USDA Feasibility Study for General and Advanced Manufacturing in Minnesota

    NAICS 31-33

    Minnesota is a manufacturing state well beyond the Twin Cities. Census counted 6,718 manufacturing establishments in 2023, 116.8 per 100,000 residents against 84.5 nationally, and 1,797 of them are in non-metro counties, a larger share of plants (26.8%) than of people (21.9%). Average pay of $73,506 is level with the national figure, so a rural plant in Minnesota competes for skilled labour at national wages. For a USDA Business and Industry (B&I) guarantee, the feasibility study has to show that the plant's customers, costs and workforce support the loan, and that the projections hold if a major customer or a commodity cycle turns.

    Data current as of November 2026.

    When a manufacturing study is required, and which program fits

    The compulsory case is set by 7 CFR 5001.306(a)(3)(i): a B&I loan of more than $1,000,000 to a new business needs a feasibility study from an independent consultant acceptable to the Agency, with the Agency defining the scope. Expansions by an operating manufacturer, and new-company loans of $1,000,000 or less, are under 5001.306(a)(3)(ii), where USDA may require one if the application leaves questions open. Manufacturing adds a rule that most asset classes never meet: a guaranteed loan above $1,000,000 that is expected to create more than 50 jobs needs Department of Labor concurrence (5001.306(a)(1)). At the state's average of 48.4 employees per plant, a new plant at average size is close to that line.

    Plant construction, expansion, equipment and working capital on an eligible site are all B&I uses; in FY2026 the program guarantees 85% of loans under $5 million and 80% of larger ones up to $25 million. SBA 7(a) and 504 carried 3,208 Minnesota manufacturing loans from FY2010 to FY2026, so lenders know them well; 504 is strongest for owner-occupied buildings and long-lived equipment. Community Facilities does not finance private plants, and a conventional loan is the benchmark the study compares. REAP grants can pay for efficiency upgrades at an operating plant once it has 12 months of data, capped at 25% of cost and $250,000 for efficiency under the rule effective 16 October 2026. The hub also points to Minnesota's statewide Commercial PACE program for energy work and to Iron Range Resources and Rehabilitation grants and loans that can sit beside a guaranteed loan in the taconite region.

    Borrower screens are straightforward but checked. Owners of more than 20% and anyone in control must be clear of delinquent federal taxes and debt, unpaid federal judgments and debarment (5001.127(a)); a manufacturer leasing space or machines for gambling, or making illegal products, is ineligible under 5001.127(b) and (d).

    Manufacturing in Minnesota: market evidence

    Minnesota: manufacturing establishments (all), supply and rural footprint

    MeasureMinnesotaUnited States
    Establishments, 2019 → 20237,030 → 6,718 (-4.4%)287,626 → 284,452
    Per 100,000 residents (2023)116.884.5
    Average employees per establishment48.443.4
    Average annual pay per employee$73,506$73,202
    Share of establishments in non-metro counties26.8% (1,797 in 56 counties)
    Share of state population in non-metro counties (2025)21.9%

    Non-metro counties with the most manufacturing establishments (all) (2023): Crow Wing County (111); Winona County (100); Goodhue County (93); Douglas County (88); Otter Tail County (83); Rice County (79).

    Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.

    The density figure is the headline: Minnesota has 38% more manufacturing establishments per resident than the country. But the count is shrinking faster than the national one, down 312 plants or 4.4% between 2019 and 2023 against 1.1% nationally, so a reviewer will ask whether a new plant fills a gap or enters a contracting sector. The answer usually lies in the customer list, not the state total.

    The size and pay benchmarks are useful directly. The average plant employs 48.4 people and pays $73,506 a worker, about the national average; total payroll averages $3,559,511 a plant across 325,317 manufacturing jobs. A projection for a rural plant that pays well below that rate needs local wage evidence, and one that hires 50 people in a small labour shed needs commuting and training evidence, especially where the hub describes mining employment falling from more than 12,000 in the 1980s to fewer than 4,000 in 2023 and further idling in 2025 and 2026.

    A reviewer will challenge customer concentration first (purchase orders and contracts, not letters of interest), then the cost of materials and energy, the ramp to full output, and the plant's ability to staff a second shift.

    Rural footprint and B&I eligibility in Minnesota

    Rural Minnesota is more industrial than urban Minnesota. Placed by county, there are 140.8 plants for every 100,000 non-metro residents against 107.9 in metro counties (computed). The leading non-metro counties are Crow Wing (111), Winona (100), Goodhue (93), Douglas (88), Otter Tail (83) and Rice (79), and 56 non-metro counties have at least three plants.

    The B&I test is applied to the plant site under 7 CFR 5001.3: no part of a city that counted more than 50,000 residents in 2020, or of the urbanized area wrapped around it, qualifies, and the site must qualify before approval, not after. Industrial parks often sit on city edges, which is where the test bites: St. Cloud (72,647), Rochester (124,292) and Duluth (88,330) are excluded with their urbanized areas, and the hub lists Hermantown and Proctor next to Duluth as presumptively excluded. Plants in Mankato–North Mankato, Willmar, Brainerd–Baxter or Bemidji screen as eligible; the hub's Minnesota USDA page also lists the Twin Cities edge towns that need a map check. Projects in areas of long-term population decline may qualify for the reduced guarantee fee.

    Financing benchmarks: USDA B&I next to SBA

    Minnesota: SBA lending to manufacturing establishments (all)

    Period7(a) loans7(a) dollars504 loans504 dollars
    FY2010 to FY20161,226$589.2 million292$185.0 million
    FY2017 to FY2019448$197.9 million105$103.8 million
    FY2020 to FY2023610$396.0 million175$163.3 million
    FY2024 to FY2026302$187.7 million50$49.6 million

    Average 7(a) loan, FY2020 to FY2026: $640,070. Average 504 loan: $946,293. Of the 1,226 7(a) loans approved in FY2010 to FY2016 for Minnesota manufacturing establishments (all), 5.5% were charged off (national: 6.4% of 27,078), on average 61 months after approval.

    Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).

    TermB&I rule (FY2026)For a Minnesota plant
    Guarantee85% under $5 million; 80% from $5 million to $25 million (91 FR 11272)Large plants may cross into the 80% tier
    Fees3.0% of the guaranteed amount; 0.55% annual retention; reduced fee 1.0% and 0.50% at 80% where 5001.454(d) criteria are metReduced fee relevant in declining Iron Range communities if they qualify
    Maximum$25 million; up to $40 million for rural value-added cooperatives (5001.406(c))Producer-owned processing plants
    TermUseful life up to 40 years; no balloon (5001.402)Building long, machinery to its life
    Equity, existing manufacturer10% balance sheet equity, 10% of project cost, or contributed-capital test (5001.105(d)(1))Expansions
    Equity, new company with qualifying contracts10% balance sheet equity or 10% of project cost where sales contracts cover debt service for the loan term (5001.105(d)(2))Contract manufacturers with offtake
    Equity, other new company20% balance sheet equity or 25% of cost; 25% if the guarantee issues before completion (5001.105(d)(3), (4))Start-ups without contracts
    JobsDepartment of Labor concurrence above $1,000,000 and 50 jobs (5001.306(a)(1))Plan it into the timeline

    Minnesota's SBA record is deep and steady. Of 1,226 7(a) manufacturing loans approved in FY2010 to FY2016, 5.5% were charged off against 6.4% nationally, typically about five years after approval. Average sizes are moderate: $640,070 for 7(a) and $946,293 for 504 in FY2020 to FY2026, and the 504 average reached $991,740 in FY2024 to FY2026 (computed). Those figures say that most Minnesota manufacturing credit is equipment and modest buildings, and that a B&I plant loan of several million dollars sits above the typical SBA deal, which is where the B&I term and guarantee level matter most.

    Worked example (illustrative)

    Inputs. The first loan, $640,000, rounds the $640,070 average Minnesota 7(a) manufacturing loan for FY2020 to FY2026 and runs 15 years; the second, an illustrative $2,500,000 over 20 years, is sized to sit above the $1,000,000 study trigger. Both use an assumed 7.0% fixed rate with monthly payments (not a quote; within 5001.401 and 5001.402). The retention fee is shown on full principal as an upper bound. The customer-loss case assumes the largest customer supplies 30% of NOI. For the equity rows, the guaranteed loan is assumed to be the company's only debt.

    Computed: B&I terms for a Minnesota equipment loan and plant loan (Python, exact to the cent)

    LineEquipment-scale loan (7(a) average)Plant-scale loan (illustrative)
    Loan amount$640,000.00$2,500,000.00
    Rate and term (illustrative)7.0%, 15 years7.0%, 20 years
    Guaranteed amount (85%)$544,000.00$2,125,000.00
    Upfront fee (3.0%)$16,320.00$63,750.00
    First retention fee on full principal (upper bound)$2,992.00$11,687.50
    Annual debt service$69,030.01$232,589.68
    NOI for 1.25x$86,287.51$290,737.10
    Cushion above 1.00x in production jobs at $73,5060.230.79
    Coverage at a rate 2 points higher1.11x1.08x
    Coverage if the largest customer's volume (assumed 30% of NOI) is lost0.88x0.88x
    Existing manufacturer: 10% of project cost$71,111.11 on $711,111.11$277,777.78 on $2,777,777.78
    New company with purchase contracts covering debt service: 10%$71,111.11 on $711,111.11$277,777.78 on $2,777,777.78
    Other new company: 25% of project cost$213,333.33 on $853,333.33$833,333.33 on $3,333,333.33

    The plant-scale loan needs $290,737.10 of operating income for 1.25x, and the cushion above break-even is worth less than one production job at the state's average pay. Losing a customer that supplies 30% of NOI takes either loan to 0.88x, which is why reviewers ask for the customer list. The equity rules make the biggest difference: a new company with sales contracts that cover debt service for the loan term invests $277,777.78 on the $2,500,000 loan, while a start-up without contracts must find $833,333.33. Turning letters of intent into contracts is often the cheapest equity a sponsor can raise.

    Minnesota risks a manufacturing study must carry

    • Iron Range cycles. The hub reports Cleveland-Cliffs idling Minorca and partially idling Hibbing Taconite in March 2025, affecting 630 employees, and 45 more layoffs in February 2026. Supplier plants tied to taconite and steel need demand scenarios beyond one customer's plans.
    • Labour. At $73,506 average pay and 48.4 employees per plant, rural plants compete with established employers; the study should show the wage, the commute shed and training costs.
    • Energy and materials. Cost lines for electricity, gas and inputs should be sourced and stressed; Commercial PACE and REAP can reduce energy cost but do not fund the plant build.
    • Job count. Above $1,000,000 and 50 jobs, Labor Department concurrence adds a step.
    • Lender roster. The hub reports ten lenders removed from the OneRD guaranteed program on 12 May 2026; confirm the originating lender's standing.

    What a lender-grade manufacturing feasibility study in Minnesota must prove

    1. The plant site is eligible under 5001.3, with a dated USDA map determination.
    2. Customers and contracts: names, volumes, terms and concentration, with contracts that can support the 5001.105(d)(2) equity path.
    3. Product demand and pricing, with competitors and the plant's cost position.
    4. A production ramp tied to equipment delivery, commissioning and hiring.
    5. Labour supply and wages against the $73,506 state average, by shift.
    6. Capital budget and schedule, confirmed independently if the guarantee issues before completion (5001.205(e)(2)).
    7. Working capital for inventory and receivables through start-up, with quarterly cash flow.
    8. Coverage at 1.25x with stress cases for customer loss, input prices and rates, and a management team with plant experience.

    Hiring a USDA manufacturing feasibility study consultant in Minnesota

    If the borrower is a new company and the B&I loan exceeds $1,000,000, the study is required and USDA sets its scope; otherwise it is requested case by case, often when projections depart from history. The USDA feasibility study consultant must be independent of the sponsor, the equipment vendors, the builder and the lender, and acceptable to the Agency as qualified.

    A plant study under the site's cost page covers the five Part 5001 components and puts the weight on customers, production ramp and cost position; the Excel model and its sensitivity runs are delivered with the report, and revisions continue free until USDA or the lender accepts. Engineering, environmental assessments and construction cost estimating beyond benchmarks are separate. A single-site plant loan between $1 million and $10 million fits the standard B&I band ($6,900 to $12,500, six to seven weeks); loans above $10 million or phased, multi-site plants fit the complex band ($10,500 to $14,500, seven to nine weeks). Before the first call, gather customer contracts or purchase orders, the equipment list and quotes, the building plan and budget, three years of statements for an operating company and the lender's term sheet, then request a proposal; the contact page promises an answer within one business day.

    Program example

    The Minnesota hub's precedent file lists no general manufacturing B&I loan; its manufacturing-related entries are food processing guarantees, covered on the food and meat pages. The site's manufacturing case study (Alabama) is linked below as an out-of-state analysis, not a Minnesota project.

    Last updated 2026-11-08

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    Is a USDA feasibility study required for a manufacturing plant in Minnesota?

    Yes, whenever a company formed for the project asks B&I to guarantee more than $1,000,000 (7 CFR 5001.306(a)(3)(i)). Minnesota's average manufacturing 7(a) loan was $640,070 in FY2020 to FY2026, so equipment loans usually fall below the line, but new plants rarely do. For expansions the Agency and lender decide, and a loan over $1,000,000 creating more than 50 jobs also needs Labor Department concurrence.

    What does a manufacturing feasibility study consultant cost for a Minnesota plant?

    The site's cost page puts a standard single-site B&I study for a loan of $1 million to $10 million at $6,900 to $12,500, and complex work at $10,500 to $14,500 (loans over $10 million, phased or multi-site plants, thin comparables). The quote is fixed in writing before work starts. Plant engineering, environmental assessments and appraisals are separate.

    How long does a Minnesota manufacturing study take?

    On the cost page's schedule, six to seven weeks for a standard plant study and seven to nine weeks for a complex one. Customer interviews and the production ramp take most of the time. If a lender or grant deadline is close, a three to four week rush costs 20% to 35% more.

    Who can prepare a manufacturing study for B&I?

    A qualified consultant the Agency accepts, independent of the sponsor, the equipment suppliers, the contractor and the lender. Engineers and vendors provide technical inputs, but the market, financial and management conclusions must come from someone with no stake in the outcome. For a Minnesota plant the preparer should also be able to judge customer contracts, a production ramp and wage evidence in a rural labour shed.

    How long does a Minnesota plant study stay valid?

    Part 5001 attaches no expiry to a plant study, yet a reviewer will discount market evidence more than about 18 months old (site cost page) and will not close on an appraisal past its first anniversary (5001.203). A change in a key customer contract or in input prices can outdate a plant study sooner.

    Can one Minnesota plant study support SBA 504 and B&I?

    Yes. A plant study that satisfies USDA's five components leaves nothing for SBA to add under 13 CFR 120.160(b). With 1,137 Minnesota manufacturing SBA loans in FY2020 to FY2026, lenders often compare a 504 structure with a B&I guarantee, and a single study saves the sponsor a second engagement. It should show both structures, because 504's borrower contribution and B&I's equity tests produce different cash needs.

    Do Iron Range supplier plants face extra scrutiny?

    They should expect it. The hub describes Minorca's idling and Hibbing Taconite's partial idling in March 2025, affecting 630 employees, and 45 more layoffs in February 2026. A study for a plant that sells to mining or steel should show customer diversification or contracts long enough to carry the loan, and may also be able to show Iron Range Resources and Rehabilitation support alongside the guarantee.

    Are there more manufacturers in rural Minnesota than in the metros?

    Per resident, yes. Placed by county, Minnesota has 140.8 manufacturing establishments per 100,000 non-metro residents against 107.9 in metro counties, and 26.8% of placed plants are non-metro against 21.9% of the population. Crow Wing, Winona and Goodhue Counties lead with 111, 100 and 93 plants. That depth helps a study find local wage and supplier evidence, but it also means a new plant competes for workers with established employers nearby.

    Sources

    1. U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files: https://www2.census.gov/programs-surveys/cbp/datasets/
    2. U.S. Census Bureau, Vintage 2025 population estimates (state, county and incorporated places): https://www2.census.gov/programs-surveys/popest/datasets/2020-2025/
    3. Office of Management and Budget, metropolitan and micropolitan delineation, July 2023: https://www2.census.gov/programs-surveys/metro-micro/geographies/reference-files/2023/delineation-files/list1_2023.xlsx
    4. U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: https://data.sba.gov/dataset/7-a-504-foia
    5. 7 CFR Part 5001, OneRD Guaranteed Loanmaking and Servicing, CFR 2026 edition (govinfo): https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml
    6. 91 FR 11272, OneRD annual notice of guarantee fee, retention fee and guarantee percentage for FY2026 (govinfo): https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm
    7. 89 FR 79698, OneRD Guarantee Loan final rule, 30 Sep 2024 (govinfo): https://www.govinfo.gov/content/pkg/FR-2024-09-30/html/2024-21920.htm
    8. 13 CFR Part 120, SBA business loan programs (CFR 2026 edition): https://www.ecfr.gov/current/title-13/chapter-I/part-120
    9. USDA RBCS, Rural Energy for America Program final rule with comment period, 91 FR 62600 (1 Oct 2026): https://www.govinfo.gov/content/pkg/FR-2026-10-01/html/2026-20178.htm
    10. USDA Feasibility Study Consultants, Minnesota state page (state office, eligibility screens, sectors and precedents as the site reports them): https://usda-feasibility-study.com/minnesota
    11. USDA Feasibility Study Consultants, OneRD lender revocations of May 2026: https://usda-feasibility-study.com/blog/usda-lender-revocations-may-2026
    12. USDA Feasibility Study Consultants, cost and timeline page (fee bands, phases, inclusions, exclusions, rush terms): https://usda-feasibility-study.com/usda-feasibility-study-cost
    13. USDA Feasibility Study Consultants, contact page (response time): https://usda-feasibility-study.com/contact

    Data current as of November 2026.

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours