USDA Feasibility Study for Meat and Poultry Processing in Wisconsin

    NAICS 3116

    Meat processing in Wisconsin is a short list of large plants and a long tail of small ones. The Census counts 135 meat and poultry processing establishments in 2023, 2.3 per 100,000 residents against 1.1 nationally, with 18,089 employees: 134 per plant on average, paid $59,960, which is 17.6% above the national meat-plant wage. The count fell from 143 in 2019 even as the national total grew 6.1% (computed). Of the plants the county file places, 42 of 100 are in non-metro counties led by Polk, Dodge and Shawano. The state hub frames the opportunity around meat and dairy beef processing capacity. For a new or expanding plant seeking a USDA Business and Industry (B&I) guarantee, the feasibility study is where livestock supply, kill or processing capacity, and buyers are tied together.

    Data current as of November 2026.

    Is a study required for a Wisconsin meat plant, and which programs fit?

    Wisconsin's average SBA 7(a) meat-processing loan from FY2020 to FY2026 was $959,991, a few thousand dollars below the line that makes a study compulsory. Under 5001.306(a)(3)(i), any new company whose B&I-guaranteed loan exceeds $1,000,000 must submit a study by a qualified independent consultant, scoped by the Agency. A modest cost overrun or an added cooler can push a project across that line, so many new plants should plan on the requirement from the start. Below it, USDA decides under 5001.306(a)(3)(ii), and requests up to $600,000 can use the streamlined application.

    Several programs can sit in one capital stack. B&I guarantees 85% of loans under $5 million and can amortise a plant building over as long as 40 years (5001.402). SBA 7(a) and 504 have made 30 Wisconsin meat-processing loans since FY2010 (computed). The hub says projects can pair B&I with the Meat and Poultry Processing Expansion Program (MPPEP) grants, and lists a $456,129 award to Wilson Farm Meats in Elkhorn for processing equipment. The hub also states that SPUR now guarantees 90% of processing loans; that program's terms are not in the verified rules this page relies on, so a sponsor should confirm them with USDA. REAP can later co-fund refrigeration efficiency, but the 16 October 2026 rule makes the plant run the system for twelve months before applying.

    Owner screens under 5001.127(a) (federal judgments, delinquent federal tax or debt, debarment) apply to every owner of 20% or more and anyone in control.

    Meat processing in Wisconsin: market evidence

    Wisconsin: meat and poultry processing, supply and rural footprint

    MeasureWisconsinUnited States
    Establishments, 2019 → 2023143 → 135 (-5.6%)3,501 → 3,716
    Per 100,000 residents (2023)2.31.1
    Average employees per establishment134.0149.7
    Average annual pay per employee$59,960$50,981
    Share of establishments in non-metro counties42.0% (42 in 11 counties)
    Share of state population in non-metro counties (2025)25.4%

    Non-metro counties with the most meat and poultry processing (2023): Polk County (6); Dodge County (5); Shawano County (5); Clark County (4); Trempealeau County (4); Barron County (3).

    Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.

    Computed: Wisconsin meat plants by type, 2019 and 2023 (Census CBP state files)

    Plant type (NAICS)20192023Employees 2023Average pay 2023
    Animal slaughtering (311611)56545,643$54,305
    Meat processed from carcasses (311612)757010,037$63,196
    Rendering and byproducts (311613)64204$83,485
    Poultry processing (311615)672,205$57,527

    The structure is consolidating. Slaughter plants fell from 56 to 54 and further-processing plants from 75 to 70, yet further-processing employment rose 11.0% to 10,037 (computed): fewer plants, more work in each. The 2.3 plants per 100,000 residents is roughly double the national density, which reflects Wisconsin's livestock base, but it also means a new plant enters a market with established buyers of cattle and established sellers of product.

    Pay is high for the industry. At $59,960 Wisconsin meat workers earn 17.6% more than the national average, and pay in the industry rose from $48,982 in 2019 (computed). A small plant planning on entry-level wages will be competing with the larger plants in the same labour shed. Rural density is 2.77 plants per 100,000 non-metro residents against 1.30 in metro counties; 35 plants are in counties the Census file suppresses, so the true rural count is higher.

    A reviewer will test four things first: the livestock supply contracts or market evidence behind daily throughput, the inspection status the plant will operate under, the product and customer mix, and the ramp from opening to stable volume.

    Rural footprint and B&I eligibility in Wisconsin

    Meat plants seldom fail the rural test, but the test is still parcel-specific. 7 CFR 5001.3 excludes cities over 50,000 at the 2020 census (the hub lists twelve in Wisconsin) and the urbanized areas contiguous to them. Milwaukee (11 plants), Brown (8) and Dane (7) counties hold the largest metro clusters, and a plant inside Milwaukee, Green Bay or Madison or their urbanized areas would be excluded. The non-metro leaders, Polk, Dodge, Shawano, Clark and Trempealeau, sit largely outside excluded areas, though Polk County's western edge borders the Minneapolis–St. Paul region and the hub flags nearby Hudson as likely inside that urbanized area. The Wisconsin USDA page has the screen.

    Financing benchmarks: USDA B&I next to SBA

    Wisconsin: SBA lending to meat and poultry processing

    Period7(a) loans7(a) dollars504 loans504 dollars
    FY2010 to FY201612$1.5 million2$693,000
    FY2017 to FY20191$1.9 million0$0
    FY2020 to FY20238$9.6 million3$4.2 million
    FY2024 to FY20263$935,0001$1.5 million

    Average 7(a) loan, FY2020 to FY2026: $959,991. Average 504 loan: $1.4 million. Wisconsin had fewer than 30 seasoned 7(a) loans for meat and poultry processing; nationally, 3.7% of 214 FY2010 to FY2016 loans were charged off, on average 72 months after approval.

    Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).

    B&I terms for a Wisconsin meat plant (FY2026 notice, 91 FR 11272; 7 CFR 5001)

    TermRuleMeat plant reading
    Guarantee85% under $5 million; 80% from $5 million to $25 millionSmall and mid-size plants sit in the 85% tier
    Fees3.0% upfront on the guaranteed amount; 0.55% retention a year$24,480 upfront on a $960,000 loan
    EquityNew plant with guarantee before construction ends: 25% balance sheet equity or 25% of cost; other new: 20% or 25% of cost; existing: 10% (5001.105(d))Most new plants are built, so plan on 25%
    ConstructionFixed-price contract, independent inspection, contingencies, start-up working capital, equity before loan funds (5001.205(e)(2))Equipment delivery delays are common
    Start-up cash flowQuarterly cash flow through start-up when the guarantee issues before completion (5001.202)Shows the ramp month by month
    TermUseful life up to 40 years, no balloon (5001.402)Building long, processing equipment shorter

    SBA's Wisconsin history in this class is thin but telling. Only 30 meat-processing loans were made in seventeen years, and the 12 seasoned 7(a) loans from FY2010 to FY2016 show no charge-offs at all (computed), against 3.7% of 214 nationally. Loan sizes jumped after 2020: eight 7(a) loans in FY2020 to FY2023 totalled $9.6 million, about $1.2 million each, against $127,000 each in the earlier period (computed). That shift matches the hub's account of new processing capacity and makes the $1,000,000 study trigger directly relevant. The rates shown come from the FY2026 notice; the FY2027 percentages and fees still need confirming at closing.

    Worked example (illustrative)

    Inputs: a $960,000 loan, rounded from the state's FY2020 to FY2026 7(a) average of $959,991. Assumed 7.25% fixed, 20 years, monthly payments, within 5001.401 and 5001.402. Retention fee on the balance after 12 payments. The throughput stress scales net operating income in proportion to volume, a simplification; the reserve line is six months of debt service.

    Computed: a Wisconsin meat plant loan under B&I (Python, exact to the cent)

    LineAmount
    Loan$960,000.00
    Guaranteed at 85%$816,000.00
    Upfront fee, 3.0%$24,480.00
    Monthly payment, 7.25%, 20 years$7,587.61
    Annual debt service$91,051.31
    Retention fee on $937,821.33 after 12 payments$4,384.31
    Net operating income for 1.25x$113,814.14
    Six months of debt service as a start-up reserve$45,525.66
    Coverage if throughput runs at 70% of plan0.875x
    Coverage at 9.25%1.079x
    New plant built with an early guarantee: 25% of project cost$320,000.00 on $1,280,000.00
    Existing plant expanding: 10% of project cost$106,666.67 on $1,066,666.67

    The plant needs $113,814.14 of annual net operating income for 1.25x. The throughput line is the one to watch: a plant running at 70% of planned volume, a common position in the first year while livestock suppliers and buyers are still being won, covers only 0.875x. That is why lenders size a start-up reserve, here $45,525.66 for six months, and why 5001.202 asks for quarterly cash flow through start-up. A new plant needs $320,000 of equity at 25% of cost; an established Wisconsin processor adding a line could close at $106,666.67 under the 10% test.

    Wisconsin risks a meat processing study has to carry

    • Livestock supply. The hub ties the opportunity to dairy beef and meat capacity; the study must show committed or documented animal supply, by week, at the throughput assumed.
    • Consolidation. Plant numbers fell 5.6% while the remaining plants grew; a new entrant needs a reason buyers will switch.
    • Labour. Average pay of $59,960 and rising (up 22.4% since 2019, computed) sets the wage a new plant must meet.
    • Inspection and food safety. The plant's inspection status determines which customers it can sell to; confirm the regulator and timeline (not covered by the inputs).
    • Byproducts and waste. Rendering plants fell from 6 to 4 (computed); disposal arrangements and cost belong in the operating budget.
    • Grant timing. MPPEP awards, like the one the hub lists, should enter the sources only when awarded; REAP pays only after a year of operation.

    What a lender-grade meat processing feasibility study in Wisconsin must prove

    1. A 5001.3 determination for the plant parcel.
    2. Livestock or raw-material supply by species and week, with letters of intent or contracts.
    3. Capacity: head per day or pounds per shift, cooler and freezer space, and the bottleneck.
    4. Product and customer mix: custom, wholesale, retail and institutional, with pricing evidence.
    5. Inspection pathway, food safety plan and timeline to approval.
    6. Capital budget split between building, processing equipment and refrigeration, with useful lives.
    7. A start-up ramp with quarterly cash flow, working capital and a reserve; 1.25x at stabilisation, stressed for volume and margins.
    8. Labour plan with local wages; management experience in meat operations.
    9. Waste, water and byproduct handling with costs.

    Hiring a USDA meat processing feasibility study consultant in Wisconsin

    With the state's average loan sitting just under $1,000,000, a new plant is one budget revision away from a mandatory, Agency-scoped study; below the line the lender or USDA will usually ask anyway. The author should be a USDA feasibility study consultant independent of the equipment dealer, the builder, the livestock suppliers and the lender, and able to test throughput, yields and margins rather than repeat the sponsor's plan.

    Under the site's published fee ranges, a standard B&I plant study costs $6,900 to $12,500 and is delivered in six to seven weeks; multi-species plants, phased construction or thin comparable data put it at $10,500 to $14,500 with delivery inside nine weeks, and rush delivery in three to four weeks adds 20% to 35%. Every engagement is quoted as a fixed fee and includes the five Part 5001 components, supply and demand analysis, operator benchmarks, a management assessment, multi-year projections stressed for volume and price, and revisions without charge until the lender or USDA signs off. Have ready the plant layout and capacity, equipment quotes, livestock supply letters, buyer letters or current sales, the construction budget and schedule, and the bank's term sheet. The national USDA meat processing feasibility study guide covers program detail. Ready to scope the plant? Ask for a fixed-fee proposal; a first response arrives within one business day, per the contact page.

    Program example

    From the Wisconsin hub: USDA's Meat and Poultry Processing Expansion Program awarded $456,129 to Wilson Farm Meats in Elkhorn for processing equipment (the hub dates it to 2026). It is a grant, not a B&I guarantee, and shows the kind of award a study can account for in the capital stack. National program example (outside Wisconsin): the site's Missouri meat processing case study analyses independent capacity expansion under B&I.

    Last updated 2026-11-08

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    Must a new Wisconsin meat plant file a feasibility study to get USDA credit?

    It must when the borrower is a start-up and the guaranteed B&I loan passes $1,000,000 (7 CFR 5001.306(a)(3)(i)). The state's average 7(a) meat-processing loan since FY2020 was $959,991, just below that line, so a new plant with any added scope often crosses it. Below the line, USDA may still require one under 5001.306(a)(3)(ii), and lenders usually do for new construction.

    What does a meat processing feasibility study consultant charge for a Wisconsin plant?

    A standard B&I meat plant study is listed by the site at $6,900 to $12,500. A multi-species plant, a phased build or a project with little comparable operating data moves to $10,500 to $14,500. That price is locked in the proposal; plant engineering, environmental assessments and appraisal are separate engagements.

    How long does a meat plant study take?

    A standard plant study runs six to seven weeks; complex ones need up to nine. Livestock supply letters and buyer interviews are usually the slowest inputs. Where an application date is fixed, a compressed three to four week schedule costs 20% to 35% more and depends on analyst availability.

    Who can prepare a meat processing study for USDA?

    A qualified consultant who is independent of the project and acceptable to the Agency. The equipment supplier, the plant designer and the livestock buyer can provide specifications and letters, but they cannot be the author. The preparer should be able to evaluate throughput, yields and inspection timelines.

    How long is a meat processing study good for?

    There is no expiry in the regulation. The cost page's rule of thumb is evidence under about 18 months old for USDA, and the closing appraisal must be less than a year old under 5001.203. A change in livestock prices, a lost buyer or a new competing plant nearby should trigger an update.

    Will one study work for SBA and B&I?

    Generally yes: SBA's right to request a study under 13 CFR 120.160(b) is satisfied by a report written to USDA's five-part standard. With only 30 Wisconsin meat-processing SBA loans since FY2010, many lenders have little direct experience of the class, so a study that tests 7(a), 504 and B&I structures side by side is useful.

    Can a Wisconsin meat plant combine B&I with a USDA processing grant?

    The hub says projects can pair B&I with the Meat and Poultry Processing Expansion Program, and lists a $456,129 award to Wilson Farm Meats in Elkhorn. Grant funds reduce the loan or the owner's cash only once awarded; the study should show the project working with and without the grant until it is.

    Does SPUR's guarantee replace B&I for meat plants?

    The Wisconsin hub states that SPUR now guarantees 90% of processing loans. Those terms are not among the verified rules used for this page, so confirm the program's availability, percentage and fees with USDA or your lender. B&I's FY2026 terms are verified: 85% under $5 million, a 3.0% upfront fee and 0.55% annual retention.

    Why are Wisconsin meat plants so large on average?

    Because the count is dominated by established slaughter and further-processing plants. Further-processing plants averaged about 143 workers in 2023 (10,037 across 70 plants, computed). Small custom plants exist, but the statewide averages for wages and staffing come from the large ones, so a small plant should benchmark itself against comparable operators, not the average.

    Sources

    1. U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files: https://www2.census.gov/programs-surveys/cbp/datasets/
    2. U.S. Census Bureau, Vintage 2025 population estimates (state, county and incorporated places): https://www2.census.gov/programs-surveys/popest/datasets/2020-2025/
    3. Office of Management and Budget, metropolitan and micropolitan delineation, July 2023: https://www2.census.gov/programs-surveys/metro-micro/geographies/reference-files/2023/delineation-files/list1_2023.xlsx
    4. U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: https://data.sba.gov/dataset/7-a-504-foia
    5. 7 CFR Part 5001, CFR 2026 edition (govinfo): https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml
    6. 91 FR 11272, OneRD annual notice of guarantee and retention fees and guarantee percentages for FY2026: https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm
    7. 13 CFR Part 120, SBA business loan programs: https://www.ecfr.gov/current/title-13/chapter-I/part-120
    8. USDA RBCS, Rural Energy for America Program final rule with comment period, 91 FR 62600 (1 Oct 2026): https://www.govinfo.gov/content/pkg/FR-2026-10-01/html/2026-20178.htm
    9. USDA Feasibility Study Consultants, Wisconsin state page (dairy beef capacity, MPPEP and SPUR statements, Wilson Farm Meats award, eligibility screens as the site reports them): https://usda-feasibility-study.com/wisconsin
    10. USDA Feasibility Study Consultants, cost and timeline page: https://usda-feasibility-study.com/usda-feasibility-study-cost
    11. USDA Feasibility Study Consultants, contact page: https://usda-feasibility-study.com/contact

    Data current as of November 2026.

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours