USDA Feasibility Study for Sawmills and Wood Products in Minnesota

    NAICS 321

    Minnesota's wood industry is shrinking in plant count and growing in payroll. Census counted 315 wood product manufacturers in 2023, 35 fewer than in 2019, yet employment rose 6.5% to 14,612 and payroll 40.2% to just over $1.03 billion (computed). The average plant now employs 46.4 people and pays $70,736 a worker, 23.2% above the national average. Sawmills proper are a small and declining part of that total: 27 establishments in 2023, down from 32, employing 278 people. For a sponsor seeking a USDA Business and Industry (B&I) guarantee for a mill, a kiln or a value-added wood plant in the northern forest, the feasibility study has to show a secure log or lumber supply, a market for the product mix, and a cost structure that survives a lumber price cycle.

    Data current as of November 2026.

    Study rule and program fit for wood products

    The study becomes mandatory for a newly formed wood business whose B&I loan exceeds $1,000,000; the preparer must be independent and accepted by USDA, which sets the scope (7 CFR 5001.306(a)(3)(i)). A modernisation loan to an operating mill near the state's 7(a) average of $831,811 is discretionary under 5001.306(a)(3)(ii), though lenders often ask because commodity prices drive repayment. Labor Department concurrence is added for loans above $1,000,000 creating more than 50 jobs (5001.306(a)(1)), a real possibility given the 46.4-employee average.

    B&I finances mill construction, modernisation, equipment and working capital on eligible sites, which the hub names as an established Minnesota use; FY2026 guarantees are 85% under $5 million and 80% to $25 million. SBA 7(a) and 504 have carried 142 Minnesota wood products loans since FY2010. Community Facilities does not lend to private mills, and a conventional loan is the comparison the study should run. The hub also points to REAP for kilns and mill energy systems; under the rule effective 16 October 2026 the grant follows 12 months of operating data and is capped at 25% of cost ($500,000 for renewable systems, $250,000 for efficiency), so a biomass boiler or kiln upgrade is funded after it runs, not before. Mills in areas of long-term population decline may qualify for the reduced B&I fee.

    Every owner above 20% and anyone in control must pass the 5001.127(a) screen: no delinquent federal tax or debt, no unpaid federal court judgment, no debarment.

    Wood products in Minnesota: market evidence

    Minnesota: wood product manufacturing, supply and rural footprint

    MeasureMinnesotaUnited States
    Establishments, 2019 → 2023350 → 315 (-10.0%)14,223 → 13,899
    Per 100,000 residents (2023)5.54.1
    Average employees per establishment46.431.1
    Average annual pay per employee$70,736$57,420
    Share of establishments in non-metro counties33.8% (92 in 21 counties)
    Share of state population in non-metro counties (2025)21.9%

    Non-metro counties with the most wood product manufacturing (2023): Crow Wing County (10); Cass County (8); Beltrami County (7); Goodhue County (7); Hubbard County (6); Aitkin County (5).

    Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.

    Computed: Minnesota wood products, all plants and sawmills, 2019 and 2023 (Census CBP state files)

    Type (NAICS)Establishments 2019 → 2023Employees 2019 → 2023Average pay 2023
    All wood product manufacturing (321)350 → 31513,723 → 14,612$70,736
    Sawmills (321113)32 → 27442 → 278$62,975

    The pattern is consolidation. Outside sawmills, wood product plants fell from 318 to 288 while their employment rose from 13,281 to 14,334 (computed), so the remaining plants are larger and busier. Sawmills moved the other way, losing five establishments and more than a third of their jobs; 16 of the 27 employ fewer than five people. Density of 5.5 plants per 100,000 residents against 4.1 nationally confirms Minnesota as a wood state, but a new sawmill would join the weakest segment of it.

    The benchmarks are demanding. Average payroll per plant is $3,281,244, and pay of $70,736 means rural mills compete for workers with mining and other manufacturing. A sawmill paying the sawmill average of $62,975 still has to show where its crew comes from.

    A reviewer will press on timber or log supply (stumpage access, contracts, haul distances), product prices across a cycle, recovery rates and residue markets, and whether the plant's energy and drying costs are realistic.

    Rural footprint and B&I eligibility in Minnesota

    Wood plants are concentrated in the north-central lakes and forest counties: Crow Wing (10), Cass (8), Beltrami (7), Goodhue (7), Hubbard (6) and Aitkin (5) lead the non-metro list, and 33.8% of the 272 county-placed plants are non-metro, 7.2 per 100,000 non-metro residents against 4.0 in metro counties (computed). The hub names Bemidji, Grand Rapids and International Falls as the forest centres. Another 43 plants are not placed by county.

    The site test in 7 CFR 5001.3 excludes only cities that counted more than 50,000 people in 2020 and their attached urbanized areas, and it must be met at approval. Northern mill towns are well under that size, and the hub screens Bemidji and Brainerd–Baxter as eligible. The exceptions are Duluth and its urbanized area (Hermantown and Proctor presumptively excluded) and St. Cloud. The Minnesota USDA page has the full list.

    Financing benchmarks: USDA B&I next to SBA

    Minnesota: SBA lending to wood product manufacturing

    Period7(a) loans7(a) dollars504 loans504 dollars
    FY2010 to FY201652$19.6 million15$7.1 million
    FY2017 to FY201922$10.2 million0$0
    FY2020 to FY202329$20.9 million11$6.6 million
    FY2024 to FY20269$10.7 million4$4.0 million

    Average 7(a) loan, FY2020 to FY2026: $831,811. Average 504 loan: $706,600. Of the 52 7(a) loans approved in FY2010 to FY2016 for Minnesota wood product manufacturing, 5.8% were charged off (national: 7.1% of 1,015), on average 54 months after approval.

    Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).

    TermB&I rule (FY2026)For a Minnesota mill or wood plant
    Guarantee and fees85% under $5 million, 80% to $25 million; 3.0% upfront; 0.55% retention (91 FR 11272)Reduced fee 1.0% and 0.50% at 80% where 5001.454(d) applies
    TermUseful life up to 40 years; no balloon (5001.402)Saw lines and kilns shorter than buildings
    Equity, existing mill10% balance sheet equity, 10% of cost or contributed-capital test (5001.105(d)(1))Modernisation
    Equity, new mill20% balance sheet equity or 25% of cost; 25% with a pre-completion guarantee (5001.105(d)(3), (4)); 10% with sales contracts covering debt service (5001.105(d)(2))Offtake contracts lower equity
    CollateralAppraisal; going-concern value deducted (5001.203)Used mill equipment discounts heavily
    Seasonal cash flowQuarterly for seasonal borrowers (5001.202)Winter logging and spring road limits shape inventory

    Minnesota wood products loans have grown. The 7(a) average was $721,676 in FY2020 to FY2023 and $1,186,689 in FY2024 to FY2026 (computed), and 504 averaged $706,600 across FY2020 to FY2026. Losses are moderate: 5.8% of the 52 FY2010 to FY2016 7(a) loans were charged off against 7.1% nationally, on average 54 months after approval. Recent loans of more than $1 million put new mills above the study trigger and make the B&I term and guarantee level more relevant.

    Worked example (illustrative)

    Inputs. The loan is $830,000, the state's FY2020 to FY2026 7(a) average for wood products ($831,811) rounded. The rate is an assumed 7.25% fixed over 15 years with monthly payments, reflecting an equipment-weighted loan; the rate is assumed and the term respects 5001.402. Retention is shown on full principal and after 12 payments. The lumber-price case assumes a 35% fall in NOI. The last line applies the reduced-fee terms from the FY2026 notice.

    Computed: B&I terms on a Minnesota wood products loan (Python, exact to the cent)

    LineAmount
    Loan (state FY2020 to FY2026 7(a) average $831,811, rounded)$830,000.00
    Rate and term (illustrative)7.25%, 15 years (equipment-weighted)
    Guaranteed amount at 85%$705,500.00
    Upfront fee at 3.0%$21,165.00
    Retention fee on full principal (upper bound) / after 12 payments$3,880.25 / $3,731.64
    Annual debt service$90,921.14
    NOI for 1.25x$113,651.43
    Cushion above 1.00x in mill wages at $70,7360.32 positions
    Debt service as a share of the average Minnesota wood-products payroll ($3,281,244)2.8%
    Coverage at a rate 2 points higher1.11x
    Coverage if lumber prices cut NOI by 35%0.81x
    Existing mill modernising: 10% of project cost$92,222.22 on $922,222.22
    New mill: 25% of project cost / 20% balance sheet equity$276,666.67 / $207,500.00
    Reduced-fee path if 5001.454(d) criteria are met: guaranteed (80%) / fee (1.0%) / retention after 12 payments (0.50%)$664,000.00 / $6,640.00 / $3,192.85

    The plant needs $113,651.43 of net operating income for 1.25x, which is small against the average payroll, but a 35% fall in NOI, well within a lumber cycle, takes coverage to 0.81x. That is why a reviewer wants the study to show the plant's results at the bottom of a price cycle and the working capital to carry log inventory through it. If the project qualifies for the reduced fee, the upfront cost falls from $21,165.00 to $6,640.00, in exchange for a five-point lower guarantee.

    Minnesota risks a wood products study must carry

    • Log supply. Public and private stumpage, contract terms, haul distance and competition from existing mills.
    • Price cycles. Lumber and product prices swing widely; stress cases should use a full cycle, not the latest year.
    • Seasonality. Winter harvest and spring road restrictions force log inventory; quarterly cash flow and working capital must show how it is financed.
    • Labour. Pay of $70,736 across wood products makes crews expensive and scarce in small towns.
    • Residues and energy. Sawdust, chips and bark need markets or on-site use; kilns and boilers drive energy cost and are candidates for REAP only after a year of data.

    What a lender-grade sawmill or wood products feasibility study in Minnesota must prove

    1. The site passes 7 CFR 5001.3 with a dated determination.
    2. Log or fibre supply within haul distance, with contracts and prices.
    3. Product mix, customers and prices through a cycle, with any offtake contracts.
    4. Recovery rates, capacity and staffing tied to the equipment specification.
    5. Energy, drying and residue handling costs, with residue revenue evidenced.
    6. Working capital for seasonal log inventory, shown quarterly.
    7. Capital budget and schedule, independently confirmed if the guarantee issues before completion.
    8. Coverage of 1.25x with stress cases for product prices, log costs and rates, and management with mill experience.

    Hiring a USDA sawmill feasibility study consultant in Minnesota

    The study is compulsory for a new company borrowing over $1,000,000 under B&I and discretionary otherwise. The USDA feasibility study consultant chosen must have no stake in the mill, its equipment, its timber supply or the lender, and be able to work with commodity price series and log supply evidence as well as debt service.

    The cost page's scope for a mill puts the five Part 5001 components to work on log supply, product prices and recovery, with an Excel model that runs a full lumber cycle and revisions at no charge until acceptance. A single-site mill with a loan of $1 million to $10 million fits the standard B&I band ($6,900 to $12,500, six to seven weeks); phased or unusual plants, or thin comparables, fit the complex band ($10,500 to $14,500, seven to nine weeks). Mill engineering and environmental reviews are priced separately. Provide the timber supply plan, equipment quotes and layout, product and customer information, the site, statements for an existing mill and the lender's terms, then request a proposal; the contact page states a senior analyst replies within one business day.

    Program example

    The Minnesota hub lists no named wood products financing. The site's sawmill case study (Pennsylvania) is linked below as an out-of-state analysis, not a Minnesota project.

    Last updated 2026-11-08

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    Do Minnesota sawmills need a feasibility study for a USDA loan?

    If the mill company is new and the B&I loan exceeds $1,000,000, the study is mandatory (7 CFR 5001.306(a)(3)(i)). Minnesota's wood products 7(a) loans averaged $1,186,689 in FY2024 to FY2026, so new mills now usually cross that line. Modernisation loans to operating mills are at the Agency's discretion, and lenders often ask because lumber prices drive repayment.

    What does a sawmill feasibility study consultant cost for a Minnesota mill?

    Mill studies are quoted from the cost page's two B&I bands: $6,900 to $12,500 when the plant is a single site with comparables, $10,500 to $14,500 when it is phased or thinly comparable. A new sawmill with limited regional comparables may fall in the complex band. The fee is fixed in a written proposal; engineering, environmental work and appraisals are separate.

    How long does a Minnesota sawmill study take?

    About a month and a half for a standard mill study and up to two months for a complex one, from the engagement letter. Assembling log supply evidence and product price series takes the longest. A three to four week rush is available at a 20% to 35% premium if analysts are free.

    Who can prepare a wood products feasibility study for B&I?

    A consultant the Agency accepts as qualified, independent of the mill, its equipment suppliers, its timber suppliers and the lender. Foresters and equipment vendors provide supply and capacity data, but the market, financial and management conclusions must be independent and grounded in contracts and price evidence. Recovery rates and residue markets should be tested, not taken from a vendor brochure.

    How long does a Minnesota sawmill study stay valid?

    No clause in Part 5001 retires a mill study, but lumber markets do: data older than about 18 months is usually refreshed (site cost page), and an appraisal cannot be more than a year old at closing (5001.203). A sharp move in lumber prices or the loss of a timber contract can date a study faster than that.

    Can one study support SBA and USDA financing for a mill?

    Yes. A mill study meeting USDA's standard gives an SBA lender everything 13 CFR 120.160(b) lets it require. With 38 7(a) and 15 504 Minnesota wood products loans in FY2020 to FY2026, lenders often compare SBA with B&I; one study can model both and save a second engagement, while showing the lender how each structure handles a weak lumber year.

    Why are Minnesota sawmills declining while wood products grow?

    Census shows sawmills falling from 32 to 27 and their employment from 442 to 278 between 2019 and 2023, while other wood product plants added more than 1,000 jobs (computed). Consolidation and value-added products appear to be where growth is. A new sawmill study must show why its product and log supply escape the trend.

    Can REAP pay for a kiln or biomass boiler at a Minnesota mill?

    Possibly, but not up front. The hub names kilns and mill energy systems among REAP uses in Minnesota. Under the rule effective 16 October 2026 the system must run for 12 months before the application, grants are capped at 25% of cost, and the REAP guaranteed loan, not the grant, is the source of up-front financing.

    Sources

    1. U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files: https://www2.census.gov/programs-surveys/cbp/datasets/
    2. U.S. Census Bureau, County Business Patterns 2019 and 2023 state files by detailed industry and employment size class (computed tables on this page): https://www2.census.gov/programs-surveys/cbp/datasets/
    3. U.S. Census Bureau, Vintage 2025 population estimates (state, county and incorporated places): https://www2.census.gov/programs-surveys/popest/datasets/2020-2025/
    4. Office of Management and Budget, metropolitan and micropolitan delineation, July 2023: https://www2.census.gov/programs-surveys/metro-micro/geographies/reference-files/2023/delineation-files/list1_2023.xlsx
    5. U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: https://data.sba.gov/dataset/7-a-504-foia
    6. 7 CFR Part 5001, OneRD Guaranteed Loanmaking and Servicing, CFR 2026 edition (govinfo): https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml
    7. 91 FR 11272, OneRD annual notice of guarantee fee, retention fee and guarantee percentage for FY2026 (govinfo): https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm
    8. 13 CFR Part 120, SBA business loan programs (CFR 2026 edition): https://www.ecfr.gov/current/title-13/chapter-I/part-120
    9. USDA RBCS, Rural Energy for America Program final rule with comment period, 91 FR 62600 (1 Oct 2026): https://www.govinfo.gov/content/pkg/FR-2026-10-01/html/2026-20178.htm
    10. USDA Feasibility Study Consultants, Minnesota state page (state office, eligibility screens, sectors and precedents as the site reports them): https://usda-feasibility-study.com/minnesota
    11. USDA Feasibility Study Consultants, cost and timeline page (fee bands, phases, inclusions, exclusions, rush terms): https://usda-feasibility-study.com/usda-feasibility-study-cost
    12. USDA Feasibility Study Consultants, contact page (response time): https://usda-feasibility-study.com/contact

    Data current as of November 2026.

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours