USDA Feasibility Study for Meat and Poultry Processing in Vermont

    NAICS 3116

    Vermont's meat and poultry plants are tiny by national standards and growing fast. The state had 17 plants with paid staff in 2023, up from 13 in 2019 (+30.8 percent, five times the national 6.1 percent), averaging 19.7 employees each against 149.7 nationally. Most U.S. meat capacity is in very large plants; Vermont's is in small slaughterhouses and processors serving local livestock farms. A USDA meat processing feasibility study in Vermont has to prove what a small plant lives or dies on: enough animals within hauling distance, year-round, at a kill and cut volume that covers fixed inspection, labour and wastewater costs, and a sales channel for every pound the plant's inspection status allows it to sell.

    Meat processing in Vermont: market evidence

    Vermont: meat and poultry processing, supply and rural footprint

    MeasureVermontUnited States
    Establishments, 2019 → 202313 → 17 (+30.8%)3,501 → 3,716
    Per 100,000 residents (2023)2.61.1
    Average employees per establishment19.7149.7
    Average annual pay per employee$51,710$50,981
    Share of establishments in non-metro counties0.0% (0 in 0 counties)
    Share of state population in non-metro counties (2025)64.7%

    Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.

    Why the 0.0 percent non-metro figure is wrong in substance. The county file publishes a cell only where a county has three or more plants. Only Chittenden County qualifies, with 4; the remaining 13 plants (76.5 percent) belong to counties holding one or two apiece, drop out of the county tally, and leave the pack showing a non-metro share of zero. The arithmetic gives a floor instead: even if the two other metro counties, Franklin and Grand Isle, each held two plants, at least 9 of the 17 (52.9 percent) must be in non-metro counties. Vermont's meat plants are scattered one or two to a county across the state, which is what a reviewer should take from this table.

    Scale, pay and employment. Employment rose from 280 to 335 (+19.6 percent) and pay per employee from $45,221 to $51,710 (+14.3 percent), now a touch above the national $50,981. Payroll per plant is $1,019,000 against $7,630,719 nationally. The size classes for 16 plants show six with fewer than five employees, four with 10 to 19, three with 20 to 49 and three with 50 to 99. A new Vermont plant is therefore benchmarked against small and mid-sized local plants, not the national averages, which describe industrial packers.

    Regional comparison (other states' packs)

    Maine's pack shows 16 plants (1.1 per 100,000 residents, down from 17) averaging only 8.1 employees at $30,085; New Hampshire's shows 6 plants (0.4 per 100,000) averaging 30.3 employees at $57,247; New York's shows 138 plants (0.7 per 100,000), 22.7 employees each, pay of $53,350. Vermont has the highest density of the four and the strongest growth. Regional SBA lending is thin: from FY2020 through FY2026 New Hampshire plants took three 7(a) loans (average $79,167), Maine's a single $200,000 loan, and New York's seven (average $362,857).

    National benchmarks

    Nationally, 213 SBA 7(a) loans went to meat and poultry processors in FY2020 to FY2026, averaging $711,656, and 38 504 loans averaged $1,604,316. U.S. meat plant 7(a) loans from FY2010 through FY2016, 214 of them, show a 3.7 percent charge-off rate, losses landing about six years after approval.

    Demand, revenue and costs

    A meat plant has two markets. The supply market is livestock and poultry within an economic haul: head counts by species, the farms that would use the plant, the slots they need by month, and competing plants with their inspection status and backlog. The sales market is where the meat goes: farmers selling their own branded product, retailers, restaurants, institutions and direct-to-consumer buyers, each requiring the right inspection route. Income comes from slaughter fees charged per animal by species, cutting and packaging fees charged by the pound, sales of the plant's own meat where it buys livestock, and by-products, which may earn money or cost money to remove. Costs are labour (skilled cutters are scarce), inspection-related overtime, utilities and refrigeration, wastewater and offal handling, packaging, insurance and maintenance. Capital items are pens and unloading, the kill floor and rail, carcass coolers, processing and packaging rooms, freezers, inedible handling, wastewater pretreatment and a ramp-up reserve.

    Rural footprint and B&I eligibility in Vermont

    Given the suppression, the honest summary is that most Vermont plants are rural and at least 9 of 17 sit in non-metro counties, where 64.7 percent of the state's residents live. The B&I rule, 7 CFR 5001.3, shuts out municipalities above 50,000 inhabitants and the urbanized land touching them, and nothing else. With Burlington the state's largest place at 44,019 people in 2025, population never disqualifies a Vermont plant site; USDA confirms the parcel. The SPUR guaranteed loan described on the site's national meat page has no geographic restriction at all. The Vermont state guide covers the rest of the eligibility test.

    Section 5001.127 rejects a plant company, or any owner above 20 percent or in control, that is debarred, behind on federal taxes or loans, or subject to an unpaid federal judgment; owners at 20 percent and up sign guarantees (5001.204).

    Program fit

    Two USDA guarantees fit. B&I covers 85 percent of a rural plant loan below $5 million. SPUR, a guarantee for meat, poultry and seafood processors launched by a FY2027 funding notice and summarised on the site's national meat page, covers 90 percent of the loan, charges 3 percent at closing and 0.55 percent a year, and runs on Part 5001 rules. SBA has made five 7(a) and one 504 meat processing loan in Vermont since FY2010, the most recent 7(a) a $41,300 loan in FY2020 to FY2023. After opening, a plant may apply to REAP for more efficient refrigeration or on-site generation, under the rule in force since October 2026. Farmer-owned plants may also explore producer grants. Community Facilities does not fund private plants.

    TermUSDA B&I, fiscal 2026SPUR guaranteed loan (per the site's national meat page)Source
    Guarantee85% under $5 million90%91 FR 11272; 91 FR 67540
    Upfront fee3.0% of the guaranteed amount3%91 FR 11272; 91 FR 67540
    Annual retention fee0.55%0.55%91 FR 11272; 91 FR 67540
    Locationrural areas (5001.3)no geographic restriction7 CFR 5001.3; 91 FR 67540
    Termuseful life, 40 years at most, no balloonPart 5001 rules unless the notice differs7 CFR 5001.402
    Equity, new plant20% balance sheet equity (or 4:1), or 25% of project cost; 25% (or 3:1) with a guarantee before construction completionPart 5001 rules unless the notice differs7 CFR 5001.105(d)
    Independent feasibility studyrequired above $1,000,000 for a new businessPart 5001 rules unless the notice differs7 CFR 5001.306(a)(3)(i)

    Financing benchmarks: USDA B&I next to SBA

    Vermont: SBA lending to meat and poultry processing

    Period7(a) loans7(a) dollars504 loans504 dollars
    FY2010 to FY20163$1.1 million0$0
    FY2017 to FY20191$180,0000$0
    FY2020 to FY20231$41,3001$272,000
    FY2024 to FY20260$00$0

    Average 7(a) loan, FY2020 to FY2026: $41,300. Average 504 loan: $272,000. Vermont had fewer than 30 seasoned 7(a) loans for meat and poultry processing; nationally, 3.7% of 214 FY2010 to FY2016 loans were charged off, on average 72 months after approval.

    Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).

    Six loans for a growing sector. Vermont added four plants and 55 jobs between 2019 and 2023, yet SBA recorded just one 7(a) loan ($41,300) and one 504 loan ($272,000) for the sector in FY2020 to FY2026 and none since. Back in FY2010 to FY2016, three 7(a) loans averaged $368,667. The plants that opened were financed some other way, and any new project will be judged on its own study and equity rather than on a Vermont lending record.

    Worked example (illustrative)

    With only one Vermont 7(a) loan since FY2020, Loan A, $710,000, rounds the national meat processing 7(a) average for FY2020 to FY2026 ($711,656), and Loan B, $1,600,000, rounds the national 504 average ($1,604,316) for a new or rebuilt plant. Both assume 7.75 percent fixed over 20 years. The SPUR rows apply the 90 percent guarantee described on the site's national meat page.

    Input or resultLoan ALoan B
    Loan amount$710,000.00$1,600,000.00
    B&I guarantee percentage (fiscal 2026)85%85%
    B&I guaranteed amount$603,500.00$1,360,000.00
    B&I upfront fee (3.0%)$18,105.00$40,800.00
    B&I upfront fee if issued before construction completion (3.5%)$21,122.50$47,600.00
    B&I first retention fee (0.55% of the guaranteed share after 12 payments)$3,246.97$7,317.11
    SPUR guaranteed amount (90%)$639,000.00$1,440,000.00
    SPUR upfront fee (3%)$19,170.00$43,200.00
    SPUR first retention fee (0.55%)$3,437.97$7,747.53
    Monthly payment$5,828.73$13,135.18
    Annual debt service (NOI for 1.00x)$69,944.82$157,622.12
    NOI for 1.25x coverage$87,431.02$197,027.66
    Coverage at that NOI with a rate 2 points higher1.08x1.08x
    Coverage if NOI falls 20%1.00x1.00x
    Equity, new plant, 25% of project cost (5001.105(d)(4))$236,666.67$533,333.33
    Total project cost on that basis$946,666.67$2,133,333.33
    Equity, new plant, 20% balance sheet route (loan as sole liability)$177,500.00$400,000.00
    Equity, existing plant, 10% of project cost$78,888.89$177,777.78
    Independent study under 5001.306(a)(3)Agency discretionrequired for a new business

    Per-head test. If Loan A finances a plant killing an illustrative 40 head of cattle-equivalents a week for 50 weeks (2,000 a year), each head must contribute $43.72 of net operating income after all costs to reach 1.25x, and $34.97 to cover debt. Loan B at 80 a week (4,000 a year) needs $49.26 and $39.41. A small plant's fixed costs do not fall when farmers' animals are not ready, so the study tests the weeks when bookings drop, typically late winter and spring for many species, and shows coverage on the actual booking calendar rather than an even weekly average.

    What the higher SPUR guarantee changes. On Loan B, SPUR would guarantee $1,440,000 against $1,360,000 under B&I, leaving the lender $160,000 unguaranteed instead of $240,000, for $2,400.00 more in upfront fee. That smaller unguaranteed exposure can make a lender willing to finance a plant it would otherwise decline.

    Evidence the study must build when local comparables are thin

    1. Livestock supply: head counts by species within the haul radius, and letters of intent or booking commitments from farms, with the months they need slots.
    2. A survey of competing plants by inspection status, species, capacity, backlog and fees, built by direct contact because the Census data hide most Vermont plants.
    3. The inspection route for each sales channel, and the timeline to obtain a grant of inspection; the site's national page notes FSIS requires sanitation procedures, recall procedures and a HACCP plan, with an initial conditional grant of up to 90 days.
    4. Custom-exempt work modelled separately, since that product must be marked Not for Sale and used by the owner's household.
    5. Staffing: cutters and kill-floor staff at current pay ($51,710 Vermont average), with training time.
    6. Wastewater, blood and offal handling, with permits and costs confirmed.
    7. By-product revenue or disposal cost, and rendering access.
    8. A ramp-up plan and reserve that carries the plant through inspection approval and the first slow season.

    Risks and mitigants

    Supply seasonality is the first risk: bookings bunch in autumn and thin out in spring, so year-round anchor customers or a mix of species help. Labour is the second: one skilled cutter leaving can halve throughput. Inspection delays push revenue back while debt service starts. Wastewater limits can force costly pretreatment late in a project. Disease or market shocks can cut animal numbers suddenly. A meat plant is special-purpose; the 5001.203 appraisal removes going concern value, leaving owner cash and guarantees to do much of the work the building cannot.

    Process and documents

    A B&I package, study included, goes from the lender to Rural Development's Vermont office; SPUR applications follow that program's funding notice. The sponsor supplies farm commitments, the plant design and equipment list, the construction budget and contractor quotes, inspection plans, wastewater approvals, any operating history and statements, resumes and personal financial statements. Reviewers return studies that assume full booking from the first month, ignore the time to win inspection, or count farm demand without signed commitments.

    Program example

    None. The inputs name no Vermont meat plant financed through USDA.

    Hiring a USDA meat processing feasibility study consultant in Vermont

    When a start-up plant company wants B&I to guarantee over $1,000,000, 5001.306(a)(3)(i) demands an outside study written to USDA's scope; the site's national meat page notes that Part 5001's study rules also apply to SPUR unless its notice says otherwise. Smaller loans and existing plants are at the Agency's discretion. The meat processing feasibility study consultant you hire should earn nothing from the equipment order, the build, the animals or the financing.

    Pricing on the site runs $6,900 to $12,500 for a standard B&I job of about six or seven weeks, up to $14,500 when comparables are scarce, with a surcharge to go faster. Meat plants in Vermont often fall in the complex band because supply and competitor data must be gathered plant by plant and farm by farm. That fixed price covers the five chapters USDA expects, a model stressed for slow booking months and a late grant of inspection, the report and its workbook, a revision round and the written acceptance commitment; engineering, wastewater design and appraisals are separate. A capable USDA feasibility study consultant will want your farm commitment letters before modelling throughput.

    Send the plant's town, species, weekly head count, program (B&I or SPUR) and lender via the contact page; expect a senior analyst's reply by the following business day.

    Last updated 2026-11-08

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    Does a Vermont meat plant need a feasibility study for a USDA loan?

    Under B&I a newly formed plant company needs one once its loan passes $1,000,000 (5001.306(a)(3)(i)); a plant near the national 504 average of $1,604,316 qualifies. The site's national meat page says the same Part 5001 rule governs SPUR unless its notice says otherwise. Smaller loans and existing plants are at the Agency's discretion.

    What does a meat processing feasibility study consultant cost?

    The price list shows $6,900 to $12,500 for standard B&I work and up to $14,500 for complex jobs, fixed before the engagement begins. A Vermont plant study often lands in the complex band because suppliers and competitors must be surveyed directly. The upfront B&I fee on a $1,600,000 loan is $40,800.00.

    How long does a meat plant study take?

    Allow roughly six or seven weeks, up to nine for a complex plant; a rush can be bought. Vermont studies take longer when farm commitment letters must be collected across several counties or when the wastewater authority has not confirmed capacity. Inspection planning and HACCP timing go into the same calendar, because they set the first month of inspected sales.

    Who can prepare a meat processing study for USDA?

    A consultant with no stake in the plant whom USDA accepts; for required studies USDA also defines the content. Equipment suppliers, design-build firms and farms that will supply the plant all have an interest in the project, so their analyses are inputs, not the independent study. The bank then weighs it within the 5001.202 credit analysis.

    How long is a meat plant study valid?

    Part 5001 names no shelf life, though USDA generally wants data from the last 18 months, per the pricing page. Farm pledges and rival plants' capacity shift season to season, so update the study before filing if a competitor opens or shuts or a major farm pulls out. Vermont added four plants in four years.

    Can the same study support SBA, B&I and SPUR applications?

    One report can serve all three, provided each lender is listed as a user and each loan is modelled. SBA, for its part, may demand a study under 13 CFR 120.160(b). Since SPUR offers a 90 percent guarantee against 85 percent for B&I under $5 million, many sponsors will want both priced in one study.

    Why does the data show no Vermont meat plants in rural counties?

    Census withholds any county figure below three plants. Only Chittenden County, with 4, is published; the other 13 plants sit in counties with one or two each. At least 9 of the 17 must be in non-metro counties, so the 0.0 percent figure reflects suppression, not location. Chittenden's four are the only published cell.

    How does seasonality affect a small Vermont plant?

    Bookings follow farm calendars, so kill slots often fill in autumn and empty in spring. A plant's labour, inspection and wastewater costs continue regardless. The study should model weekly bookings by species and month, test coverage in the slow months, and size a reserve, rather than spread annual volume evenly.

    Is SPUR better than B&I for a Vermont meat plant?

    It depends on the project. SPUR's 90 percent guarantee leaves the lender less unguaranteed exposure, $160,000 on a $1,600,000 loan against $240,000 under B&I, and it has no rural test, but its funding availability and terms are set in its notice. The study can model both, and the lender chooses.

    Sources

    1. U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files: https://www2.census.gov/programs-surveys/cbp/datasets/
    2. U.S. Census Bureau, Vintage 2025 population estimates (state, county and incorporated places): https://www2.census.gov/programs-surveys/popest/datasets/2020-2025/
    3. Office of Management and Budget, metropolitan and micropolitan delineation, July 2023: https://www2.census.gov/programs-surveys/metro-micro/geographies/reference-files/2023/delineation-files/list1_2023.xlsx
    4. U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: https://data.sba.gov/dataset/7-a-504-foia
    5. 7 CFR Part 5001, OneRD Guaranteed Loanmaking and Servicing, CFR 2026 edition (govinfo): https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml
    6. 91 FR 11272, OneRD annual notice of guarantee fee rates, retention fee rates and guarantee percentages for FY2026 (govinfo): https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm
    7. USDA RBCS, Notice of Funding Opportunity for the SPUR Guaranteed Loan Program for FY2027, 91 FR 67540 (27 Oct 2026), as cited on the site's national meat processing page: https://www.govinfo.gov/content/pkg/FR-2026-10-27/html/2026-21858.htm
    8. 9 CFR parts 303 and 304 (exemptions; grant of inspection), as cited on the site's national meat processing page: https://www.govinfo.gov/content/pkg/CFR-2026-title9-vol2/xml/CFR-2026-title9-vol2-part304.xml
    9. 13 CFR Part 120, SBA business loan programs: https://www.ecfr.gov/current/title-13/chapter-I/part-120
    10. Site pages: /meat-processing-feasibility-study-usda, /usda-feasibility-study-cost, /contact

    Data current as of November 2026.

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours