USDA Feasibility Study for Meat and Poultry Processing in South Dakota

    NAICS 3116

    South Dakota has more meat and poultry plants per resident than all but two other states: 44 in 2023, 4.8 per 100,000 residents against 1.1 nationally. The statewide average of 146.2 employees per plant, however, describes a handful of very large packers, not the plants a USDA B&I loan usually finances. Of the 37 plants whose size Census publishes, 27 employ fewer than ten people. A feasibility study for a new or expanded locker, custom processor or small inspected plant in South Dakota must therefore benchmark against small plants, of which the state has few with any public data, and SBA lenders have made only 12 meat-processing loans in the state since fiscal 2010.

    Data current as of November 2026.

    Which program fits a South Dakota meat processor

    RouteFit in South DakotaWhat to check first
    USDA B&I guaranteeNew and expanded inspected plants, lockers, and value-added meat lines outside Sioux Falls and Rapid CityRural parcel (7 CFR 5001.3); inspection route; livestock supply
    SBA 7(a)Equipment, small plant purchases and working capital; 12 South Dakota loans since fiscal 201075% guarantee above $150,000; fee ceilings (13 CFR 120.210, 120.220)
    SBA 504Owner-occupied plant buildings; one South Dakota loan since fiscal 2010Single-purpose plant raises the injection (120.910)
    Value-Added Producer GrantsLivestock producers processing their own animalsSeparate program rules (site's VAPG page)
    REAPRefrigeration and efficiency upgrades at an operating plantRule effective 16 October 2026
    ConventionalLarge packers and established processorsLender policy

    When the study is compulsory

    A newly formed processing company borrowing over $1,000,000 under B&I must submit an independent feasibility study acceptable to the Agency (7 CFR 5001.306(a)(3)(i)). South Dakota's six 7(a) meat loans in fiscal 2020 to 2026 averaged $314,067, far below that, but a new inspected plant with kill floor, coolers and processing room easily exceeds it. Existing lockers expanding are a discretionary case under 5001.306(a)(3)(ii). Plants above 50 jobs on loans above $1,000,000 also need Department of Labor concurrence (5001.306(a)(1)).

    Meat and poultry processing in South Dakota: market evidence

    South Dakota: meat and poultry processing, supply and rural footprint

    MeasureSouth DakotaUnited States
    Establishments, 2019 → 202340 → 44 (+10.0%)3,501 → 3,716
    Per 100,000 residents (2023)4.81.1
    Average employees per establishment146.2149.7
    Average annual pay per employee$60,868$50,981
    Share of establishments in non-metro counties50.0% (6 in 2 counties)
    Share of state population in non-metro counties (2025)48.7%

    Non-metro counties with the most meat and poultry processing (2023): Beadle County (3); Yankton County (3).

    Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.

    South Dakota meat plants by employment size, 2023 (CBP state file; larger classes withheld by Census)

    Employees per plantPlants
    Fewer than 520
    5 to 97
    10 to 1910
    20 or more (size classes withheld)7

    The size table is the key to reading the pack. Seven plants with 20 or more employees account for nearly all of the state's 6,433 meat-processing jobs, while 37 small plants employ the rest. Employment fell 6.7% from 2019 even as the plant count rose by four, consistent with new small plants opening while large plants trimmed staff. Pay of $60,868 per employee is 19.4% above the national figure, but that average is set by the large plants; a small locker's wage bill should be built from local rates for meat cutters and general labour. Census places only 12 of the 44 plants by county, three each in Beadle, Yankton, Meade and Minnehaha counties, so the location of the small plants is largely unknown from public data.

    Regional comparables (other states' figures)

    These rows are the neighbouring states' own pack figures.

    StateCensus count, 2019 → 2023Rate per 100k residents, 2023Average staff per siteAverage annual paySBA 7(a) loans, fiscal 2010 to 2026SBA 504 loans, fiscal 2010 to 2026
    South Dakota40 → 44 (+10.0%)4.8146.2$60,86812 ($3.8 million)1 ($451,000)
    North Dakota28 → 26 (-7.1%)3.329.3$53,7746 ($588,000)3 ($6.2 million)
    Nebraska117 → 122 (+4.3%)6.1250.3$58,44213 ($6.7 million)3 ($2.9 million)
    Iowa146 → 149 (+2.1%)4.6228.3$56,6308 ($11.0 million)6 ($2.4 million)
    Montana46 → 66 (+43.5%)5.89.9$37,98014 ($9.3 million)0 ($0)
    United States3,716 in 20231.1149.7$50,981498 ($299.3 million)108 ($124.8 million)

    Montana is the most useful comparison for a small South Dakota plant: 66 plants averaging 9.9 employees and growth of 43.5% since 2019, a small-plant expansion that South Dakota's +10.0% has not matched. Nebraska and Iowa, like South Dakota, are dominated by large packers (250.3 and 228.3 employees per plant). Montana's 14 SBA 7(a) loans, $9.3 million in total, against South Dakota's 12 loans and $3.8 million, suggest lenders there have financed larger small-plant projects.

    National benchmarks

    SBA made 213 7(a) loans to meat and poultry processors nationally in fiscal 2020 to 2026, averaging $711,656, 2.3 times South Dakota's average. Of 214 loans approved in fiscal 2010 to 2016, 3.7% were charged off, on average 72 months after approval, a moderate loss rate for a capital-heavy business. The national figure includes small and large plants together.

    Evidence the study must build when local comparables are thin

    1. Livestock supply within an economic haul distance: producers, head available by species and season, and letters of intent from producers.
    2. A sales plan by channel (retail counter, wholesale to grocers and restaurants, direct-to-consumer, custom work) with buyer letters where claimed.
    3. An inventory of competing plants by inspection status, species, capacity and backlog; the national meat processing guide sets out how federal, state and custom-exempt routes differ.
    4. Kill and processing capacity by day and week, tied to the building design, and the ramp to that capacity.
    5. The inspection timeline: the national guide notes that FSIS grants inspection only after sanitation procedures, recall procedures and a HACCP plan are in place, with a conditional grant of up to 90 days.
    6. Wastewater, rendering and by-product disposal arrangements and costs.
    7. Labour: skilled meat cutters in the commuting area and wages.

    Rural footprint and B&I eligibility in South Dakota

    The pack shows 6 of 12 county-placed plants (50.0%) in two non-metro counties, Beadle and Yankton, but with 32 plants unplaced, the share is not a reliable guide. B&I eligibility is a parcel test: 7 CFR 5001.3 excludes places of more than 50,000 residents and their contiguous urbanized areas, which in South Dakota are Sioux Falls (213,748) and Rapid City (80,589). A plant in Huron, Yankton or any livestock-area town passes on population; an industrial site on the edge of Sioux Falls needs a map check. The state hub has the full list of South Dakota places by size.

    Financing benchmarks: USDA B&I next to SBA

    South Dakota: SBA lending to meat and poultry processing

    Period7(a) loans7(a) dollars504 loans504 dollars
    FY2010 to FY20162$453,0000$0
    FY2017 to FY20194$1.5 million0$0
    FY2020 to FY20235$1.8 million1$451,000
    FY2024 to FY20261$129,0000$0

    Average 7(a) loan, FY2020 to FY2026: $314,067. Average 504 loan: $451,000. South Dakota had fewer than 30 seasoned 7(a) loans for meat and poultry processing; nationally, 3.7% of 214 FY2010 to FY2016 loans were charged off, on average 72 months after approval.

    Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).

    South Dakota meat loans are small and few. The six in fiscal 2020 to 2026 averaged $314,067, 55.9% below the national average, and the single 504 loan was $451,000. Neither of the two seasoned loans from fiscal 2010 to 2016 was charged off.

    B&I guaranteed loan terms for loans obligated in fiscal 2026

    TermRule and source
    Guarantee share85% for loans under $5 million; 80% from $5 million to $25 million; 80% on the reduced-fee path (91 FR 11272)
    Upfront guarantee fee3.0% of the guaranteed amount, or 1.0% on the reduced-fee path; plus 0.50% if the guarantee issues before construction is complete (91 FR 11272; 5001.454)
    Annual retention fee0.55% (0.50% on the reduced-fee path) of the guaranteed share of principal outstanding on 31 December; the rate is fixed at obligation (5001.455)
    Loan ceiling$25 million per borrower (5001.406(c))
    TermUseful life, at most 40 years; no balloon; first full payment within 3 years of the note if interest-only (5001.402)
    RateNegotiated; fixed, variable or combined; no higher than the lender charges on similar non-guaranteed loans; variable rates reset no more than quarterly (5001.401)
    Equity, existing business10% balance sheet equity (or debt to equity of 9:1), 10% of eligible project cost, or the contributed-capital test (5001.105(d)(1))
    Equity, new business20% balance sheet equity (or 4:1) or 25% of project cost; 10% with sales contracts that cover debt service; 25% (or 3:1) if the guarantee issues before construction ends (5001.105(d)(2) to (4))
    CollateralAppraisal for real estate over $250,000; as-is and prospective values for construction; going-concern value deducted before discounting; appraisals no older than one year (5001.203)
    GuarantorsOwners of 20% or more guarantee at least their share of the guaranteed amount for the full term (5001.204)
    Feasibility studyRequired from an independent qualified consultant for loans over $1,000,000 to a new business; at the Agency's discretion otherwise (5001.306(a)(3))

    For a small plant, B&I's value is size and term: a $2 million to $4 million inspected plant is larger than anything SBA has done in the state, and B&I can amortize the building over its useful life. Equipment-heavy plants have special-purpose collateral that lenders discount steeply. A new company needs 25% of project cost or 20% balance sheet equity; signed sales contracts that cover debt service would lower that to 10% under 5001.105(d)(2).

    Worked example (illustrative)

    South Dakota's six recent 7(a) meat loans are too few to anchor the example, so Loan A uses the national fiscal 2020 to 2026 average of $711,656, rounded to $710,000, over 15 years. Loan B, $3,000,000, is an illustrative new inspected plant over 20 years. Both are priced at an assumed 7.25% fixed, chosen for illustration and consistent with 5001.401 and 5001.402, with fiscal 2026 guarantee and retention fees and nothing else borrowed against the plant.

    LineLoan A: near the national SBA averageLoan B: illustrative inspected plant
    Loan amount$710,000$3,000,000
    B&I guarantee share for fiscal 2026 loans (91 FR 11272)85%85%
    Guaranteed amount$603,500.00$2,550,000.00
    Unguaranteed portion held by the lender$106,500.00$450,000.00
    Upfront guarantee fee (3.0% of the guaranteed amount)$18,105.00$76,500.00
    First-year retention fee, upper bound (0.55% of the guaranteed share of the full balance)$3,319.25$14,025.00
    Retention fee on the balance left after 12 monthly payments$3,192.12$13,700.98
    Illustrative rate and amortization (not a quote)7.25% fixed, 15 years, monthly7.25% fixed, 20 years, monthly
    Monthly principal and interest$6,481.33$23,711.28
    Annual debt service$77,775.92$284,535.35
    Net operating income needed for 1.25x coverage$97,219.90$355,669.19
    Cushion above 1.00x coverage$19,443.98$71,133.84
    Cushion in wages at the South Dakota meat-processing average pay ($60,868)0.32 positions1.17 positions
    Interest-only payment for a start-up year, if structured (5001.402)$51,475.00$217,500.00
    Annual debt service if the rate is 2.00 points higher$87,687.18$329,712.06
    Coverage at that higher rate on the same income1.11x1.08x
    Coverage if income lands 10% below plan1.125x1.125x
    New business: equity at 25% of project cost (5001.105(d)(4))$236,666.67 on a $946,666.67 project$1,000,000.00 on a $4,000,000.00 project
    New business: 20% balance sheet equity test (debt to equity 4:1, loan as the only debt)$177,500.00$750,000.00
    Existing business: 10% of project cost (5001.105(d)(1))$78,888.89 on a $788,888.89 project$333,333.33 on a $3,333,333.33 project
    Reduced-fee path (1.0% fee, 0.50% retention, 80% guarantee): upfront fee$5,680.00$24,000.00
    Independent study compulsory for a new business? (5001.306(a)(3)(i))No; the Agency may still require one (5001.306(a)(3)(ii))Yes, above $1,000,000
    Application track (5001.306)Full 5001.306(a) processingFull 5001.306(a) processing
    SBA 7(a) comparison: guaranteed share and guaranty fee ceiling (13 CFR 120.210, 120.220)75%: $532,500.00 guaranteed, fee ceiling $18,637.5075%: $2,250,000.00 guaranteed, fee ceiling $81,875.00

    Reading the table. Loan B needs $355,669.19 of net operating income for 1.25x, from a plant that may not sell inspected product until its grant of inspection is final. That is why an interest-only period, $217,500 in the first year if structured, and a funded start-up reserve often appear in meat plant budgets. For a new company, equity is $1,000,000 at 25% of cost or $750,000 under the balance sheet test. Loan A, an expansion-sized loan, goes through full processing because it exceeds $600,000, though the study is discretionary.

    What a lender-grade meat processing feasibility study in South Dakota must prove

    1. Livestock supply by species and season, with producer commitments.
    2. Sales by channel and the inspection status each channel requires.
    3. Capacity and throughput tied to the kill floor, coolers and processing room.
    4. The inspection timeline and cash flow through it.
    5. Competitor capacity and backlogs.
    6. By-product, rendering and wastewater costs.
    7. Labour availability and wages for skilled cutters.
    8. Sensitivity to livestock prices, throughput, selling prices and interest.

    Risks and mitigants

    RiskWhy it bites in South DakotaHow the study tests or mitigates it
    Few small-plant comparables27 of 37 sized plants employ under ten; little public dataProducer and buyer interviews; Montana and national benchmarks
    Livestock price swingsMargins depend on input and output pricesPrice sensitivity; custom-work revenue as a hedge
    Inspection delayNo inspected sales until grantedTimeline and reserve
    Seasonal custom workFall peaks for custom and game processingMonthly model
    LabourSkilled cutters are scarce in small townsTraining plan; wage sensitivity

    Process and documents

    Start with the inspection route and the livestock supply, then the lender. For B&I, the lender must be approved under the OneRD rule; it files the study with its application to the USDA Rural Development state office serving South Dakota. Sponsors provide producer and buyer letters, plant design and equipment quotes, the construction budget, wastewater and utility information, operating history for an existing plant, and financial statements. Meat plant studies are sent back for supply assumed from county livestock totals, sales without buyers, and no cash flow during the inspection start-up.

    Hiring a USDA meat processing feasibility study consultant in South Dakota

    A new processing company borrowing over $1,000,000 under B&I must have an independent meat processing feasibility study consultant acceptable to the Agency (5001.306(a)(3)(i)). The site's cost guide prices standard B&I studies at $6,900 to $12,500 over 6 to 7 weeks and complex ones at $10,500 to $14,500 over 7 to 9 weeks; a small South Dakota plant with thin comparable data often falls in the complex band. Producers who process their own animals and seek a VAPG grant can find that band on the same page. Because livestock supply drives everything else, it pays to have the USDA feasibility study consultant interview producers before the plant design is final.

    Request a proposal through the contact page with the species, capacity, town and loan size; the page commits to a response within one business day.

    Last updated 2026-11-08

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    Does a meat processing plant in South Dakota need a feasibility study?

    A new company borrowing over $1,000,000 under B&I must have one (7 CFR 5001.306(a)(3)(i)). New inspected plants usually exceed that; expansions of existing lockers often do not, and then the study is at the lender's or Agency's discretion. With 12 SBA meat loans in the state since fiscal 2010, most lenders want independent evidence of supply and sales regardless.

    What does a meat processing feasibility study consultant cost?

    On the site's cost guide, a meat plant study is either standard B&I scope ($6,900 up to $12,500) or, where comparables are scarce, complex scope ($10,500 up to $14,500). A small South Dakota plant is often benchmarked against out-of-state plants, which can make it complex. Plant engineering and environmental reviews are billed outside the study. The fee is fixed in a written proposal.

    How long does it take?

    Six to seven weeks for standard B&I scope and seven to nine for complex scope, per the site's cost page, with rush delivery in three to four weeks at a premium. Producer letters of intent and the inspection plan usually determine how quickly the study can be finished, so a sponsor should start collecting both before the engagement letter is signed.

    How does the study size a plant when local data is thin?

    From animals and buyers. It counts livestock available within the haul distance by species and season, net of what existing plants take, records producer commitments, and matches capacity to the sales the plant can secure. Montana's experience, 66 plants averaging 9.9 employees, shows a small-plant model the region supports; South Dakota's statewide average of 146.2 does not apply to a locker.

    Who can prepare the study?

    For compulsory B&I studies, an independent consultant acceptable to the Agency with no stake in the plant. Equipment suppliers, the builder, producer partners and the lender cannot. Their information is evidence the consultant tests and cites in the report, and the state office reviewer will look for that separation between the plant's backers and the study's author.

    How long does a meat plant study stay valid, and can SBA use it?

    There is no regulatory expiry, but USDA typically wants plant-market data under 18 months old, according to the site's cost guide. A change in livestock prices or the loss of a key buyer makes the study stale sooner. An independent study written to USDA's five components will also serve an SBA lender, while an SBA-only report would need its technical chapter expanded for B&I.

    Which inspection route should a South Dakota plant choose?

    It depends on where the product will be sold. Custom-exempt work serves owners of animals for their own use, and the national meat guide notes that product must be marked not for sale. Selling to retailers and restaurants requires inspection, and the guide describes the federal grant process. The study must match each sales channel to the inspection status it requires and model revenue only where the route allows sale; state program options should be confirmed with the relevant agency.

    Sources

    1. U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files: https://www2.census.gov/programs-surveys/cbp/datasets/
    2. U.S. Census Bureau, Vintage 2025 population estimates (state, county and incorporated places): https://www2.census.gov/programs-surveys/popest/datasets/2020-2025/
    3. Office of Management and Budget, metropolitan and micropolitan statistical area delineation, July 2023 (Census delineation file): https://www2.census.gov/programs-surveys/metro-micro/geographies/reference-files/2023/delineation-files/list1_2023.xlsx
    4. U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: https://data.sba.gov/dataset/7-a-504-foia
    5. 7 CFR Part 5001, OneRD Guaranteed Loanmaking and Servicing, CFR 2026 edition (govinfo): https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml
    6. 91 FR 11272, OneRD annual notice of guarantee fee rates, retention fee rates and guarantee percentages for fiscal year 2026 (govinfo): https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm
    7. 90 FR 57351, OneRD guaranteed loan regulation technical amendments, 11 December 2025 (govinfo): https://www.govinfo.gov/content/pkg/FR-2025-12-11/html/2025-22567.htm
    8. 89 FR 79698, OneRD guarantee loan final rule, 30 September 2024 (govinfo): https://www.govinfo.gov/content/pkg/FR-2024-09-30/html/2024-21920.htm
    9. 13 CFR Part 120, SBA business loan programs (CFR 2026 edition): https://www.ecfr.gov/current/title-13/chapter-I/part-120
    10. USAspending.gov prime award data for Assistance Listings 10.768, 10.766 and 10.868, place of performance South Dakota, fiscal 2024 to 2026: https://www.usaspending.gov/search
    11. USDA RBCS, Rural Energy for America Program (REAP), final rule with comment period, 91 FR 62600 (1 Oct 2026), effective 16 Oct 2026: https://www.govinfo.gov/content/pkg/FR-2026-10-01/html/2026-20178.htm
    12. USDA Feasibility Study Consultants, USDA feasibility study cost and timeline (fee bands, phases, rush terms, data recency): https://usda-feasibility-study.com/usda-feasibility-study-cost
    13. USDA Feasibility Study Consultants, contact and proposal request page: https://usda-feasibility-study.com/contact
    14. North Dakota, Nebraska, Iowa and Montana meat processing figures: this project's state packs built from the Census CBP, Vintage 2025 and SBA FOIA sources above.
    15. USDA Feasibility Study Consultants, national meat processing feasibility study guide (inspection routes, FSIS grant conditions, with its own 9 CFR sources): https://usda-feasibility-study.com/meat-processing-feasibility-study-usda

    Data current as of November 2026.

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours