Food processing is one of the few South Dakota industries that is more rural than the state's population. Census counted 90 food manufacturing plants other than meat in 2023, 9.8 per 100,000 residents against 8.1 nationally, and 56.5% of those placed by county are in non-metro counties, against 48.7% of residents. They are larger than the national average, with 50.5 employees each against 42.0. That profile suits USDA B&I, which exists to finance plants in rural towns. It also sets the test a feasibility study must pass: a plant that buys farm commodities and sells processed food must prove both ends of the chain, raw-material supply on one side and signed buyers on the other.
Data current as of November 2026.
Which program fits a South Dakota food processing project
| Route | Fit in South Dakota | What to check first |
|---|---|---|
| USDA B&I guarantee | New plants, expansions, equipment and working capital outside Sioux Falls and Rapid City; up to $25 million per borrower | Rural parcel (7 CFR 5001.3); Labor Department concurrence above $1,000,000 and 50 jobs (5001.306(a)(1)) |
| SBA 504 | Owner-occupied plants; 8 South Dakota food-manufacturing loans since fiscal 2010, averaging $1.7 million in fiscal 2020 to 2026 | 10% to 20% injection by age and single-purpose status (13 CFR 120.910) |
| SBA 7(a) | Equipment and working capital for small processors; 21 South Dakota loans since fiscal 2010 | 75% guarantee above $150,000; fee ceilings (120.210, 120.220) |
| Value-Added Producer Grants | Planning and working capital for agricultural producers who add value to their own products | Producer eligibility; separate program rules (see the site's VAPG page) |
| REAP | Efficiency and renewable systems at an operating plant | Rule effective 16 October 2026 |
| Conventional | Established processors with strong balance sheets | Bank policy |
When the study is compulsory
For a new processing company, B&I requires an independent feasibility study whenever the guaranteed loan exceeds $1,000,000, with the Agency setting the scope (7 CFR 5001.306(a)(3)(i)). Most new plants cross that line. South Dakota's SBA 7(a) food loans are small, averaging $170,562 over fiscal 2020 to 2026, and represent equipment and working capital rather than plant construction. Expansions by operating processors are discretionary (5001.306(a)(3)(ii)). A plant creating more than 50 jobs on a loan over $1,000,000 also needs Department of Labor concurrence (5001.306(a)(1)); at the state average of 50.5 employees per plant, a new facility of ordinary size sits at that threshold.
Food processing in South Dakota: market evidence
South Dakota: food manufacturing (excluding meat), supply and rural footprint
| Measure | South Dakota | United States |
|---|---|---|
| Establishments, 2019 → 2023 | 84 → 90 (+7.1%) | 24,589 → 27,414 |
| Per 100,000 residents (2023) | 9.8 | 8.1 |
| Average employees per establishment | 50.5 | 42.0 |
| Average annual pay per employee | $56,818 | $58,248 |
| Share of establishments in non-metro counties | 56.5% (39 in 10 counties) | |
| Share of state population in non-metro counties (2025) | 48.7% |
Non-metro counties with the most food manufacturing (excluding meat) (2023): Brookings County (7); Grant County (5); Beadle County (4); Brown County (4); Yankton County (4); Butte County (3).
Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.
The count rose from 84 to 90 (+7.1%), slower than the national gain of 11.5%, but from a base 20% denser than the U.S. per resident. Average plant size is 50.5 employees and payroll per plant averaged $2,871,222 in 2023. Pay per employee, $56,818, is within 2.5% of the national level, so a South Dakota plant does not enjoy the wage discount seen in hotels or restaurants; its cost advantages, if any, come from raw-material proximity and land and utility costs. Reviewers will ask for both, documented with quotes rather than averages.
Food manufacturing (excluding meat) in selected South Dakota counties (CBP county file; Vintage 2025 population)
| County (largest town) | OMB status | Plants, 2023 | Residents, 2025 | Plants per 100k residents |
|---|---|---|---|---|
| Hand (Miller) | Non-metro | 3 | 3,121 | 96.1 |
| Grant (Milbank) | Non-metro | 5 | 7,534 | 66.4 |
| Spink (Redfield) | Non-metro | 3 | 6,155 | 48.7 |
| Moody (Flandreau) | Non-metro | 3 | 6,632 | 45.2 |
| Union (North Sioux City) | Metro (Sioux City area) | 5 | 17,402 | 28.7 |
| Butte (Belle Fourche) | Non-metro | 3 | 10,856 | 27.6 |
| Beadle (Huron) | Non-metro | 4 | 19,624 | 20.4 |
| Brookings (Brookings) | Non-metro | 7 | 37,635 | 18.6 |
| Minnehaha (Sioux Falls) | Metro | 18 | 212,691 | 8.5 |
Supply, demand and competition
The county table shows processing spread through small farm towns: Hand County has 3 plants for 3,121 residents and Grant County 5 for 7,534, rates seven to eleven times Minnehaha County's. Those plants sit near their raw materials, and a new one competes with them for the same crops, milk or other inputs within a hauling radius. A study should therefore map the supply catchment (the site's feedstock radius tool shows the method), quantify available volume after existing buyers, and price delivered inputs. On the sales side it must name buyers, volumes and terms, show the plant's delivered cost to them against competing suppliers, and explain how freight from South Dakota to the buyers' distribution centers affects margin.
Revenue model, costs and capital
Revenue is product volume by line times net price after freight, promotional allowances and broker fees, ramped to rated capacity. Costs are raw materials (usually the largest line and the most volatile), packaging, labour, energy, water and wastewater, maintenance, food safety and quality programs, insurance, freight and overhead. Capital items are land, building with food-grade finishes, processing and packaging lines, refrigeration where needed, utilities including wastewater pretreatment, laboratory and quality equipment, installation and commissioning, working capital for raw-material inventory, and a contingency.
Rural footprint and B&I eligibility in South Dakota
The pack places 39 of 69 county-located plants (56.5%) in 10 non-metro counties: Brookings (7), Grant (5), Beadle (4), Brown (4), Yankton (4) and Butte (3) lead. Census assigns 21 of the state's 90 plants to no county, so county counts understate the rural base.
Eligibility rests on the parcel rather than the county. Under 7 CFR 5001.3, B&I excludes places of more than 50,000 people and their contiguous urbanized areas; in South Dakota that is Sioux Falls (213,748) and Rapid City (80,589). Plants in Minnehaha County's 18-plant cluster are excluded if they sit in the Sioux Falls urban area but not if they sit in outlying towns, and Union County's metro classification does not exclude its towns unless they join an urbanized area. See the South Dakota state hub for the screen.
Financing benchmarks: USDA B&I next to SBA
South Dakota: SBA lending to food manufacturing (excluding meat)
| Period | 7(a) loans | 7(a) dollars | 504 loans | 504 dollars |
|---|---|---|---|---|
| FY2010 to FY2016 | 11 | $6.2 million | 5 | $3.8 million |
| FY2017 to FY2019 | 2 | $435,000 | 0 | $0 |
| FY2020 to FY2023 | 5 | $772,000 | 2 | $1.1 million |
| FY2024 to FY2026 | 3 | $592,500 | 1 | $4.0 million |
Average 7(a) loan, FY2020 to FY2026: $170,562. Average 504 loan: $1.7 million. South Dakota had fewer than 30 seasoned 7(a) loans for food manufacturing (excluding meat); nationally, 7.4% of 3,150 FY2010 to FY2016 loans were charged off, on average 60 months after approval.
Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).
SBA's role in South Dakota food processing is small. The fiscal 2020 to 2026 7(a) average of $170,562 is 64.8% below the national average for the sector ($484,253), and the 504 program, with three loans averaging $1.7 million, carried the real estate. None of the 11 seasoned South Dakota loans was charged off, while nationally 7.4% of 3,150 were, on average 60 months after approval. That national rate is more than double the 3.0% recorded for hotels and not far below the 9.6% for restaurants, and it explains why lenders insist on contracts and supply evidence.
B&I guaranteed loan terms for loans obligated in fiscal 2026
| Term | Rule and source |
|---|---|
| Guarantee share | 85% for loans under $5 million; 80% from $5 million to $25 million; 80% on the reduced-fee path (91 FR 11272) |
| Upfront guarantee fee | 3.0% of the guaranteed amount, or 1.0% on the reduced-fee path; plus 0.50% if the guarantee issues before construction is complete (91 FR 11272; 5001.454) |
| Annual retention fee | 0.55% (0.50% on the reduced-fee path) of the guaranteed share of principal outstanding on 31 December; the rate is fixed at obligation (5001.455) |
| Loan ceiling | $25 million per borrower (5001.406(c)) |
| Term | Useful life, at most 40 years; no balloon; first full payment within 3 years of the note if interest-only (5001.402) |
| Rate | Negotiated; fixed, variable or combined; no higher than the lender charges on similar non-guaranteed loans; variable rates reset no more than quarterly (5001.401) |
| Equity, existing business | 10% balance sheet equity (or debt to equity of 9:1), 10% of eligible project cost, or the contributed-capital test (5001.105(d)(1)) |
| Equity, new business | 20% balance sheet equity (or 4:1) or 25% of project cost; 10% with sales contracts that cover debt service; 25% (or 3:1) if the guarantee issues before construction ends (5001.105(d)(2) to (4)) |
| Collateral | Appraisal for real estate over $250,000; as-is and prospective values for construction; going-concern value deducted before discounting; appraisals no older than one year (5001.203) |
| Guarantors | Owners of 20% or more guarantee at least their share of the guaranteed amount for the full term (5001.204) |
| Feasibility study | Required from an independent qualified consultant for loans over $1,000,000 to a new business; at the Agency's discretion otherwise (5001.306(a)(3)) |
The B&I rule that matters most to a processor is the equity reduction for contracted sales: a new business whose sales contracts cover debt service for at least the loan term needs 10% equity instead of 20% to 25% (5001.105(d)(2)). If the plant wants the guarantee issued before construction ends, equity rises to 25%, a 0.50% fee is added, and 5001.205(e)(2) requires a fixed-price construction contract, an independently confirmed budget and schedule, and the owner's equity in first.
Worked example (illustrative)
South Dakota recorded only eight SBA 7(a) food-manufacturing loans in fiscal 2020 to 2026, so Loan A uses the national average instead: $485,000, rounding $484,253, modelled as an equipment loan over 10 years. Loan B, $3,500,000, is an illustrative new processing plant financed over 20 years. Both carry an illustrative 7.25% fixed rate, not a quote, within 5001.401 and 5001.402. Fiscal 2026 B&I fee rates apply, and equity rows assume no other debt.
| Line | Loan A: national SBA average for food manufacturing | Loan B: illustrative new processing plant |
|---|---|---|
| Loan amount | $485,000 | $3,500,000 |
| B&I guarantee share for fiscal 2026 loans (91 FR 11272) | 85% | 85% |
| Guaranteed amount | $412,250.00 | $2,975,000.00 |
| Unguaranteed portion held by the lender | $72,750.00 | $525,000.00 |
| Upfront guarantee fee (3.0% of the guaranteed amount) | $12,367.50 | $89,250.00 |
| First-year retention fee, upper bound (0.55% of the guaranteed share of the full balance) | $2,267.38 | $16,362.50 |
| Retention fee on the balance left after 12 monthly payments | $2,107.07 | $15,984.48 |
| Illustrative rate and amortization (not a quote) | 7.25% fixed, 10 years, monthly | 7.25% fixed, 20 years, monthly |
| Monthly principal and interest | $5,693.95 | $27,663.16 |
| Annual debt service | $68,327.41 | $331,957.91 |
| Net operating income needed for 1.25x coverage | $85,409.26 | $414,947.39 |
| Cushion above 1.00x coverage | $17,081.85 | $82,989.48 |
| Cushion in wages at the South Dakota food manufacturing average pay ($56,818) | 0.30 positions | 1.46 positions |
| Interest-only payment for a start-up year, if structured (5001.402) | $35,162.50 | $253,750.00 |
| Annual debt service if the rate is 2.00 points higher | $74,515.04 | $384,664.07 |
| Coverage at that higher rate on the same income | 1.15x | 1.08x |
| Coverage if income lands 10% below plan | 1.125x | 1.125x |
| New business: equity at 25% of project cost (5001.105(d)(4)) | $161,666.67 on a $646,666.67 project | $1,166,666.67 on a $4,666,666.67 project |
| New business: 20% balance sheet equity test (debt to equity 4:1, loan as the only debt) | $121,250.00 | $875,000.00 |
| Existing business: 10% of project cost (5001.105(d)(1)) | $53,888.89 on a $538,888.89 project | $388,888.89 on a $3,888,888.89 project |
| Reduced-fee path (1.0% fee, 0.50% retention, 80% guarantee): upfront fee | $3,880.00 | $28,000.00 |
| Independent study compulsory for a new business? (5001.306(a)(3)(i)) | No; the Agency may still require one (5001.306(a)(3)(ii)) | Yes, above $1,000,000 |
| Application track (5001.306) | Streamlined, $600,000 or less | Full 5001.306(a) processing |
| SBA 7(a) comparison: guaranteed share and guaranty fee ceiling (13 CFR 120.210, 120.220) | 75%: $363,750.00 guaranteed, fee ceiling $10,912.50 | 75%: $2,625,000.00 guaranteed, fee ceiling $95,937.50 |
What it shows. Loan B requires $414,947.39 of operating cash flow for 1.25x and, for a new company without contracts, $1,166,666.67 of equity at 25% of cost. With qualifying sales contracts the 10% test applies, which the existing-business row shows at $388,888.89 on a $3,888,888.89 project. That difference, $777,777.78, is the value of signed offtake under Part 5001. A two-point rate rise drops Loan B to 1.08x. Loan A is a streamlined loan where the Agency may, but need not, ask for a study.
What a lender-grade food processing feasibility study in South Dakota must prove
- Raw-material supply within a defined hauling radius, net of existing buyers, with delivered prices.
- Named customers with volumes, prices and contract terms, and the share of capacity committed.
- A delivered-cost comparison against competing suppliers, including freight from South Dakota.
- Process design, capacity and yield from equipment suppliers, with the ramp to rated output.
- Food safety and regulatory requirements for the product, and their capital and operating cost.
- Utilities, especially water and wastewater capacity, confirmed with providers.
- Labour availability in the commuting area at wages near the $56,818 state average.
- Construction budget, schedule and contractor, and 5001.205(e)(2) compliance if relevant.
- Sensitivity to input price, selling price, volume and interest rate.
Risks and mitigants
| Risk | Why it bites in South Dakota | How the study tests or mitigates it |
|---|---|---|
| Commodity input prices | Plants buy farm products whose prices swing | Pass-through clauses; input-price sensitivity |
| Customer concentration | Small plants sell to few buyers | Contract analysis; buyer credit |
| Wastewater | Small towns have limited treatment capacity | Utility capacity letters; pretreatment in the budget |
| Labour | Plants average 50.5 staff in small towns | Commuting-area labour study |
| National loss record | 7.4% of seasoned SBA loans charged off | Contracts, supply evidence, conservative ramp |
Process and documents
For B&I, choose a lender approved to make OneRD guaranteed loans and agree the scope; for a compulsory study the Agency itself defines it. The lender submits the study with its application to the USDA Rural Development state office serving South Dakota. Sponsors provide supply letters or contracts, customer letters or contracts, product specifications, equipment quotes, a process flow, site and utility information, the construction budget and schedule, and financial statements. Food studies are sent back for unsigned customers, supply assumed rather than shown, missing wastewater costs and ramp-ups that reach full capacity in the first year.
Program context, honestly labelled
This page's inputs include no South Dakota food plant financed under B&I or VAPG, so none is described. USAspending lists three B&I guaranteed loans with South Dakota as place of performance in fiscal 2024 to 2026, with no industry detail in the records used here. The national food processing guide linked below is not a South Dakota project.
Hiring a USDA food processing feasibility study consultant in South Dakota
A new processing company borrowing over $1,000,000 under B&I must use an independent food processing feasibility study consultant acceptable to the Agency (5001.306(a)(3)(i)). The site's cost page lists value-added food processing among the asset classes where secondary data is sparse and primary research with buyers and suppliers is needed. The study covers the five Part 5001 components with supply and offtake analysis, process and utility review, and a five to ten year projection.
On the site's program fee table, standard B&I studies are $6,900 to $12,500 (6 to 7 weeks) and complex ones $10,500 to $14,500 (7 to 9 weeks); VAPG studies run $4,900 to $7,500 for planning grants and $6,500 to $9,500 for working capital grants. Engineering and environmental work is outside the fee.
Processors that already hold buyer letters can give the USDA feasibility study consultant a head start on the market chapter. Start with the product, supply plan, buyers and loan size on the contact page to request a proposal; replies come within one business day, per that page.
Last updated 2026-11-08
USDA Feasibility, Inc.