USDA Feasibility Study for Food Processing in Iowa

    NAICS 311999

    Food processing projects in Iowa range from freeze-dried egg manufacturing to value-added meat and dairy. An independent feasibility study consultant documents offtake and pricing, input supply, and food-safety capital, and tests throughput against contracted volumes.

    Iowa's food manufacturing base, leaving out meat, counted 354 plants in 2023, and 54.6% of those Census could place by county sit in non-metro counties. Those plants pay $76,247 per employee, 30.9% above the national average, and Iowa's seasoned SBA food manufacturing loans failed at 11.8% against 7.4% nationally. That combination, a rural and well-paid industry with a weak small-loan record, is what an Iowa food processing study has to explain to a lender.

    Data current as of November 2026.

    Program Fit

    B&I and Food Supply Chain guarantees both apply; SPUR covers meat, poultry and seafood processing at a 90 percent guarantee with no geographic restriction.

    Food processors in Iowa can draw on more USDA and state programs than most borrowers, but each has a product or ownership condition attached.

    OptionHow it serves an Iowa food processing projectCondition to check
    USDA B&I guaranteeNew plants, line additions, co-packing and value-added processing of crops, dairy, eggs and specialty foods in towns that pass 7 CFR 5001.385% under $5 million, 80% from $5 million to $25 million (91 FR 11272); $25 million per borrower (5001.406(c))
    SPUR guaranteeMeat, poultry and seafood processing; the hub says egg processors qualify and that the facility can sit inside an excluded city90% guarantee, 3% fee, 0.55% retention, lender keeps at least 10% (FR Doc. 2026-21858, per the hub); not available to bakery, dairy or crop processors
    Food Supply Chain guaranteeThe program behind Nutriom's $11,100,000 Panora guarantee (2022) and Jordan's Meat Market in Marcus (2023)A past program on the Iowa record; current availability is not in the inputs
    SBA 7(a) and 504Smaller plants and equipment; 21 Iowa food manufacturing 7(a) loans and 6 504 loans in FY2020 to FY20267(a) 75% guarantee above $150,000 (13 CFR 120.210); 504 owner injection 10% to 20% (120.910)
    REAPEfficiency and on-site energy at an operating plant: refrigeration, boilers, dryers; Iowa received 586 REAP grants in FY2024 to FY2026, the most of any stateGrants up to 25% of cost after 12 months of operating data (91 FR 62600, per the hub)
    Iowa and cooperative capitalChoose Iowa Value-Added Grants (up to $25,000 cost-share) and REDLG pass-throughs for manufacturing through Iowa cooperativesSmall grants and cooperative loans that can sit beside the senior debt; rounds are periodic

    Product decides the program. A plant that processes meat, poultry or, on the hub's reading, eggs may compare SPUR's 90% guarantee with B&I; a dairy, bakery, snack, beverage ingredient or crop processor uses B&I or SBA. The hub flags one open question worth settling before scoping: whether SPUR's seafood coverage reaches aquaculture processing, which matters for projects like the Ellsworth tilapia farm. Ineligible-purpose screens are mostly straightforward for food plants, but a processor that also produces farm commodities should have the lender confirm how Part 5001 treats agricultural production before the study is commissioned, since the December 2025 technical amendments revised 5001.105(b)(7) on that point.

    When a food plant needs the independent study

    Most new food plants of any scale cross the rule. A newly formed processing company with more than $1,000,000 of guaranteed debt is the compulsory case: 7 CFR 5001.306(a)(3)(i) then requires an independent study from a consultant the Agency accepts, scoped by the Agency; below that, 5001.306(a)(3)(ii) lets the Agency require one. Loans above $600,000 take the full 5001.306(a) path with a pro forma balance sheet at closing, and $600,000 or less is streamlined. Add Department of Labor concurrence if the loan tops $1,000,000 and the plant will add more than 50 jobs (5001.306(a)(1)), a common outcome when Iowa food plants average 66.3 workers. Expansions by established processors are not automatically exempt: the 5001.202 evaluation lists the feasibility study, the market study and construction complexity among its 'conditions', and offtake changes on a large line addition usually prompt the request.

    What the Study Covers

    Framed to the scope required by 7 CFR Part 5001 Appendix A for OneRD guaranteed loan submissions.

    • Market demand and competitive supply analysis
    • Technical and site feasibility, including environmental considerations
    • Five to ten year financial projections with DSCR, DCF, and sensitivity analysis
    • Management and operational capacity assessment
    • Economic feasibility and rural community impact

    For an Iowa food plant the market chapter documents customers, signed or letter-of-intent offtake by volume and price, competing processors and freight to market. The technical chapter covers process flow, food safety design, utilities (water, wastewater, power, gas), input supply by radius and season, and equipment lead times. The financial chapter models throughput against capacity month by month, yields and shrink, input cost exposure, payroll at Iowa food plant wages and coverage under input-price and volume shocks.

    Iowa Market Evidence

    Nutriom's Crystal Freeze Dry in Panora received an $11,100,000 Food Supply Chain guarantee in 2022 to expand freeze-dried egg manufacturing, the state's largest named food-processing precedent.

    Food manufacturers (excluding meat) in Iowa: market evidence

    Iowa: food manufacturing (excluding meat), supply and rural footprint

    MeasureIowaUnited States
    Establishments, 2019 → 2023335 → 354 (+5.7%)24,589 → 27,414
    Per 100,000 residents (2023)11.08.1
    Average employees per establishment66.342.0
    Average annual pay per employee$76,247$58,248
    Share of establishments in non-metro counties54.6% (208 in 45 counties)
    Share of state population in non-metro counties (2025)37.6%

    Non-metro counties with the most food manufacturing (excluding meat) (2023): Cerro Gordo County (10); Sioux County (10); Buena Vista County (9); Lee County (7); Webster County (7); Dickinson County (6).

    Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.

    Iowa has 35.3% more food plants per resident than the nation (12th of 51 states and the District of Columbia), but its growth trailed: up 5.7% from 2019 to 2023 against 11.5% nationally. The national expansion came from small makers; Iowa's base is weighted toward large operations. The average Iowa plant employs 66.3 people against 42.0 nationally, and 25 plants employ 250 or more, while 188 (53.1%) have fewer than 20.

    Pay is the benchmark a reviewer will check first. Iowa food manufacturing pays $76,247 on average, 30.9% above the national $58,248, with payroll averaging $5,058,568 per plant. The large, capital-intensive grain and oilseed plants in Iowa's total pull that average up, so a 15-person specialty plant should not budget at it; it should show the wage it will pay and why workers will take it in a labor market with high-paying plants nearby. Expect challenge on any study that treats Iowa's density as a sign of untapped capacity, projects throughput near nameplate in the first year, or assumes inputs at today's price without a commodity case.

    Iowa food manufacturers (excluding meat) by employment size, 2023 (computed from the Census CBP state file)

    Employees per establishmentEstablishmentsShare of 354
    Fewer than 5 employees8223.2%
    5 to 94412.4%
    10 to 196217.5%
    20 to 497420.9%
    50 to 993610.2%
    100 to 249318.8%
    250 or more257.1%

    Demand drivers and how competition is measured

    Food processing is a rural industry in Iowa. Non-metro counties hold 54.6% of the county-placed plants but 37.6% of residents, so rural density is 17.1 plants per 100,000 non-metro residents against 8.6 in metro counties, about twice as high. Plants locate near crops, milk, eggs and rail rather than near consumers, and the county leaders reflect that: Cerro Gordo (10) and Sioux (10) lead, Buena Vista (9), around Storm Lake, has 44.0 plants per 100,000 residents, 4.0 times the state rate, and Lee (7), Webster (7) and Dickinson (6) follow.

    Demand for a new plant is not population; it is customers. The study names buyers, volumes and prices, distinguishes contracted from expected sales, and tests concentration: a plant selling most of its output to one buyer carries that buyer's credit and switching risk. Input supply is the second half of demand. For egg, poultry and turkey inputs Iowa's avian influenza record matters: the hub reports Sioux County layer outbreaks of about 4.2 million birds in 2024 and 1.6 million and 4.3 million birds in December 2024, plus turkey flocks in Palo Alto, Sac and Buena Vista counties. Competition is analysed product by product: other processors, private-label suppliers and imports serving the same buyers, with capacity and price positioning.

    Revenue model, cost structure and capital items

    Revenue is units sold times net price after freight, slotting, rebates and co-packing fees, built from customer contracts and a ramp to stable throughput. Yield and shrink drive gross margin, so the model works from input cost per unit of finished product rather than a flat margin. Costs are inputs and packaging, labor at Iowa food plant pay (average $76,247), utilities and wastewater charges, food safety testing and audits, maintenance, insurance and freight. Capital items are land and building, process equipment, refrigeration and freezer space, wastewater pretreatment, packaging lines, food safety upgrades, start-up costs and working capital to carry inventory and receivables through the ramp. Commodity exposure needs its own sensitivity table: a processor buying eggs, grain or milk at market faces input swings that can erase a year's coverage cushion.

    Rural footprint and B&I eligibility in Iowa

    The pack places 208 of 381 county-located Iowa food plants (54.6%) in 45 of the state's 77 non-metro counties under the July 2023 OMB delineation, led by Cerro Gordo County (10); Sioux County (10); Buena Vista County (9); Lee County (7); Webster County (7); Dickinson County (6). That share makes food processing one of the more B&I-friendly asset classes in Iowa, but the county label is still only a proxy for 7 CFR 5001.3, which excludes cities and towns above 50,000 and their contiguous and adjacent urbanized areas.

    The hub's 2020 figures put 1,007,009 Iowans in the 11 cities over 50,000, capping eligible territory at 68.4% of residents. Industrial parks on the edges of Sioux City, Waterloo, Cedar Rapids, Davenport and Dubuque need a dated map check, while Ellsworth (Hamilton County), Marcus (Cherokee County), Storm Lake (Buena Vista County) and Sioux Center and Orange City (Sioux County) sit in non-metro counties. Panora, home of the Nutriom plant, sits in Guthrie County, which the 2023 delineation places in the Des Moines metro area, a reminder that metro counties contain small rural towns. SPUR is the exception the hub notes: it carries no rural-area restriction, so a meat, poultry or egg plant inside an excluded city can still qualify. The Iowa state hub holds the town screen, and the B&I eligibility check the parcel method.

    Financing benchmarks: USDA B&I next to SBA

    Iowa: SBA lending to food manufacturing (excluding meat)

    Period7(a) loans7(a) dollars504 loans504 dollars
    FY2010 to FY201634$12.6 million10$11.7 million
    FY2017 to FY20195$5.0 million5$5.6 million
    FY2020 to FY202314$7.2 million4$2.5 million
    FY2024 to FY20267$3.8 million2$2.2 million

    Average 7(a) loan, FY2020 to FY2026: $524,514. Average 504 loan: $788,167. Of the 34 7(a) loans approved in FY2010 to FY2016 for Iowa food manufacturing (excluding meat), 11.8% were charged off (national: 7.4% of 3,150), on average 47 months after approval.

    Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).

    SBA food manufacturing loans in Iowa are small and slightly above the national average: $524,514 in FY2020 to FY2026 against $484,253 nationally (8.3% higher), with 504 loans averaging $788,167. Volume has fallen from 34 7(a) loans in FY2010 to FY2016 to 7 in FY2024 to FY2026. Borrowers reported 287 jobs on 21 recent 7(a) loans, 13.7 per loan, so SBA is financing the small end of the industry.

    The loss record is the warning. Of 34 Iowa loans approved in FY2010 to FY2016, 4 were charged off, 11.8% against 7.4% nationally, 1.6 times the national rate, on average 47 months after approval. Measured in dollars the gap is wider: 25.5% of the Iowa cohort's approved amount was charged off against 3.6% nationally (computed from the pack data), which means the larger loans failed. A reviewer will read that as a reason to test offtake, input cost and management depth harder on small Iowa food plants than the national record would suggest.

    B&I terms for loans obligated in fiscal 2026, read for an Iowa food processing plant

    TermRuleWhat it means for an Iowa food processing plant
    Guarantee85% under $5 million; 80% from $5 million to $25 million (91 FR 11272); SPUR 90% for eligible meat, poultry and seafood plants (per the hub)Small plants sit in the 85% tier; a new plant like Nutriom's expansion would fall in the 80% tier
    Upfront fee3.0% of the guaranteed amount; reduced-fee option 1.0% with an 80% guarantee; 0.50% more if the guarantee issues before construction is complete (91 FR 11272; 5001.454)A plant built with the guarantee in place pays the extra 0.50%
    Annual retention fee0.55% of the guaranteed share outstanding on December 31, fixed for life (5001.455)Carry it as a financing cost in every year of the projection
    TermUseful life up to 40 years, no balloon; first full payment within 3 years (5001.402)Equipment-heavy plants blend 10 to 15 year equipment lives with longer building lives
    RateNegotiated, fixed or variable, no higher than the lender's comparable loans; variable resets at most quarterly (5001.401)Pair the rate case with the input-cost case; both hit coverage at once
    EquityNew business with sales contracts adequate for debt service over the loan term: 10% (5001.105(d)(2)); other new businesses 25% of cost or 20% of the balance sheet; construction closing early 25%; existing 10% (5001.105(d))Signed offtake contracts can cut a new plant's equity requirement from 25% to 10%, which makes contract terms a financing item, not just a market item
    CollateralAppraisal for real estate above $250,000; as-is and prospective values; going-concern value deducted before discounting (5001.203)Process equipment is discounted heavily; specialized buildings appraise below cost
    GuarantorsOwners of 20% or more guarantee for the full term (5001.204)Cooperatives and investor groups need a guarantor plan early

    Two loan sizes dominate Iowa food processing. Small plants borrow near the SBA average of $520,000, below both the streamlined and the study thresholds, while new plants and major lines run into the millions; Nutriom's $11,100,000 guarantee alone exceeds the combined $11,014,800 of all 21 Iowa food manufacturing 7(a) loans in FY2020 to FY2026. B&I use in Iowa is thin across industries (2 loan awards in FY2024 to FY2026, 41st of 51), so a large food plant file will stand out. The equity rule is the lever to plan around: a new plant with sales contracts that cover debt service for the full loan term qualifies at 10% under 5001.105(d)(2), against 25% without them.

    Worked example (illustrative)

    Inputs. Loan A is $525,000, the pack's FY2020 to FY2026 Iowa food manufacturing 7(a) average of $524,514 rounded. Loan B is $6,000,000, an illustrative size for a new processing plant or major line in the 80% tier, not a specific project. Both use a 7.25% fixed rate and 15-year amortization, reflecting equipment lives, within 5001.401 and 5001.402. Fees follow the FY2026 notice, and the 1.25x coverage line is the test most lenders apply rather than a rule.

    LineLoan A: near the Iowa SBA food plant averageLoan B: illustrative new processing line or plant
    Loan amount$525,000$6,000,000
    Guarantee percentage (91 FR 11272)85%80%
    Guaranteed amount$446,250.00$4,800,000.00
    Unguaranteed portion the lender holds$78,750.00$1,200,000.00
    Upfront guarantee fee, 3.0% of the guaranteed amount$13,387.50$144,000.00
    First-year retention fee, 0.55% of the guaranteed share of the full balance (upper bound)$2,454.38$26,400.00
    Second-year retention fee on the balance after 12 payments$2,360.37$25,388.89
    Illustrative rate and amortization7.25% fixed, 15 years, monthly7.25% fixed, 15 years, monthly
    Monthly payment$4,792.53$54,771.77
    Annual debt service$57,510.36$657,261.27
    Net operating income needed for 1.25x coverage$71,887.95$821,576.59
    Cushion above 1.00x coverage$14,377.59$164,315.32
    Cushion expressed as full-time jobs at the Iowa average food manufacturing pay ($76,247, before benefits)0.192.16
    Interest-only year, if used during start-up (first full payment within 3 years, 5001.402)$38,062.50$435,000.00
    Annual debt service at a rate 2.00 points higher$64,839.11$741,018.45
    Coverage at that higher rate on the same income1.11x1.11x
    Coverage if income comes in 10% below plan1.12x1.12x
    New business: equity at 25% of project cost (5001.105(d)(4))$175,000.00 on $700,000.00$2,000,000.00 on $8,000,000.00
    New business: equity at 20% of the balance sheet (debt to equity 4:1, loan as the only debt)$131,250.00$1,500,000.00
    Existing business: equity at 10% of project cost (5001.105(d)(1))$58,333.33 on $583,333.33$666,666.67 on $6,666,666.67
    Reduced-fee option (1.0% fee, 0.50% retention, 80% guarantee): upfront fee$4,200.00$48,000.00
    Independent study mandatory for a new business (5001.306(a)(3)(i))No; Agency may require; streamlined application at $600,000 or lessYes, above $1,000,000
    SBA 7(a) alternative: guaranteed share and guaranty fee ceiling (13 CFR 120.210, 120.220)75%, $393,750.00 guaranteed, fee ceiling $11,812.50not computed (loan above $5,000,000)
    New business with sales contracts covering debt service for the loan term: equity at 10% of project cost (5001.105(d)(2))$58,333.33$666,666.67

    What the numbers say. Loan B needs $821,576.59 of net operating income, and the cushion above break-even, $164,315.32, equals only 2.16 full-time positions at Iowa food plant pay, because those wages are high. A short amortization makes debt service heavy: $657,261.27 a year on Loan B. A two-point rate rise lowers coverage to 1.11x, and a 10% fall in income, which a single lost customer or an input price spike can cause, takes it to 1.12x. The equity lines show why offtake matters: a new business needs $2,000,000.00 under the 25% project-cost test, but $666,666.67 if signed sales contracts cover debt service for the loan term. Loan A, at $525,000, falls under the $600,000 streamlined line; whether a study is needed there is for the Agency and lender to decide.

    What a lender-grade food processing feasibility study in Iowa must prove

    A food processing study that holds up before an Iowa lender and the state office proves these points.

    1. The plant site passes 7 CFR 5001.3 on a dated map, or the project qualifies for SPUR, which the hub says has no rural restriction.
    2. Named customers with volumes, prices and terms, separating signed contracts from letters of intent, and testing concentration in the largest buyer.
    3. Whether those contracts meet 5001.105(d)(2), covering debt service for a term at least as long as the loan, which sets equity at 10% instead of 25%.
    4. Input supply by radius and season, with an avian influenza downtime case for egg, poultry and turkey inputs given Iowa's 2024 outbreaks.
    5. Throughput ramped month by month from commissioning, with yields and shrink from comparable plants rather than the equipment vendor's brochure.
    6. Labor at a wage that competes with Iowa food plants averaging $76,247, with a recruitment plan for the county.
    7. Utilities and wastewater capacity confirmed in writing, with pretreatment costs in the capital budget.
    8. A commodity input sensitivity table alongside the rate and volume stress lines.
    9. Management depth, because Iowa's seasoned SBA food manufacturing loans failed at 11.8%, 1.6 times the national rate.
    10. Collateral on discounted equipment and a specialized building, with going-concern value removed (5001.203).

    Risks and mitigants in Iowa

    RiskWhy it matters hereHow the study tests or mitigates it
    Customer concentrationSmall plants often sell to one distributor or brand ownerContract review; downside without the largest customer
    Animal disease and input supplySioux County layer outbreaks of about 4.2 million birds in 2024 and two more in December 2024 (hub)Downtime and alternative-supply scenario; insurance review
    Commodity pricesEgg, grain and milk inputs move with marketsInput sensitivity table; pass-through clauses in contracts
    Labor competitionIowa food plants pay 30.9% above the national averageWage benchmarking against nearby plants; staffing ramp
    Food safety and recallsA recall can stop shipments and cost customersFood safety design, testing budget and recall insurance in the technical chapter
    Construction and commissioningProcess equipment lead times and start-up yieldsFixed-price contract, contingency and equity injected first (5001.205(e)(2)); quarterly start-up cash flow (5001.202)
    Program policyFY2027 budget request proposes ending B&I; SPUR terms rest on a 2026 notice (hub)Disclosure; program choice confirmed at application

    Process, documents and why studies are sent back

    An Iowa food plant file runs on two clocks, the lender's and the customer's. The sponsor settles product, site and program (B&I, SPUR or SBA) with an approved lender, secures offtake terms, and engages the consultant against the lender's credit memo format; the lender then files with USDA Rural Development's Iowa state office, and for plants where the guarantee issues before construction ends, the lender also needs the quarterly start-up cash flow and construction schedule 5001.202 calls for.

    The sponsor provides customer contracts or letters of intent, input supply agreements, the process flow and equipment quotes, the construction budget, utility and wastewater letters, food safety plans, management resumes, historical statements for an existing business, and guarantees from 20% owners (5001.204). The appraisal and environmental work are commissioned separately.

    Food processing studies are returned for unsigned or vague offtake, throughput that reaches capacity too fast, no input-price case, wages set below what nearby plants pay, missing wastewater costs, and the tone of advocacy the hub calls the most common reason Iowa files stall.

    Program examples

    Iowa program example: Crystal Freeze Dry LLC (Nutriom), Panora

    $11,100,000 (Food Supply Chain guarantee, 2022)

    Freeze-dried egg manufacturing in Panora, Guthrie County, listed in the Iowa hub's precedent file. It is the largest named Iowa food processing precedent, and an egg-based plant is exactly the kind of project where the avian influenza case belongs in the study.

    Iowa program example: Eagle's Catch, Ellsworth

    $2,300,000 (B&I CARES Act loan, 2020)

    A tilapia farm in Ellsworth that received the country's first B&I CARES Act loan, per the hub (Business Wire, 2020). Aquaculture projects should confirm whether SPUR's seafood coverage applies before choosing a program.

    Hiring a USDA food processing feasibility study consultant in Iowa

    You need a food processing feasibility study consultant in Iowa when a new business seeks a guaranteed loan above $1,000,000 (5001.306(a)(3)(i)); for smaller loans and expansions the Agency or lender may ask, and on a new line with new customers they usually will. Independence means no equity in the processor, no role in selling equipment or the site, and no fee tied to approval.

    The engagement delivers the five Part 5001 components, a five to ten year projection with sensitivities, the market and customer analysis, a competitive supply inventory, operator benchmarks, a management assessment, reports in PDF and Word with the Excel model, kickoff and midpoint calls, one revision round, and the written acceptance guarantee. It does not include engineering, appraisal, environmental or legal work, or construction cost estimating beyond high-level benchmarking.

    The cost and timeline page quotes standard B&I studies at $6,900 to $12,500 over six to seven weeks and complex studies, including loans above $10 million or limited comparable data, at $10,500 to $14,500 over seven to nine weeks; it lists value-added food processing among the assets that need primary research. A rush engagement of three to four weeks carries a 20% to 35% premium, the data request arrives within 48 hours, and a 50% deposit is typical.

    To start, describe the product, site, customers and target loan in the free consultation form below; a reply comes within 24 hours.

    Last updated 2026-11-08

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    Does USDA require a feasibility study for a food or beverage processing project in Iowa?

    Yes for a start-up processor with a guaranteed loan over $1,000,000; that is the case 7 CFR 5001.306(a)(3)(i) makes compulsory, with the Agency deciding the study's contents. Most new Iowa plants are well above that size. Smaller loans, such as one near the Iowa SBA average of $524,514, fall under 5001.306(a)(3)(ii), where the Agency decides, and any lender must assess feasibility under 5001.202.

    What does 7 CFR Part 5001 require the study to contain?

    Scope comes from the Agency; the site organizes food plant studies under market, technical, financial, management and economic feasibility. For an Iowa food plant that means customers and offtake, input supply by radius, process and food safety design, utilities and wastewater, a throughput-based projection with commodity and coverage tests, management depth and the plant's effect on rural jobs. Appendix A, which lists the components, appears in the CFR as an image.

    How is a food or beverage processing project evaluated in a USDA feasibility study?

    Contracted and expected sales set volume; yields and input costs set gross margin; labor at Iowa food plant pay ($76,247 on average), utilities and overhead are deducted; the result is tested against debt service. The $6,000,000 example needs $821,576.59 for 1.25x coverage. Reviewers also test customer concentration, commodity swings and whether contracts meet the 5001.105(d)(2) equity test.

    How long does a USDA feasibility study take in Iowa?

    Plan on six to seven weeks for a standard Iowa food processing study and seven to nine for complex projects, such as loans above $10 million or products with little comparable data. Paying the rush premium can bring a food plant study in within three to four weeks. Customer interviews and confirming input supply usually set the pace, so contracts and letters of intent should be ready when the engagement starts.

    How does the FY2026 85 percent guarantee affect food or beverage processing projects under $5 million?

    In fiscal 2026 a food plant's B&I guarantee is 85% below $5 million and 80% from $5 million up to $25 million. On the $525,000 example that means $446,250.00 guaranteed and a $13,387.50 fee; on the $6,000,000 example, 80% or $4,800,000.00 for $144,000.00. Meat, poultry and seafood plants can compare SPUR's 90% guarantee, per the hub.

    Who prepares a food or beverage processing feasibility study in Iowa?

    An independent, qualified consultant acceptable to the Agency, with no ownership in the processor, no equipment or site sales role and no success fee. Iowa residency is not required. The consultant should read offtake contracts, model yields and commodity inputs, document wastewater and utility capacity, and handle Iowa-specific questions such as avian influenza supply risk and the SPUR, B&I and Food Supply Chain history.

    What does a food processing feasibility study consultant cost in Iowa?

    Expect $6,900 to $12,500 for a standard B&I food plant study and $10,500 to $14,500 for a complex one on the site's schedule; because value-added food processing often requires primary research, Iowa specialty plants tend toward the upper end. Fees are fixed in a written proposal before signing, commonly with half due up front and half at draft. Accelerated delivery is priced 20% to 35% higher. Engineering, appraisal and environmental reports are priced separately.

    How long does an Iowa food processing feasibility study stay current?

    There is no expiry date in Part 5001; the test is whether the data still describe the market. The site works to data under about 18 months old for USDA and 12 months for SBA, and 5001.203 limits a supporting appraisal to one year. A lost customer, a new contract or a sharp move in input prices should prompt an update before the file goes to the state office.

    Can the same food processing study serve an SBA lender and a USDA lender?

    Yes, provided it meets Part 5001 and is addressed to both lenders. SBA can require a feasibility study under 13 CFR 120.160(b) and reads chiefly the market, financial and management sections. A Part 5001 study adds the technical, input-supply and economic chapters USDA expects, so commissioning to that standard keeps an Iowa processor free to move between 7(a), 504, B&I and SPUR.

    Why did Iowa's SBA food manufacturing loans fail more often than the national average?

    The pack shows 4 of 34 Iowa loans from FY2010 to FY2016 charged off (11.8% against 7.4% nationally), and the computed dollar share was 25.5%, so larger loans failed. The data do not say why. The usual causes in small food plants are customer loss, input cost swings and slow ramp-up, which is why an Iowa study tests each of them.

    Can an Iowa egg or poultry processor use SPUR instead of B&I?

    The hub says yes: SPUR guarantees 90% of loans for meat, poultry and seafood processing, places no rural-area restriction on the facility and treats egg processors as eligible, at a 3% fee and 0.55% retention with the lender holding at least 10%. A bakery, dairy or crop processor does not qualify. Given Iowa's avian influenza record, any SPUR study should include a flock-loss and downtime case.

    Other project types in Iowa

    Sources

    1. U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files: https://www.census.gov/programs-surveys/cbp.html
    2. U.S. Census Bureau, Vintage 2025 county population estimates: https://www.census.gov/programs-surveys/popest.html
    3. Office of Management and Budget, metropolitan statistical area delineation, July 2023 (Census delineation files): https://www.census.gov/geographies/reference-files/time-series/demo/metro-micro/delineation-files.html
    4. U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: https://data.sba.gov/dataset/7-a-504-foia
    5. 7 CFR Part 5001, OneRD Guaranteed Loanmaking and Servicing, CFR 2026 edition (govinfo): https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml
    6. 91 FR 11272, OneRD guarantee fee, retention fee and guarantee percentage notice for FY2026 (govinfo): https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm
    7. 90 FR 57351, OneRD guaranteed loan regulation technical amendments, December 11, 2025 (govinfo): https://www.govinfo.gov/content/pkg/FR-2025-12-11/html/2025-22567.htm
    8. 89 FR 79698, OneRD guarantee loan final rule, September 30, 2024 (govinfo): https://www.govinfo.gov/content/pkg/FR-2024-09-30/html/2024-21920.htm
    9. 13 CFR Part 120, SBA business loans (CFR 2026 edition): https://www.ecfr.gov/current/title-13/chapter-I/part-120
    10. USAspending.gov award counts and grant totals, Assistance Listings 10.768, 10.766 and 10.868, place of performance Iowa, FY2024 to FY2026: https://www.usaspending.gov/search
    11. Iowa hub sources reused here (USDA releases on Nutriom/Crystal Freeze Dry and Jordan's Meat Market; Business Wire 2020 on Eagle's Catch; SPUR notice FR Doc. 2026-21858; USDA APHIS avian influenza detections 2024 to 2025; Iowa Department of Agriculture and Land Stewardship on Choose Iowa grants; REAP final rule 91 FR 62600; U.S. Census Bureau 2020 Census): /iowa
    12. USDA Feasibility Study Consultants, cost and timeline schedule: /usda-feasibility-study-cost

    Data current as of November 2026.

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours