North Dakota has three times the national number of meat plants per resident and almost none of the national industry's scale. Census counted 26 meat and poultry processing establishments in 2023, 3.3 per 100,000 residents against 1.1 nationally, but they employ 29.3 people on average against 149.7 across the country. These are local slaughter and processing plants serving livestock producers and households, not packing houses. A sponsor building or expanding one asks a lender to finance a small, labour-intensive plant whose volume depends on producers' animals and the plant's inspection status, with a thin SBA record (no 7(a) loans since FY2019) and few comparable plants to point to. The feasibility study must turn that into evidence.
Data current as of November 2026.
Program fit and when a study is required
Meat processing suits B&I because plants are fixed, rural and long-lived; a plant loan below $5 million carries an 85 percent guarantee in FY2026, priced at 3 percent of the guaranteed share once and 0.55 percent yearly (91 FR 11272), and amortizes over the life of the building and equipment (5001.402). A producer-owned cooperative processing value-added products can borrow up to $40 million under 5001.406(c), at the Secretary's discretion. The state's two biggest recent meat loans came through SBA 504. REAP grants can pay for coolers, compressors and other efficiency work once a plant has a year of operating data, capped at a quarter of the cost since the rule of 16 October 2026.
A start-up plant company with a B&I loan over $1,000,000 has no choice: 7 CFR 5001.306(a)(3)(i) makes an independent, Agency-accepted study a condition, and USDA decides what it must cover. Expansions by an operating plant are discretionary (5001.306(a)(3)(ii)), as is SBA's request under 13 CFR 120.160(b). If the guarantee will issue before construction is finished, 5001.205(e)(2) adds an independently confirmed budget and timetable, a fixed-price contract and equity injected before any guaranteed funds.
Meat processing in North Dakota: market evidence
North Dakota: meat and poultry processing, supply and rural footprint
| Measure | North Dakota | United States |
|---|---|---|
| Establishments, 2019 → 2023 | 28 → 26 (-7.1%) | 3,501 → 3,716 |
| Per 100,000 residents (2023) | 3.3 | 1.1 |
| Average employees per establishment | 29.3 | 149.7 |
| Average annual pay per employee | $53,774 | $50,981 |
| Share of establishments in non-metro counties | 0.0% (0 in 0 counties) | |
| Share of state population in non-metro counties (2025) | 38.5% |
Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.
The plant count fell by two while employment rose from 602 to 761, a 26.4% gain, and pay rose 24.9% to $53,774, 5.5% above the national figure. Fewer plants doing more work, at higher wages, is a sign of demand pressing on existing capacity, which is the case a new or expanded plant has to make. The size split is stark: 17 of the 26 plants employ fewer than ten people. A reviewer will challenge three things: whether livestock producers will commit enough animals to fill kill and cut days year-round, whether the plant can hire and keep skilled meat cutters at North Dakota wages, and whether the plant's inspection status lets it sell where the projections assume.
North Dakota meat plants by type, 2019 and 2023 (computed from the Census CBP state files)
| Type (NAICS) | Plants 2019 → 2023 | Employees 2019 → 2023 | Average pay 2023 (North Dakota / U.S.) |
|---|---|---|---|
| Animal slaughtering, except poultry (311611) | 21 → 19 | 528 → 622 | $55,984 / $56,322 |
| Meat processed from carcasses (311612) | 7 → 7 | 74 → 139 | $43,885 / $55,670 |
| Poultry processing and rendering | none recorded | none recorded | n/a |
Size classes, 2023 (same files): 9 plants employ fewer than 5 people, 8 employ 5 to 9, 4 employ 10 to 19 and 3 employ 20 to 49; two are withheld.
Where the plants are, and why the 0.0% is misleading
The county file places only 6 of the 26 plants, three each in Morton and Ward Counties, both metro; that is the basis of the pack's 0.0% non-metro share. The other 20 are not assigned to a county. Every county row in the file for this code shows three or more plants, which suggests counties with one or two plants are not listed. If that is the reason, at least 8 of the 20 unplaced plants must be in non-metro counties, because the six metro counties not listed could hold at most two each (12 in all). The real rural share is therefore unknown but certainly well above zero, and a study should map the plants within hauling distance of its site directly.
Regional comparables (other states' figures, labelled)
| Measure | North Dakota | South Dakota | Montana | Minnesota |
|---|---|---|---|---|
| Plants, 2019 → 2023 | 28 → 26 (-7.1%) | 40 → 44 (+10.0%) | 46 → 66 (+43.5%) | 106 → 101 (-4.7%) |
| Per 100,000 residents | 3.3 | 4.8 | 5.8 | 1.8 |
| Average employees per plant | 29.3 | 146.2 | 9.9 | 176.7 |
| Average pay per employee | $53,774 | $60,868 | $37,980 | $56,517 |
| Non-metro share of county-placed plants | 0.0% (6 placed) | 50.0% | 57.1% | 55.3% |
| SBA 7(a) loans, FY2010 to FY2026 | 6 | 12 | 14 | 24 |
| Average 7(a) loan, FY2020 to FY2026 | none | $314,067 (6 loans) | $1,232,600 (7 loans) | $718,527 (15 loans) |
Source: each state's pack (Census CBP 2019 and 2023; SBA FOIA data as of 30 Sep 2026).
Montana is the regional model for small-plant growth: 20 more plants in four years, averaging 9.9 workers, with seven 7(a) loans since FY2020 averaging $1,232,600. South Dakota and Minnesota averages are dominated by large packing plants and say little about a local processor. A North Dakota study can cite Montana's growth and loan sizes as out-of-state evidence that small plants are being built and financed in the region.
National benchmarks
SBA's national meat processing record is modest but sound: 3.7% of 214 FY2010 to FY2016 7(a) loans were charged off, on average 72 months after approval. In FY2020 to FY2026 SBA approved 213 national 7(a) loans averaging $711,656 and 38 504 loans averaging $1,604,316 (computed from the pack's aggregates). North Dakota's two 504 loans in FY2020 to FY2023, $5,971,000 together, averaged $2,985,500, close to double the national 504 figure.
Evidence the study must build when local comparables are thin
- Livestock supply: head counts by species within hauling distance, and signed or committed producer bookings by month.
- Kill and processing schedule: animals per day by species, days per week, and any seasonal peaks producers or hunters create, which the study should document rather than assume.
- Sales channels and prices: custom processing fees, retail and wholesale sales, and letters from buyers, with the inspection status each channel requires.
- Competing plants within hauling distance, their capacity and waiting times for slaughter dates.
- Labour: available meat cutters and the wage needed to hire them, against the state average of $53,774.
- Waste handling, water and wastewater capacity, and the permits each needs.
Rural footprint and B&I eligibility in North Dakota
For a plant, the B&I question is the parcel's: 7 CFR 5001.3 treats as rural everything beyond places of more than 50,000 residents and the urbanized land joined to them. North Dakota excludes Fargo (136,275), Bismarck (77,963) and Grand Forks (60,365). The two counties where the file does place plants, Morton and Ward, show why the metro label misleads: Ward County's seat, Minot, has 47,308 residents and is under the line, and Morton County's rural townships lie well outside any excluded city, though Mandan (25,061) needs a contiguity check with Bismarck. Most small-town plant sites will pass on population. Plant sponsors can check a site against the place list on the North Dakota hub and the steps on the B&I eligibility check page.
For a producer-owned plant, 5001.127(a) reaches the members who matter: any owner with control or a non-passive stake above 20 percent must have no delinquent federal tax or debt, no unpaid federal court judgment and no debarment, and debt on a repayment plan counts until paid.
Financing benchmarks: USDA B&I next to SBA
North Dakota: SBA lending to meat and poultry processing
| Period | 7(a) loans | 7(a) dollars | 504 loans | 504 dollars |
|---|---|---|---|---|
| FY2010 to FY2016 | 3 | $243,000 | 0 | $0 |
| FY2017 to FY2019 | 3 | $345,000 | 1 | $253,000 |
| FY2020 to FY2023 | 0 | $0 | 2 | $6.0 million |
| FY2024 to FY2026 | 0 | $0 | 0 | $0 |
| North Dakota had fewer than 30 seasoned 7(a) loans for meat and poultry processing; nationally, 3.7% of 214 FY2010 to FY2016 loans were charged off, on average 72 months after approval. |
Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).
| Term | B&I rule (FY2026) | For a North Dakota meat plant |
|---|---|---|
| Guarantee and fees | 85% under $5 million, 80% from $5 million to $25 million; 3.0% upfront; 0.55% retention (91 FR 11272) | 0.50% more if the guarantee issues before completion |
| Maximum | $25 million; $40 million for a rural value-added cooperative (5001.406(c)) | Producer-owned plants |
| Term | Useful life up to 40 years; no balloon (5001.402) | Building long; processing equipment shorter |
| Equity, new plant with producer or buyer contracts covering debt service | 10% balance sheet equity or 10% of project cost (5001.105(d)(2)) | Contracts at least as long as the loan |
| Equity, other new plant | 20% balance sheet equity (4:1) or 25% of project cost (5001.105(d)(4)); 25% with a pre-completion guarantee (5001.105(d)(3)) | Default case |
| Equity, existing plant | 10% balance sheet equity, 10% of project cost, or contributed-capital test (5001.105(d)(1)) | Expansions |
| Collateral | Appraisal over $250,000; going-concern value deducted (5001.203) | Special-purpose building discounted |
| Seasonal cash flow | Quarterly cash flow for seasonal borrowers (5001.202) | Fall peaks are typical |
Worked example (illustrative)
Inputs. North Dakota has no meat 7(a) loans since FY2019, so the example uses two reference sizes. Loan A is $3,000,000, close to the state's FY2020 to FY2023 504 average of $2,985,500, the scale of a new or rebuilt plant. Loan B is $712,000, the national FY2020 to FY2026 7(a) average of $711,656, rounded, the scale of an expansion. Both use a 7.0% fixed rate chosen for illustration (no lender has quoted it) and 240 monthly payments, inside 5001.401 and 5001.402. Neither loan is assumed to sit beside other debt.
| Line | Loan A: near the state 504 average | Loan B: national 7(a) average |
|---|---|---|
| Loan amount | $3,000,000.00 | $712,000.00 |
| B&I guarantee, FY2026 | 85% | 85% |
| Guaranteed amount | $2,550,000.00 | $605,200.00 |
| Unguaranteed portion | $450,000.00 | $106,800.00 |
| Upfront fee (3.0% of guaranteed) | $76,500.00 | $18,156.00 |
| First-year retention fee, upper bound (0.55%) | $14,025.00 | $3,328.60 |
| Retention fee on the balance after 12 payments | $13,691.35 | $3,249.41 |
| Monthly principal and interest (7.0%, 20 years) | $23,258.97 | $5,520.13 |
| Annual debt service | $279,107.62 | $66,241.54 |
| Net operating income for 1.25x | $348,884.52 | $82,801.93 |
| Cushion above 1.00x | $69,776.90 | $16,560.39 |
| Cushion in wages at the state average ($53,774) | 1.30 positions | 0.31 positions |
| Debt service at a rate 2 points higher | $323,901.34 | $76,872.59 |
| Coverage at that rate | 1.08x | 1.08x |
| Coverage with income 10% below plan | 1.12x | 1.12x |
| New plant with qualifying contracts: 10% of project cost | $333,333.33 on $3,333,333.33 | $79,111.11 on $791,111.11 |
| Other new plant: 25% of project cost | $1,000,000.00 on $4,000,000.00 | $237,333.33 on $949,333.33 |
| Other new plant: 20% balance sheet equity | $750,000.00 | $178,000.00 |
| Study compulsory for a new business? | Yes, above $1,000,000 | No (discretionary) |
| SBA 7(a) alternative: 75% guaranteed and fee ceiling | $2,250,000.00 and $81,875.00 | $534,000.00 and $18,690.00 |
Reading the table. Loan A must produce $348,884.52 of operating income for 1.25x, and its cushion over break-even is worth about one and a third meat-cutter wages at the state average. A plant that loses a single skilled cutter can lose processing days, which is why labour is a coverage risk here and not only a cost line. Producer contracts that meet 5001.105(d)(2) would cut Loan A's new-plant equity from $1,000,000.00 to $333,333.33; a cooperative of livestock producers is the structure most likely to produce such contracts.
What a lender-grade meat processing feasibility study in North Dakota must prove
- Livestock supply within hauling distance, with producer bookings by month.
- Throughput by species per day and week, reconciled with the plant's design and staffing.
- Inspection status and the sales channels it allows, with prices for each channel.
- Competing plants and their waiting times, mapped directly given the county-file gap.
- A labour plan at current wages, recognising the 24.9% pay rise from 2019 to 2023.
- Construction budget and schedule confirmed independently if the guarantee issues before completion.
- Seasonal cash flow by quarter and working capital for carcass and product inventory.
- Coverage under lower bookings, a labour shortfall and higher costs, with the site's eligibility confirmed.
Hiring a USDA meat processing feasibility study consultant in North Dakota
For a new meat company borrowing more than $1,000,000 under B&I, an independent study is required and the Agency sets the scope; expansions are at Agency and lender discretion. The USDA feasibility study consultant chosen for a North Dakota plant should be able to work from producer interviews and booking commitments, since published local data stop at the Census count.
Meat plants with few nearby comparables or phased construction are the kind of file the site's cost and timeline page puts in its complex band, $10,500 to $14,500 and seven to nine weeks; a straightforward single-site plant sits in the $6,900 to $12,500 band and takes six to seven. Engineering and environmental assessments are outside the study's scope there. Whichever band applies, the price is set before work starts, the Excel model comes with the report, and revisions continue without charge until USDA or the lender signs off, as the engagement letter states. A first call goes best with producer commitments, a plant concept, a site and a lender in hand; book a free consultation and expect an answer within a day, as the site's form states.
National program examples (outside North Dakota)
This site's national meat processing material cites publicly announced USDA-funded meat projects as program evidence: Better For Butchery in Caldwell County, Kentucky (a $2.5 million Rural Development loan) and Cedar County Meat Market in Missouri (two B&I guarantees). Both are outside North Dakota and are reported as the site states them. The inputs contain no North Dakota meat processing precedent.
Last updated 2026-11-08
USDA Feasibility, Inc.