Maine had 1,700 manufacturing establishments in 2023, 121.3 for every 100,000 residents against 84.5 nationally, and it gained 28 plants between 2019 and 2023 while the U.S. count fell. Those plants are smaller and lower-paying than the national average, they are spread almost evenly between metro and non-metro counties, and their loan record is unusually clean: only 3.0 percent of Maine's seasoned manufacturing SBA 7(a) loans were charged off, against 6.4 percent nationally. That gives a B&I study for a Maine plant a favourable base to build on. Its work is to prove that this plant's customers, workforce and equipment will perform as the projections say.
This page covers the Maine data, how the rural test applies, B&I and SBA benchmarks, a worked example that splits a loan between building and equipment, and the points a lender-grade study must prove.
Manufacturing in Maine: market evidence
Maine: manufacturing establishments (all), supply and rural footprint
| Measure | Maine | United States |
|---|---|---|
| Establishments, 2019 → 2023 | 1,672 → 1,700 (+1.7%) | 287,626 → 284,452 |
| Per 100,000 residents (2023) | 121.3 | 84.5 |
| Average employees per establishment | 34.1 | 43.4 |
| Average annual pay per employee | $64,608 | $73,202 |
| Share of establishments in non-metro counties | 40.7% (691 in 11 counties) | |
| Share of state population in non-metro counties (2025) | 39.8% |
Non-metro counties with the most manufacturing establishments (all) (2023): Knox County (97); Kennebec County (93); Hancock County (85); Aroostook County (75); Somerset County (72); Lincoln County (65).
Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.
What the manufacturing numbers say. Maine is 44 percent more industrial per resident than the country, and the direction of travel is positive: a 1.7 percent gain in plants while the national count fell 1.1 percent. The plants are small. The average establishment employs 34.1 people against 43.4 nationally, with payroll of $2,203,765 against about $3,174,395, and pay per employee is $64,608, 11.7 percent below the U.S. $73,202. A pro forma can treat Maine wages as an advantage only if the plant can actually hire at them; in a tight rural labour market the study must show local applicant depth, commuting range and training capacity before it credits lower pay. Statewide, the Census counts 57,987 manufacturing employees, which gives a reviewer a scale for how significant a 40- or 100-job plant is in its county.
The category is broad. It includes food, wood products, paper, boatbuilding, machinery, electronics and every other sector coded 31 to 33, so the state average is a weak comparable for any single project. A study uses it to frame wages and plant size, then turns to the plant's own industry for margins, capacity and customer evidence.
Where Maine's manufacturers are
| County | OMB 2023 status | Count, 2023 | Residents, 2025 | Per 10,000 residents |
|---|---|---|---|---|
| Cumberland County | metro | 414 | 317,222 | 13.05 |
| York County | metro | 257 | 222,434 | 11.55 |
| Penobscot County | metro | 155 | 157,967 | 9.81 |
| Androscoggin County | metro | 145 | 116,487 | 12.45 |
| Knox County | not metro | 97 | 41,117 | 23.59 |
| Kennebec County | not metro | 93 | 129,067 | 7.21 |
| Hancock County | not metro | 85 | 57,171 | 14.87 |
| Aroostook County | not metro | 75 | 66,609 | 11.26 |
| Somerset County | not metro | 72 | 51,620 | 13.95 |
| Lincoln County | not metro | 65 | 36,595 | 17.76 |
| Oxford County | not metro | 57 | 60,346 | 9.45 |
| Waldo County | not metro | 57 | 40,693 | 14.01 |
| Washington County | not metro | 38 | 31,334 | 12.13 |
| Sagadahoc County | metro | 37 | 37,979 | 9.74 |
| Piscataquis County | not metro | 28 | 17,409 | 16.08 |
| Franklin County | not metro | 24 | 30,824 | 7.79 |
The county rows divide 2023 Census counts by Vintage 2025 populations and cover 1,699 of the 1,700 plants. Knox County stands out at 23.59 plants per 10,000 residents, nearly twice Cumberland's 13.05; Lincoln (17.76), Piscataquis (16.08), Hancock (14.87), Waldo (14.01) and Somerset (13.95) follow. The Maine state guide points to marine and resource-economy manufacturing, including boatbuilding, marine trades, forest-products machinery and food-processing equipment, and the coastal and forest counties with the highest densities are where those trades concentrate. Kennebec (7.21) and Franklin (7.79) have the lowest densities.
Demand, revenue and cost structure
A manufacturer's demand case is a customer case. Revenue is units times price by product line, supported by purchase orders, contracts, backlog and the customers' own demand. The key metrics are capacity and utilization, gross margin by line, customer concentration (the share of sales from the top one and top five customers), order backlog in months, and scrap or yield. Costs are materials, direct labour at Maine wage levels, energy, freight from a state at the end of the northeastern road network, maintenance and overhead. Capital items are land and building, machinery and installation, tooling, utility upgrades, and the working capital needed to carry inventory and receivables while production ramps up.
Rural footprint and B&I eligibility in Maine
Non-metro Maine, with 39.8 percent of the population, has 691 of the 1,700 plants, or 40.7 percent: 122.8 per 100,000 residents outside metro counties and 118.3 inside them. Knox (97), Kennebec (93), Hancock (85), Aroostook (75), Somerset (72) and Lincoln (65) top the pack's non-metro list.
The B&I definition in 7 CFR 5001.3 counts population at the latest decennial census and carves out two things only: any city or town over 50,000, and the urbanized area joined to it. Portland, at 68,408 in the 2020 Census, is Maine's only such city, so most of the metro counties' 1,008 plants are also on eligible ground. Lewiston-Auburn and Bangor screen as eligible because neither urbanized area contains a city over 50,000. The industrial parks of South Portland, Westbrook and the inner Portland ring need a USDA map check; Westbrook already hosts a 2024 B&I-guaranteed project. Because USDA cannot approve an application conditioned on resolving the location later, settle eligibility first. The Maine state guide has the screen.
Program fit for a Maine manufacturer
B&I is the main USDA tool for a manufacturing plant: land, buildings, machinery and equipment, and permanent working capital, up to $25 million per borrower. SBA 7(a) has carried most Maine manufacturing loans (444 since FY2010), at an average of $316,934 since FY2020, which is the size of an equipment purchase rather than a plant. SBA 504 suits owner-occupied buildings and long-life equipment. An operating plant can still add a REAP grant for efficiency or on-site generation; since the October 2026 rule the grant arrives only after a year of metered results and tops out at a quarter of cost. Forest-products plants have a further USDA route, the Timber Production Expansion program, used in Maine in 2026.
Maine also offers grant layers that change the equity math. The Northern Border Regional Commission designates nine Maine counties as distressed with a 20 percent match (Androscoggin, Aroostook, Franklin, Oxford, Penobscot, Piscataquis, Somerset, Waldo and Washington) and four as transitional with a 50 percent match; Cumberland, Sagadahoc and York are outside its region. The B&I reduced fee (1.0 percent, 0.50 percent retention, 80 percent guarantee) may be requested for a locally owned business producing a natural-resource value-added product or for projects in qualifying distressed communities, subject to USDA's annual cap. Owner screening under 5001.127 applies as well: delinquent federal taxes or debt, an outstanding federal judgment or a debarment at any owner above 20 percent bars the loan.
Financing benchmarks: USDA B&I next to SBA
Maine: SBA lending to manufacturing establishments (all)
| Period | 7(a) loans | 7(a) dollars | 504 loans | 504 dollars |
|---|---|---|---|---|
| FY2010 to FY2016 | 230 | $50.5 million | 30 | $11.1 million |
| FY2017 to FY2019 | 80 | $16.6 million | 17 | $13.7 million |
| FY2020 to FY2023 | 79 | $19.8 million | 24 | $8.0 million |
| FY2024 to FY2026 | 55 | $22.7 million | 5 | $5.7 million |
Average 7(a) loan, FY2020 to FY2026: $316,934. Average 504 loan: $471,724. Of the 230 7(a) loans approved in FY2010 to FY2016 for Maine manufacturing establishments (all), 3.0% were charged off (national: 6.4% of 27,078), on average 84 months after approval.
Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).
| Term | USDA B&I, fiscal 2026 | Source |
|---|---|---|
| Guarantee, loans under $5 million | 85% | 91 FR 11272 |
| Guarantee, $5 million to $25 million | 80% | 91 FR 11272 |
| Upfront guarantee fee | 3.0% of the guaranteed amount (plus 0.50% if the guarantee issues before construction is complete) | 91 FR 11272; 7 CFR 5001.454 |
| Annual retention fee | 0.55% of the guaranteed share of principal outstanding on 31 December | 91 FR 11272; 7 CFR 5001.455 |
| Reduced-fee tier (5001.454 criteria, annual cap) | 1.0% fee, 0.50% retention, 80% guarantee | 91 FR 11272 |
| Loan limit | $25 million per borrower | 7 CFR 5001.406(c) |
| Term | useful life of the collateral, 40 years at most, no balloon | 7 CFR 5001.402 |
| Rate | negotiated, fixed or variable, no higher than the lender's similar unguaranteed loans | 7 CFR 5001.401 |
| Equity, existing business | 10% balance sheet equity (or 9:1 debt to equity), or 10% of project cost | 7 CFR 5001.105(d)(1) |
| Equity, new business | 20% balance sheet equity (or 4:1), or 25% of project cost; 25% (or 3:1) if the guarantee issues before completion; 10% with qualifying sales contracts | 7 CFR 5001.105(d)(2)-(4) |
| Independent feasibility study | required above $1,000,000 for a new business; discretionary otherwise | 7 CFR 5001.306(a)(3) |
| SBA 7(a), for comparison | 85% guarantee up to $150,000, 75% above | 13 CFR 120.210 |
| SBA 504, for comparison | borrower injection 10%; 15% if new or single purpose; 20% if both | 13 CFR 120.910 |
Reading the plant lending record. The 7(a) record shows lending accelerating: 55 loans worth $22.7 million in FY2024 to FY2026, about $412,700 each, against 79 loans averaging about $250,600 in FY2020 to FY2023. Maine holds 0.65 percent of national manufacturing 7(a) loans since FY2020 and 0.60 percent of U.S. plants. The quality signal is strongest in the seasoned book: 7 of 230 FY2010 to FY2016 loans charged off, 3.0 percent against the national 6.4 percent, on average 84 months after approval. SBA reports 4,382 jobs supported by Maine manufacturing 7(a) loans since FY2010. USAspending shows only 4 B&I loans of any kind in Maine in FY2024 to FY2026, so B&I is underused here relative to the sector's size. A plant expansion of a few million dollars sits in the 85 percent tier; an established manufacturer meets 5001.105(d)(1) with a 10 percent stake, and a new company 25 percent of project cost unless it holds sales contracts that cover debt service, in which case (d)(2) allows 10 percent.
Worked example (illustrative)
Inputs: an existing Maine manufacturer borrows $3,500,000, split into a $2,200,000 building tranche amortized over 25 years and a $1,300,000 equipment tranche over 10 years, matching each to useful life as 5001.402 requires. Both carry an illustrative 7.25 percent fixed rate (5001.401). The project adds 40 jobs (illustrative). Retention fee uses balances after 12 payments. Computed in Python.
| Input or result | Building tranche | Equipment tranche | Combined loan |
|---|---|---|---|
| Amount | $2,200,000.00 | $1,300,000.00 | $3,500,000.00 |
| Amortization (useful life, 5001.402) | 25 years | 10 years | blended |
| Rate (illustrative, fixed) | 7.25% | 7.25% | 7.25% |
| Annual debt service | $190,821.01 | $183,145.62 | $373,966.64 |
| Guaranteed amount at 85% | $1,870,000.00 | $1,105,000.00 | $2,975,000.00 |
| Upfront fee, 3.0% of guaranteed | $89,250.00 | ||
| First retention fee, 0.55% of guaranteed balance after 12 payments | $15,781.43 | ||
| Cash flow for 1.25x coverage | $467,458.30 | ||
| Same loan on one 25-year schedule: debt service | $303,578.88 | ||
| Same loan on one 25-year schedule: cash flow for 1.25x | $379,473.60 | ||
| Jobs (illustrative) | 40 | ||
| Cash flow per job for 1.25x (split schedule) | $11,686.46 | ||
| Coverage if a top customer leaves and cash flow falls 30% | 0.87x | ||
| Existing-business equity, 10% of project cost (5001.105(d)(1)) | $388,888.89 | ||
| New-business equity, 25% of project cost (5001.105(d)(4)) | $1,166,666.67 |
What the split costs, and why it is still right. Matching the equipment to a 10-year life raises annual debt service to $373,966.64, $70,387.75 more than if the whole loan ran 25 years, and the plant needs $467,458.30 of cash flow for 1.25x coverage. A lender cannot simply stretch machinery to 25 years: B&I terms follow useful life with no balloon. The study must therefore show cash flow sized to the faster schedule, then show coverage improving sharply in year 11 when the equipment tranche is repaid. Spread over 40 new jobs, the coverage target is $11,686.46 of cash flow per job each year. If the largest customer leaves and cash flow falls 30 percent, coverage drops to 0.87x, which is why customer concentration is the first test in the list below. The guaranteed amount is $2,975,000 and the upfront fee $89,250. Equity is $388,888.89 for this existing business at 10 percent of project cost, against $1,166,666.67 if the same project were a new company without contracts.
What a lender-grade manufacturing feasibility study in Maine must prove
- Customers: who buys, under what contracts or purchase orders, and the share of sales from the top one and top five buyers.
- Order backlog and pipeline, in months of production, for each product line.
- Capacity and utilization: what the new equipment adds and how fast it reaches planned throughput.
- Workforce: applicants within commuting range, skills, training, and wages compared with Maine's $64,608 average.
- Margins by product line, built from quotes and history rather than industry averages for all of sector 31 to 33.
- Freight and energy costs from the actual site, including the cost of reaching customers outside New England.
- Working capital for inventory and receivables during ramp-up, with the quarterly cash flow 5001.202 requires through start-up.
- Equipment schedules matched to useful life, and the coverage path once short-lived tranches retire.
- Eligibility and grant layers: the 5001.3 answer, NBRC designation of the county, and any reduced-fee criterion claimed.
- Management depth: who runs operations, sales and finance, and the succession plan in a closely held firm.
Risks and mitigants in Maine
Customer concentration and labour supply are the risks that most often sink a small-plant projection. Mitigants are contracts with take-or-pay or minimum terms, letters from second-tier customers, a training partnership, and a ramp-up schedule that does not assume full staffing in month one. Energy cost and grid reliability matter for heavy users. Equipment collateral is discounted steeply; under 5001.203 any real estate appraisal must strip out going-concern value before USDA's discount and be less than a year old at closing. For loans over $1,000,000 that create more than 50 jobs, 5001.306(a)(1) adds a Department of Labor concurrence step, which belongs in the timeline.
Process and documents
Application and study go together to the Bangor state office. Because ten OneRD lenders lost or failed to renew their approved status in May 2026, according to the Maine guide, check the bank's standing before the engagement letter is signed. The sponsor supplies three years of financial statements and interim figures, customer lists and contracts, backlog reports, equipment quotes, the construction budget, organisation chart, personal financial statements and the 5001.204 guarantees. Plant studies are returned when sales growth departs from history without support (5001.202 requires substantiation), when the largest customer is undocumented, or when the equipment term exceeds its life.
Program example
Two Maine precedents in the state guide's list involve production facilities, labelled here by program. B&I: Vertical Harvest Farms received a $25,000,000 B&I guarantee in 2024 for a hydroponic vertical farm in Westbrook, layered with REAP, C-PACE and FAME-channelled funds. Timber Production Expansion (a separate USDA guarantee, not B&I): Maine Plywood USA in Bingham received $11,900,000 in 2026 to convert a sawmill to plywood underlayment, with 95 expected jobs. Neither is a general manufacturing plant, but both show USDA guarantees closing in Maine at manufacturing scale. National program example (outside Maine): the site's Alabama case study of a supply-chain plant expansion under B&I.
Hiring a USDA manufacturing feasibility study consultant in Maine
A start-up manufacturer asking for more than $1,000,000 of guaranteed credit must file a study from an outside consultant USDA accepts, on a scope USDA sets (5001.306(a)(3)(i)). For an existing manufacturer like the one in the example, the Agency may still require a study, particularly when the project will significantly change the borrower's operations and historic cash flow (5001.306(a)(3)(ii)). Engage a USDA feasibility study consultant that is independent of the equipment vendors, contractor and lender, that can test customer and backlog evidence, and that structures the report around Part 5001's economic, market, technical, financial and management components.
The cost page quotes standard B&I work at $6,900 to $12,500 on a six-to-seven-week schedule; loans above $10 million, multi-site or phased plants and unusual asset classes fall in the complex band of $10,500 to $14,500 over seven to nine weeks, and cross-program structures (for example B&I with REAP and grants) can reach $9,500 to $18,000. Engineering, environmental assessments, appraisals and detailed construction estimates are separate engagements.
Ask for a fixed-fee proposal for your Maine plant. Include location, products, loan size and lender; a senior analyst will get back to you inside one business day.
Last updated 2026-11-08
USDA Feasibility, Inc.