Wisconsin is one of the most manufacturing-dense states in the country. The 2023 Census count is 8,479 manufacturing establishments, 143.0 per 100,000 residents against 84.5 nationally, employing 479,846 people at an average of 56.6 workers per plant. The base is not only metropolitan: 2,420 plants, 28.5% of those placed by county, sit in non-metro counties led by Walworth (196), Manitowoc (168), Jefferson (147) and Dodge (139). That is the ground where USDA's Business and Industry (B&I) guarantee program does its work, financing plant construction, expansion and equipment for rural manufacturers. For a new company or a large expansion, the feasibility study is what lets the lender and USDA judge the market, the process and the cash flow before they commit.
Data current as of November 2026.
When a plant needs a study, and which program fits
A study is mandatory under 7 CFR 5001.306(a)(3)(i) when a new business seeks a B&I-guaranteed loan above $1,000,000; the consultant must be independent, qualified and acceptable to the Agency, which also sets the scope. Many Wisconsin manufacturing loans pass that size: the hub calculates that 22 Wisconsin B&I guarantees in FY2021 to FY2024 averaged about $3.26 million. Existing manufacturers borrowing for an expansion fall under 5001.306(a)(3)(ii), where USDA decides case by case, and requests at or under $600,000 may be filed on the short form in 5001.306(b).
A second rule matters more for manufacturing than for most assets. Under 5001.306(a)(1), a guaranteed loan above $1,000,000 that will create more than 50 jobs needs Department of Labor concurrence. The average Wisconsin plant employs 56.6 people, so a new plant of typical size crosses that line; the study's employment plan should state the job count clearly.
Program choice is wide. B&I covers land, buildings, machinery, equipment and working capital at an 85% guarantee below $5 million and 80% from $5 million to $25 million (91 FR 11272), and its 5001.402 term follows the assets' useful life to a 40-year ceiling. On the SBA side, 7(a) and 504 have financed 3,043 Wisconsin manufacturing loans since FY2010 worth $2.04 billion (computed). REAP can co-fund efficiency or renewable systems once they have operated for 12 months, under the rule effective 16 October 2026. Owner screens in 5001.127 apply: no federal judgments, delinquent federal tax or debt, or debarment for owners of 20% or more, and no income from illegal products.
Manufacturing in Wisconsin: market evidence
Wisconsin: manufacturing establishments (all), supply and rural footprint
| Measure | Wisconsin | United States |
|---|---|---|
| Establishments, 2019 → 2023 | 8,680 → 8,479 (-2.3%) | 287,626 → 284,452 |
| Per 100,000 residents (2023) | 143.0 | 84.5 |
| Average employees per establishment | 56.6 | 43.4 |
| Average annual pay per employee | $68,429 | $73,202 |
| Share of establishments in non-metro counties | 28.5% (2,420 in 44 counties) | |
| Share of state population in non-metro counties (2025) | 25.4% |
Non-metro counties with the most manufacturing establishments (all) (2023): Walworth County (196); Manitowoc County (168); Jefferson County (147); Dodge County (139); Wood County (115); Polk County (92).
Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.
Computed: Wisconsin manufacturing by county type and over time (Census CBP 2019 and 2023 state and county files)
| Measure | Value |
|---|---|
| Plants per 100k residents, counties outside metro areas | 159.63 |
| Plants per 100,000 residents, metro counties | 135.91 |
| Manufacturing employment, 2019 → 2023 | 478,852 → 479,846 (+0.2%) |
| Average pay per worker, 2019 → 2023 | $56,819 → $68,429 (+20.4%) |
| Annual manufacturing payroll, 2023 | $32.8 billion |
Consolidation, not decline, is the story. Wisconsin lost 201 plants from 2019 to 2023 (-2.3%, against -1.1% nationally, computed) while employment held at about 480,000, so the surviving plants are larger. At 56.6 workers the average plant is 30% bigger than the US average of 43.4. Rural Wisconsin is more industrial than its cities: non-metro counties carry 159.63 plants per 100,000 residents against 135.91 in metro counties.
Pay is the number to watch. The average of $68,429 is 6.5% below the national figure, but it rose 20.4% in four years. A pro forma built on 2019 labour costs, or on a national wage, will be wrong in both directions. For a rural plant the reviewer's question is less the wage than the labour shed: can the county supply the headcount the plan assumes, given that the existing plants already employ most of the skilled workforce?
A reviewer will also test customer concentration, the contract position behind the sales forecast, and whether the capital budget's equipment lives match the requested term.
Rural footprint and B&I eligibility in Wisconsin
Plants cluster in metro counties too (Milwaukee 847, Waukesha 825, Dane 511, Brown 441 in the county file), and that is where the rural test does its work. Under 7 CFR 5001.3 the plant site fails if it falls within a 2020-census city of more than 50,000 people or that city's contiguous urbanized area, and passes otherwise. The hub lists 12 such cities, Waukesha among them. An industrial park outside an excluded city's urbanized area can qualify even in a metro county; one inside cannot, whatever the county. The hub flags Beloit and River Falls for a map check and treats the Sheboygan, Fond du Lac and Wausau areas as eligible. USDA will not approve a plant conditionally on later proving rural status, so the map check precedes the application; the Wisconsin USDA page explains the screen.
Financing benchmarks: USDA B&I next to SBA
Wisconsin: SBA lending to manufacturing establishments (all)
| Period | 7(a) loans | 7(a) dollars | 504 loans | 504 dollars |
|---|---|---|---|---|
| FY2010 to FY2016 | 1,358 | $691.6 million | 264 | $212.4 million |
| FY2017 to FY2019 | 410 | $244.0 million | 87 | $88.1 million |
| FY2020 to FY2023 | 463 | $329.6 million | 189 | $222.5 million |
| FY2024 to FY2026 | 224 | $191.6 million | 48 | $58.6 million |
Average 7(a) loan, FY2020 to FY2026: $758,751. Average 504 loan: $1.2 million. Of the 1,358 7(a) loans approved in FY2010 to FY2016 for Wisconsin manufacturing establishments (all), 4.2% were charged off (national: 6.4% of 27,078), on average 67 months after approval.
Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).
B&I rules a Wisconsin plant loan will meet (91 FR 11272; 7 CFR 5001)
| Term | Rule | Manufacturing reading |
|---|---|---|
| Guarantee | 85% below $5 million; 80% from $5 million to $25 million; cap $25 million per borrower (5001.406(c)) | The tier step at $5 million changes the guaranteed dollars |
| Fees | 3.0% upfront; 0.55% annual retention; reduced fee 1.0% / 0.50% at 80% where 5001.454 criteria are met | Budget both in sources and uses |
| Equity | Existing 10%; new business with contracts covering debt service 10%; new construction with early guarantee 25%; other new 20% balance sheet or 25% of cost (5001.105(d)) | Offtake contracts can cut equity sharply |
| Labour | DOL concurrence above $1,000,000 and 50 jobs (5001.306(a)(1)) | A typical new plant crosses it |
| Term | Useful life up to 40 years; no balloon (5001.402) | Real estate long, equipment shorter |
| Collateral | Appraisal; discounts justified; going-concern value deducted (5001.203) | Special-purpose machinery is discounted hard |
Wisconsin manufacturers repay better than the national average: 57 of 1,358 seasoned 7(a) loans were charged off (4.2%) against 6.4% nationally, and the lost dollars were 2.8% of the total lent (computed). Lending has kept pace since 2020, with 687 7(a) and 237 504 loans, and the 504 average of $1,186,219 (computed) shows owners financing buildings as well as equipment. For B&I the implication is that a Wisconsin plant with a credible customer base enters a class the lender already trusts; the study's job is to show the project belongs in that record. Fee rates shown are FY2026; confirm the FY2027 notice before closing.
Worked example (illustrative)
Inputs: Loan A is $760,000, close to the $758,751 average Wisconsin manufacturing 7(a) loan since FY2020, amortised over 15 years. Loan B is $3,260,000, the hub's calculated average Wisconsin B&I guarantee size, over 20 years. Both at 7.0% fixed with monthly payments, assumptions within 5001.401 and 5001.402. Retention fees use the balance after 12 payments. The final rows show the $5 million guarantee step at the same rate and term as Loan B.
Computed: manufacturing loans under B&I at two sizes (Python, exact to the cent)
| Line | Loan A | Loan B |
|---|---|---|
| Loan | $760,000.00 | $3,260,000.00 |
| Guaranteed at 85% | $646,000.00 | $2,771,000.00 |
| Upfront fee, 3.0% | $19,380.00 | $83,130.00 |
| Monthly payment | $6,831.09 | $25,274.75 |
| Annual debt service | $81,973.14 | $303,296.94 |
| First-year retention fee | $3,414.08 | $14,877.94 |
| Cash flow for 1.25x coverage | $102,466.42 | $379,121.18 |
| Cash flow decline that takes coverage to 1.00x | 20% | 20% |
| New business, 25% of project cost | $253,333.33 on $1,013,333.33 | $1,086,666.67 on $4,346,666.67 |
| New business with qualifying contracts, 10% of cost | $84,444.44 on $844,444.44 | $362,222.22 on $3,622,222.22 |
Computed: the guarantee step at $5 million (7.0%, 20 years)
| Line | $4,900,000 loan | $5,100,000 loan |
|---|---|---|
| Guarantee percentage | 85% | 80% |
| Guaranteed amount | $4,165,000.00 | $4,080,000.00 |
| Upfront fee, 3.0% | $124,950.00 | $122,400.00 |
| Annual debt service | $455,875.77 | $474,482.95 |
Loan B is the more representative B&I deal: a plant needs $379,121.18 of cash flow available for debt service to reach 1.25x, and a 20% shortfall leaves exactly 1.00x. The equity lines show why contracts matter. Under 5001.105(d)(2), a new business with sales contracts adequate to service the debt, running at least as long as the loan, can close at 10% of project cost instead of 25%, which on Loan B is $362,222.22 rather than $1,086,666.67. The step table shows a quirk worth planning around: borrowing $5,100,000 earns a smaller guaranteed amount ($4,080,000) than borrowing $4,900,000 ($4,165,000), because the percentage falls from 85% to 80%. A lender sizing a loan near the line may prefer to stay under it.
Wisconsin risks a manufacturing study has to carry
- Customer concentration. Supplier plants tied to one buyer (the hub names food and dairy equipment and paper machinery among the state's sectors) need contract terms and the buyer's credit in the study.
- Labour shed. Rural counties with 100 or more plants share a finite workforce; the plan should show recruitment evidence and wage rates.
- Job count and DOL. More than 50 jobs on a loan above $1,000,000 triggers Department of Labor concurrence, which adds a step to the timeline.
- Equipment collateral. 5001.202 requires collateral discounts to be justified; specialised lines may carry little resale value.
- Construction. A guarantee issued before completion requires a fixed-price contract, contingencies, start-up working capital and equity injected first (5001.205(e)(2)).
- Program timing. According to the hub, USDA stops taking new B&I applications on its current platform on 20 November 2026 while a replacement portal is built.
What a lender-grade manufacturing feasibility study in Wisconsin must prove
- A dated 5001.3 determination for the plant site.
- The market for the product: customers, volumes, pricing and any contracts, letters of intent or purchase orders.
- The competitive position against other producers, in Wisconsin and beyond.
- Technical feasibility: process, capacity, equipment specifications and the construction or installation schedule.
- A labour plan by position with local wage evidence and recruitment sources.
- Capital costs and useful lives that support the requested term, and the collateral those assets provide.
- Five to ten year projections with ramp-up, working capital and 1.25x coverage at stabilisation, stressed for volume, price and input costs.
- Management depth and the global cash flow of affiliates and guarantors (5001.202, 5001.204).
- The job count for DOL concurrence and the owner screens in 5001.127.
Hiring a USDA manufacturing feasibility study consultant in Wisconsin
When a newly formed company borrows above $1,000,000 under B&I, USDA requires the study and defines its scope; for an existing manufacturer, the lender or the Agency decides. The author must be independent of the equipment vendors, the builder, the buyers and the loan. A USDA feasibility study consultant for a plant should be able to read customer contracts, process specifications and cost structures, not only market data.
The site's pricing page places a single-site B&I study for loans of $1 million to $10 million in the standard band of $6,900 to $12,500, delivered in roughly six to seven weeks, and loans above $10 million, phased plants or unusual processes in the complex band of $10,500 to $14,500 over seven to nine weeks. The fixed fee includes the five Part 5001 components, demand and competitor analysis, operator benchmarks, the management assessment and a financial workbook, plus revisions under the written acceptance guarantee. Engineering, environmental assessments, appraisal and detailed construction estimating are separate. Prepare the business plan, customer contracts or letters of intent, equipment quotes, the site and building plan, any term sheet from your bank and, for an existing company, three years of statements. More on the program is in the national USDA industrial feasibility study guide; to start, send your project details for a fixed-fee proposal, answered within one business day according to the contact page.
Program example
From the Wisconsin hub's precedent file: in 2022 USDA guaranteed a $10,000,000 B&I loan to Unified Science, LLC in St. Croix Falls. The hub lists it under manufacturing and records the purpose as business expansion; it is cited here as a Wisconsin B&I precedent at the upper end of the state's loan sizes, not as evidence for any particular product line. National program example (outside Wisconsin): the site's Alabama manufacturing case study walks through a supply-chain plant expansion under B&I.
Last updated 2026-11-08
USDA Feasibility, Inc.