Wyoming has 23 meat and poultry plants with paid staff, down from 30 in 2019, and they are small: 9.4 employees on average against 149.7 nationally, with no plant reaching 50. They are also scattered, with 17 of the 23 in counties that have only one or two. Yet Wyoming lenders have been more active here than in almost any other sector: its three meat processing 7(a) loans from FY2020 through FY2026 made up 1.4 percent of the national total, eight times its share of population. A USDA meat processing feasibility study in Wyoming has to explain that contrast. Ranchers want local processing, lenders have shown willingness, and plants have still closed, so the study must prove throughput, booking, inspection and labour for the specific plant before it goes to the USDA Rural Development state office serving Wyoming.
Meat processing in Wyoming: market evidence
Wyoming: meat and poultry processing, supply and rural footprint
| Measure | Wyoming | United States |
|---|---|---|
| Establishments, 2019 → 2023 | 30 → 23 (-23.3%) | 3,501 → 3,716 |
| Per 100,000 residents (2023) | 3.9 | 1.1 |
| Average employees per establishment | 9.4 | 149.7 |
| Average annual pay per employee | $34,401 | $50,981 |
| Share of establishments in non-metro counties | 50.0% (3 in 1 counties) | |
| Share of state population in non-metro counties (2025) | 68.8% |
Non-metro counties with the most meat and poultry processing (2023): Sheridan County (3).
Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.
What the record shows. Wyoming has 3.9 meat plants per 100,000 residents, 3.6 times the national density, but they are locker plants and custom processors, not packers. Payroll per plant is $324,565 against $7,630,719 nationally; in the size-class file, 10 of 23 plants have fewer than five employees and only three have 20 to 49. Pay averages $34,401, a third below the U.S. $50,981. The count fell by seven plants (23.3 percent) between 2019 and 2023 while the nation added 215, so the state is losing small processors even as producers seek more local capacity. A reviewer will challenge any projection that assumes a new plant will fill its kill floor quickly: the closures say that small Wyoming plants struggle with labour, seasonality and margins.
The rural share in the table is misleading on its face. The county file places only six plants, three in Sheridan County and three in Natrona County, because it publishes no county cell with fewer than three plants. The other 17 are spread across counties with one or two each, almost all of them non-metro. In practice nearly every Wyoming meat plant is a single local operation serving ranchers and hunters within its county and its neighbours.
Regional comparison
Montana's pack, labelled as Montana's, shows the opposite trend: plants rose 43.5 percent, from 46 to 66, with 9.9 employees each and pay of $37,980, close to Wyoming's profile. Seven Montana meat 7(a) loans between FY2020 and FY2026 averaged $1,232,600. South Dakota has 4.8 plants per 100,000 but averages 146.2 employees, because large packers sit alongside small lockers. Wyoming's plants resemble Montana's small processors, and Montana's recent expansion offers comparables for a study, provided they are labelled as out-of-state.
Demand, revenue and costs
Demand comes from livestock producers wanting animals processed, retail and restaurant buyers wanting local meat, and seasonal game processing. The study must decide which business model the plant follows: a fee-for-service plant charges a kill fee per head and a processing fee per pound, never owning the animal; a packer buys animals and sells product; many small plants mix the two. Revenue is head per week by species times fees or margins, plus retail sales. Costs are skilled labour, utilities (refrigeration runs year-round), packaging, rendering and waste disposal, inspection-related costs, insurance and maintenance. The capital budget covers the building, kill floor, coolers and freezers, cutting room, smokehouse, wastewater handling and rail or hoist systems.
Rural footprint and B&I eligibility in Wyoming
Nearly all Wyoming meat plants sit in small towns, and the B&I population test in 7 CFR 5001.3 excludes only two Wyoming cities, Cheyenne (66,507) and Casper (58,771), along with the urbanized land that adjoins each. The three plants the county file places in Natrona County are the exception that needs a parcel check; Sheridan (20,015) and every ranching town qualify on population. Excluded places are listed in the Wyoming state guide.
Program fit
B&I suits a plant expansion or new build where the building and equipment justify a 15- to 20-year term, and its 5001.105(d)(2) rule lowers equity to 10 percent for a new plant whose sales or processing contracts cover the debt for the life of the loan. Inspection status shapes everything: the national food processing page sets out the framework of federal FSIS inspection, state-inspected meat and poultry programmes run by state agriculture departments, and local environmental permitting, and the chosen route determines where the plant can sell. SBA 7(a) has been the main Wyoming route (ten loans since FY2010), with two 504 loans; 13 CFR 120.910 asks a start-up or special-purpose 504 borrower for 15 percent of project cost and one that is both for a fifth. REAP can fund refrigeration efficiency once the plant has 12 months of energy data. The lender checks owners over 20 percent under 5001.127(a) for debarment, overdue federal tax or debt, and unpaid federal judgments.
Financing benchmarks: USDA B&I next to SBA
Wyoming: SBA lending to meat and poultry processing
| Period | 7(a) loans | 7(a) dollars | 504 loans | 504 dollars |
|---|---|---|---|---|
| FY2010 to FY2016 | 5 | $1.4 million | 0 | $0 |
| FY2017 to FY2019 | 2 | $450,800 | 1 | $1.6 million |
| FY2020 to FY2023 | 0 | $0 | 1 | $243,000 |
| FY2024 to FY2026 | 3 | $1.8 million | 0 | $0 |
Average 7(a) loan, FY2020 to FY2026: $612,400. Average 504 loan: $243,000. Wyoming had fewer than 30 seasoned 7(a) loans for meat and poultry processing; nationally, 3.7% of 214 FY2010 to FY2016 loans were charged off, on average 72 months after approval.
Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).
| Term | B&I rule, fiscal 2026 | For a Wyoming meat plant |
|---|---|---|
| Guarantee | 85% below $5 million (91 FR 11272) | Any plant at Wyoming's scale |
| Upfront fee | 3.0% of the guaranteed amount; +0.50% if issued before completion | $63,750.00 on Loan B |
| Retention | 0.55% a year on the guaranteed share outstanding | $11,425.33 in year one on Loan B |
| Term | Useful life, up to 40 years, no balloon (5001.402) | Building 20 years; refrigeration and equipment shorter |
| Equity, new plant with processing or sales contracts | 10% (5001.105(d)(2)) | $277,777.78 on Loan B |
| Equity, new plant without them | 20% balance sheet or 25% of cost (5001.105(d)(4)) | $833,333.33 on Loan B |
| Equity, existing plant | 10% (5001.105(d)(1)) | $67,777.78 on Loan A |
| Study | New business over $1,000,000 (5001.306(a)(3)(i)) | Loan B |
Reading the financing record. A dozen SBA loans since FY2010 (ten 7(a), two 504), $5.4 million in total, is a substantial record for 23 plants, and Wyoming's five FY2010 to FY2016 7(a) loans show no charge-offs. Nationally the sector's seasoned loss rate is moderate, 3.7 percent of 214 loans, with losses coming late, around month 72. The recent Wyoming loans averaged $612,400, below the national $711,656, which fits expansions of existing lockers rather than new federally inspected plants. A new inspected plant in the $2 million to $3 million range would be larger than anything in Wyoming's SBA record and, as a new business borrowing over $1,000,000, would need the independent study.
Worked example (illustrative)
Loan A is $610,000, rounding Wyoming's FY2020 to FY2026 average meat processing 7(a) loan of $612,400 (three loans), over 15 years at an illustrative 7.75 percent. Loan B is an illustrative $2,500,000 new inspected plant over 20 years at 7.50 percent. Annual head counts are illustrative beef equivalents.
| Input or result | Loan A: Wyoming average | Loan B: new inspected plant (illustrative) |
|---|---|---|
| Loan amount | $610,000.00 | $2,500,000.00 |
| Guarantee percentage (fiscal 2026 tier) | 85% | 85% |
| Guaranteed amount | $518,500.00 | $2,125,000.00 |
| Upfront guarantee fee (3.0% of the guaranteed amount) | $15,555.00 | $63,750.00 |
| Upfront fee with the guarantee issued before construction is complete (3.5%) | $18,147.50 | $74,375.00 |
| Balance after 12 monthly payments | $587,588.65 | $2,443,920.32 |
| First annual retention fee (0.55% of the guaranteed share of that balance) | $2,746.98 | $11,425.33 |
| Interest rate (illustrative, fixed) | 7.75% | 7.50% |
| Amortization, years (no balloon) | 15 | 20 |
| Monthly payment | $5,741.78 | $20,139.83 |
| Annual debt service (NOI for 1.00x) | $68,901.39 | $241,677.96 |
| NOI for 1.25x coverage | $86,126.73 | $302,097.45 |
| Coverage at that NOI if the rate is 2 points higher | 1.11x | 1.08x |
| Coverage at that NOI if the term is 5 years shorter | 0.98x | 1.09x |
| Coverage if NOI comes in 10% below plan | 1.125x | 1.125x |
| Equity, new business, 25% of project cost (5001.105(d)(4)) | $203,333.33 | $833,333.33 |
| Total project cost on that basis | $813,333.33 | $3,333,333.33 |
| Equity, new business, 20% balance sheet route if this loan is the only debt | $152,500.00 | $625,000.00 |
| Equity, existing business, 10% of project cost (5001.105(d)(1)) | $67,777.78 | $277,777.78 |
| Independent feasibility study, new business (5001.306(a)(3)) | Agency discretion | required |
| Beef head per year (illustrative) | 1,200 | 5,000 |
| Debt service per head | $57.42 | $48.34 |
| NOI per head for 1.25x | $71.77 | $60.42 |
Per-head test. An expanded locker plant processing 1,200 beef head a year on Loan A carries $57.42 of debt service per head and needs $71.77 of net operating income per head for 1.25x coverage. A new plant processing 5,000 head on Loan B carries $48.34 per head and needs $60.42. Those per-head figures sit on top of labour, utilities, packaging and waste costs, so the study has to show kill and processing fees, or packer margins, high enough to clear them at realistic booking levels. If Loan A were amortized over 10 years instead of 15, coverage would drop to 0.98x. The plant's booking calendar matters as much as its capacity: fall harvest and hunting season can overload a small plant while spring leaves it idle.
Evidence a Wyoming meat plant study must build
With few comparable plants and none at scale in the state, the study must gather:
- Producer commitments: letters or contracts from ranchers stating head per year, species and months.
- Buyer commitments for any product the plant sells itself: retailers, restaurants, institutions.
- A booking calendar by month showing seasonal peaks and troughs, from producer surveys and nearby plants' waiting times.
- The inspection route (federal, state or custom-exempt) and the markets each allows, with the approval timeline.
- Labour: butchers and meat cutters available locally, their wages, and training plans.
- Waste and by-product handling: rendering service, offal disposal and wastewater capacity.
- Equipment and construction costs from vendors, with refrigeration loads.
- Existing plants' capacity and backlogs within hauling distance.
What can go wrong, and the mitigants
Labour is the risk that closes small plants: skilled cutters are scarce and a two-person absence can halt the line. Seasonality is extreme, with fall peaks and spring lulls. Rendering and waste disposal can be costly or unavailable in remote areas. Inspection compliance failures can stop operations. Livestock market cycles change producer demand. Mitigants are signed producer agreements spread across seasons, retail or game processing to fill slack months, a staffing and training plan, confirmed waste services, and working capital for the first year.
Lender path and the sponsor's documents
The lender confirms eligibility and loan structure, orders the study and appraisal, and then the B&I file goes to Rural Development for decision. Sponsors assemble producer and buyer letters, the inspection plan, building and equipment budgets, utility and waste-service letters, staffing plan, operating history for an existing plant, financial statements, and guarantees from each owner of 20 percent or more. Meat plant studies come back for throughput assumed rather than evidenced, missing seasonality, and unaddressed labour or waste constraints.
Program example
The inputs name no Wyoming meat plant financed by USDA. What exists is SBA's record: ten 7(a) and two 504 loans to Wyoming meat processors since FY2010.
Hiring a USDA meat processing feasibility study consultant in Wyoming
Part 5001 requires the feasibility study for a new meat processing business seeking a B&I guarantee above $1,000,000, prepared by an independent, qualified consultant acceptable to USDA (5001.306(a)(3)(i)). For an existing locker expanding with a smaller loan, the Agency decides. A meat processing feasibility study consultant must stand apart from the equipment, construction or the producer group's investment. The national food processing page, which lists meat and poultry as one of its categories, prices studies from $9,500 to $14,500 or more and schedules them over seven to nine weeks. The cost page lists what every engagement includes: the five Part 5001 components, primary market area and demand analysis, competitive supply, multi-year cash flow forecasts with downside cases, management assessment, and PDF, Word and Excel deliverables, with an acceptance guarantee; Phase I environmental work is separate.
Ask a prospective USDA feasibility study consultant how the study will convert producer interest into booked head per month, because that schedule decides coverage.
Send the location, species, planned capacity and inspection route through the contact page. A senior analyst picks up each inquiry within a business day, according to the page.
Last updated 2026-11-08
USDA Feasibility, Inc.