaska80.0%2
    Arizona260.0%1
    California2311.4%15
    Colorado838.0%13
    Connecticut170.0%2
    Delaware1272.7%0
    Florida620.0%5
    Georgia11820.4%3
    Hawaii2031.6%1
    Idaho5265.7%4
    Illinois16016.1%11
    Indiana8529.0%6
    Iowa14958.4%7
    Kansas8840.9%4
    Kentucky6247.4%3
    Louisiana5916.0%3
    Maryland3217.4%2
    Massachusetts340.0%1
    Michigan9927.6%8
    Missouri14036.2%12
    Nebraska12241.0%10
    Nevada160.0%1
    New Jersey690.0%4
    New Mexico3021.4%2
    New York1388.7%7
    North Carolina11343.1%1
    Ohio14351.2%11
    Oklahoma7718.2%6
    Oregon5429.4%3
    Pennsylvania15814.4%5
    South Carolina420.0%0
    Texas29218.4%16
    Utah4129.6%7
    Virginia6528.6%1

    Establishments and non-metro share from County Business Patterns 2023; SBA loans counted by project state [3][6].

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    How much does a meat processing feasibility study cost?

    On this site, B&I engagements are quoted as a firm fixed fee in a written proposal. The cost page lists $6,900 to $12,500 for standard B&I studies (loans of $1 million to $10 million, single site) and $10,500 to $14,500 for complex studies (loans over $10 million, phased or multi-site projects, limited comparable data). A rush engagement adds 20% to 35% [8].

    How long does a meat processing feasibility study take?

    The site's standard schedule is 4 to 8 weeks from signed engagement letter to final report, with standard B&I work at 6 to 7 weeks and complex B&I work at 7 to 9 weeks. A rush option delivers in 3 to 4 weeks, subject to analyst capacity [8]. The borrower's speed in returning the data request is the main variable.

    Do I need a feasibility study for a USDA meat processing loan?

    Yes if the B&I or SPUR loan is over $1,000,000 and the borrower is a new business, including one that has not reached stable operations or is moving into a new market or labour area [1]. Below that, USDA may still require one when the lender's analysis is not sufficient.

    Who can prepare a meat processing feasibility study for USDA?

    For new-business loans over $1 million, an independent qualified consultant acceptable to the Agency [1]. The consultant should not be the builder, equipment vendor or a party to the loan. Appendix A asks the study to include the author's qualifications and prior experience [9].

    How long is a feasibility study valid?

    Part 5001 does not print an expiry date for feasibility studies. It does require appraisals to be no more than one year old [1], and this site works to an 18-month data recency standard for USDA studies [8]. If the project, market or financing changes materially, expect the lender to ask for an update.

    Can one study serve both SBA and USDA?

    Usually, if it is written to the stricter standard. SBA may require a study [11] but does not prescribe the appendix A structure, so a Part 5001 study normally satisfies an SBA lender too, provided its financing section models each structure under consideration.

    What is the difference between B&I and SPUR for a meat plant?

    Both run under 7 CFR part 5001. SPUR is limited to meat, poultry and seafood processing, carries a 90% guarantee in FY2027 against 85% or 80% for B&I in FY2026, requires the lender to keep at least 10% of the loan, and has no rural area restriction [2][7]. Check the full SPUR funding notice for any differences in eligible uses or documentation.

    Does USDA need a grant of inspection before it will guarantee the loan?

    Part 5001 does not require it before closing, but FSIS grants inspection only after Sanitation SOPs, recall procedures and a HACCP plan are in place, and the first grant is conditional for up to 90 days [10]. The study must show the plant carries its debt through that period.

    What should a meat processing feasibility study consultant ask me for first?

    Budget and site, species and capacity, inspection route, producer and buyer commitments, utility capacity, and financial statements if the business exists. These decide which equity test applies and whether a study is mandatory.

    How does the study handle custom-exempt work?

    Custom slaughter for owners is exempt from inspection only if the product is for the owner's household and is marked Not for Sale [14]. The study models custom revenue separately from inspected product and shows whether the plant needs a federal grant for the rest of its sales plan.

    What debt service coverage does USDA require?

    Part 5001 sets no fixed ratio; lenders must structure debt for adequate coverage and analyse global historical and projected coverage [1]. Many look for 1.25 times, the level used in the worked example.

    Can REAP help a meat plant?

    Since 16 October 2026, REAP grants go to projects already built and operating with 12 months of energy data, capped at $250,000 for efficiency improvements [12]. An existing rural plant can use REAP for refrigeration upgrades once it has the data.

    Sources

    [1] 7 CFR part 5001, OneRD Guaranteed Loans (CFR 2026 edition, title 7 vol. 15, revised 1 Jan 2026), govinfo. https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml (accessed 7 Nov 2026)

    [2] USDA RBCS, Notice of Funding Opportunity for the Strengthening Processing for US Ranchers (SPUR) Guaranteed Loan Program for Fiscal Year 2027, 91 FR 67540 (27 Oct 2026). https://www.govinfo.gov/content/pkg/FR-2026-10-27/html/2026-21858.htm (accessed 7 Nov 2026)

    [3] U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files. https://www2.census.gov/programs-surveys/cbp/datasets/2023/cbp23st.zip ; https://www2.census.gov/programs-surveys/cbp/datasets/2023/cbp23co.zip ; https://www2.census.gov/programs-surveys/cbp/datasets/2019/cbp19st.zip (accessed 7 Nov 2026)

    [4] U.S. Census Bureau, Vintage 2025 county population estimates (co-est2025-alldata). https://www2.census.gov/programs-surveys/popest/datasets/2020-2025/counties/totals/co-est2025-alldata.csv (accessed 7 Nov 2026)

    [5] OMB metropolitan and micropolitan statistical area delineation file, July 2023 (list1_2023). https://www2.census.gov/programs-surveys/metro-micro/geographies/reference-files/2023/delineation-files/list1_2023.xlsx (accessed 7 Nov 2026)

    [6] U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: FOIA_7a_FY2010_FY2019, FOIA_7a_FY2020_Present, FOIA_504_FY2010_Present. https://data.sba.gov/sites/default/files/uploaded_resources/FOIA_7a_FY2020_Present_asof_260930.csv (and companion files) (accessed 7 Nov 2026)

    [7] USDA, OneRD Annual Notice of Guarantee Fee Rates, Periodic Retention Fee Rates, Loan Guarantee Percentage and Fee for Issuance of the Loan Note Guarantee Prior to Construction Completion for Fiscal Year 2026, 91 FR 11272 (9 Mar 2026). https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm (accessed 6 Nov 2026)

    [8] usda-feasibility-study.com, USDA Feasibility Study Cost & Timeline (site page). https://usda-feasibility-study.com/usda-feasibility-study-cost (read 7 Nov 2026)

    [9] OneRD Guaranteed Loan Regulation, 85 FR 42494 (14 Jul 2020), appendix A to subpart D of part 5001, Elements of an Acceptable Feasibility Study, pp. 42556-42557. https://www.govinfo.gov/content/pkg/FR-2020-07-14/pdf/2020-13991.pdf (accessed 7 Nov 2026)

    [10] 9 CFR part 304, Application for Inspection; Grant of Inspection (CFR 2026 edition). https://www.govinfo.gov/content/pkg/CFR-2026-title9-vol2/xml/CFR-2026-title9-vol2-part304.xml (accessed 7 Nov 2026)

    [11] 13 CFR part 120, Business Loans (CFR 2026 edition), govinfo; sections 120.101, 120.150, 120.160, 120.210, 120.220, 120.801, 120.900 to 120.971. https://www.govinfo.gov/content/pkg/CFR-2026-title13-vol1/xml/CFR-2026-title13-vol1-sec120-160.xml (accessed 7 Nov 2026; other sections accessed 6 Nov 2026)

    [12] USDA RBCS, Unleashing American Energy and Economic Prosperity; Rural Energy for America Program (REAP), final rule with comment period, 91 FR 62600 (1 Oct 2026), effective 16 Oct 2026. https://www.govinfo.gov/content/pkg/FR-2026-10-01/html/2026-20178.htm (accessed 7 Nov 2026)

    [13] USAspending.gov, award counts by place of performance for Assistance Listings 10.768 (B&I), 10.766 (Community Facilities) and 10.868 (REAP), 1 Oct 2023 to 30 Sep 2026, API v2 spending_by_award_count. https://api.usaspending.gov/api/v2/search/spending_by_award_count/ (accessed 7 Nov 2026)

    [14] 9 CFR part 303, Exemptions (CFR 2026 edition). https://www.govinfo.gov/content/pkg/CFR-2026-title9-vol2/xml/CFR-2026-title9-vol2-part303.xml (accessed 7 Nov 2026)

    [15] 9 CFR 381.10, Exemptions for specified operations (poultry) (CFR 2026 edition). https://www.govinfo.gov/content/pkg/CFR-2026-title9-vol2/xml/CFR-2026-title9-vol2-sec381-10.xml (accessed 7 Nov 2026)

    [16] usda-feasibility-study.com, Contact & Request a Proposal (site page). https://usda-feasibility-study.com/contact (read 7 Nov 2026)

    [17] usda-feasibility-study.com, About (site page). https://usda-feasibility-study.com/about (read 7 Nov 2026)

    [18] usda-feasibility-study.com, Case Studies and Engagements (site pages). https://usda-feasibility-study.com/case-studies ; https://usda-feasibility-study.com/engagements (read 7 Nov 2026)

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours