USDA Feasibility Study for Food and Beverage Processing in New Hampshire

    NAICS 311

    New Hampshire's food manufacturing base, excluding meat, grew from 108 plants in 2019 to 127 in 2023, an increase of 17.6 percent that beat the national 11.5 percent. The plants are small, averaging 23.2 employees against 42.0 nationally, and well paid, at $63,859 per employee. That profile fits specialty, artisan and contract producers rather than large commodity plants, and it shapes what a lender needs from a feasibility study: proof of sales channels and customers for a small producer scaling up, realistic yields and margins, and a capital plan that matches equipment life to loan term.

    The figures below cover New Hampshire food plants by county, the SBA record (which shows no seasoned losses in the state), B&I terms, two worked loans, and the evidence USDA Rural Development's reviewers will ask the study to supply.

    Food processing in New Hampshire: market evidence

    New Hampshire: food manufacturing (excluding meat), supply and rural footprint

    MeasureNew HampshireUnited States
    Establishments, 2019 → 2023108 → 127 (+17.6%)24,589 → 27,414
    Per 100,000 residents (2023)9.18.1
    Average employees per establishment23.242.0
    Average annual pay per employee$63,859$58,248
    Share of establishments in non-metro counties37.1% (49 in 6 counties)
    Share of state population in non-metro counties (2025)36.9%

    Non-metro counties with the most food manufacturing (excluding meat) (2023): Merrimack County (15); Cheshire County (13); Belknap County (8); Grafton County (5); Sullivan County (5); Carroll County (3).

    Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.

    Interpreting the food plant figures. At 9.1 plants per 100,000 residents New Hampshire is 11 percent above the national density, and it added 19 plants in four years. Small plants dominate: the average payroll is $1,479,819 per plant against $2,445,810 nationally, while pay per employee is 9.6 percent higher than the U.S. average of $58,248. For a pro forma this means higher labour cost per unit than a large commodity plant would carry, offset only if the product earns a premium price. A reviewer will challenge any projection that combines New Hampshire wages with commodity pricing, and will ask how a plant of two dozen people reaches the volume its equipment can produce. The fast growth since 2019 also means newer competitors in specialty categories, which the study must find by name.

    Food plants by county

    CountyOMB 2023 statusFood plants, 2023Residents, 2025Per 10,000 residents
    Rockingham Countymetro41324,0771.27
    Hillsborough Countymetro31433,4150.72
    Merrimack Countynot metro15158,0780.95
    Cheshire Countynot metro1378,2691.66
    Strafford Countymetro11135,0430.81
    Belknap Countynot metro865,1471.23
    Grafton Countynot metro593,2250.54
    Sullivan Countynot metro543,9611.14
    Carroll Countynot metro352,7840.57
    Coos Countynot metro031,3430.00

    Rockingham County has the most food plants (41) and the second-highest density (1.27 per 10,000 residents), behind Cheshire at 1.66. Hillsborough has 31. Coos County records none. These county cells add up to 132, five more than the state's 127, because the county file cannot strip out meat plants that the state total excludes; treat the county figures as food and meat combined.

    Markets, operations and costs

    Demand evidence for a food processor is sales channels: distributor agreements, retail slotting commitments, co-packing contracts, food-service accounts and direct-to-consumer volumes, each with price and volume. The operations case covers raw material supply (often farm inputs, with seasonal availability), batch or line capacity, yields, shelf life, packaging and cold chain. Revenue is cases or pounds by product times net price after distributor margins, slotting fees and promotions. Costs are ingredients, packaging, labour, energy, sanitation, freight, insurance and food safety compliance. Capital items are building and process equipment, refrigeration, packaging lines, wastewater treatment where needed, and working capital for inventory and receivables.

    Rural footprint and B&I eligibility in New Hampshire

    Food plants are distributed in line with population: 49 of the 132 plants placed by county, 37.1 percent, are in non-metro counties against 36.9 percent of residents, for 9.4 plants per 100,000 non-metro residents and 9.3 in the metro counties. Merrimack (15), Cheshire (13), Belknap (8), Grafton (5), Sullivan (5) and Carroll (3) are the non-metro counties with plants.

    USDA's rural test in 7 CFR 5001.3 is applied at the site. A plant is ineligible inside a city or town of over 50,000 residents or inside the urbanized area adjoining it; New Hampshire's two such cities are Manchester, population 116,818, and Nashua, 92,435. Concord has 44,597. That leaves room for many of Rockingham County's 41 plants and Strafford's 11, which sit in metro counties but in towns well below 50,000, while plants inside Manchester or Nashua are excluded. The New Hampshire hub lists places near the threshold, and the site's eligibility map is the place to check a parcel.

    Program fit for a New Hampshire food processor

    B&I fits a food processor buying or building a plant, adding lines, acquiring a competitor, or funding working capital for growth. SBA has been the more common tool in the state, with 71 7(a) and 15 504 loans since FY2010; the 7(a) loans have been small, averaging $157,819 since FY2020, which suits equipment rather than plants. For a producer-owned business adding value to its own farm products, the USDA Value-Added Producer Grant may fund planning or working capital, and the site prices VAPG studies separately. REAP can fund efficient refrigeration, heat recovery or solar at an operating plant, with the grant paid after 12 months of data. Community Facilities does not fund private processors, though a food hub owned by a public body or non-profit may be a different question.

    Financing benchmarks: USDA B&I next to SBA

    New Hampshire: SBA lending to food manufacturing (excluding meat)

    Period7(a) loans7(a) dollars504 loans504 dollars
    FY2010 to FY201632$3.1 million8$2.1 million
    FY2017 to FY201912$989,3001$700,000
    FY2020 to FY202315$3.3 million4$1.7 million
    FY2024 to FY202612$918,6002$3.7 million

    Average 7(a) loan, FY2020 to FY2026: $157,819. Average 504 loan: $900,500. Of the 32 7(a) loans approved in FY2010 to FY2016 for New Hampshire food manufacturing (excluding meat), 0.0% were charged off (national: 7.4% of 3,150).

    Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).

    TermUSDA B&I, fiscal 2026Source
    Guarantee, loans under $5 million85%91 FR 11272
    Guarantee, $5 million to $25 million80%91 FR 11272
    Upfront guarantee fee3.0% of the guaranteed amount91 FR 11272; 7 CFR 5001.454
    Annual retention fee0.55% of the guaranteed share of principal outstanding on December 3191 FR 11272; 7 CFR 5001.455
    Reduced-fee loans (criteria in 5001.454)1.0% fee, 0.50% retention, 80% guarantee91 FR 11272
    Guarantee issued before construction is completeadditional 0.50% fee91 FR 11272; 7 CFR 5001.454
    Maximum loan per borrower$25 million7 CFR 5001.406(c)
    Termuseful life of the collateral, 40 years at most, no balloon7 CFR 5001.402
    Interest ratenegotiated, fixed or variable, no higher than the lender's similar non-guaranteed loans7 CFR 5001.401
    Equity, existing business10% balance sheet equity (or debt to equity of 9:1), or 10% of project cost7 CFR 5001.105(d)(1)
    Equity, new business20% balance sheet equity (or 4:1), or 25% of project cost; 25% (or 3:1) when the guarantee issues before construction is complete7 CFR 5001.105(d)(3), (d)(4)
    Independent feasibility studyrequired above $1,000,000 for a new business; at the Agency's discretion otherwise7 CFR 5001.306(a)(3)
    SBA 7(a), for comparison85% guarantee up to $150,000, 75% above13 CFR 120.210
    SBA 504, for comparisonborrower injection 10%; 15% if new or single purpose; 20% if both13 CFR 120.910

    How the lending record reads. New Hampshire has produced 86 food manufacturing SBA loans since FY2010, 0.99 percent of the national total, so lenders here have financed small processors steadily. The seasoned record is clean: none of the 32 7(a) loans from FY2010 to FY2016 was charged off, against 7.4 percent of 3,150 nationally. The pack JSON does show one charge-off already recorded among the 15 loans of FY2020 to FY2023, a reminder that the clean early record does not guarantee the next. Average loan sizes are small ($98,247 in FY2010 to FY2016, $76,550 in FY2024 to FY2026), so a plant investment large enough for B&I will be larger than anything in the state's recent SBA history, and the study has to stand on the project's own evidence. Rural Development recorded no B&I loans in New Hampshire for FY2024 to FY2026 in USAspending, whose counts may be incomplete.

    Worked example (illustrative)

    Loan A, $160,000, is the state's FY2020 to FY2026 average food manufacturing 7(a) loan rounded. Loan B, $3,000,000, is an illustrative new production facility for a growing specialty brand. Both use an illustrative 7.25 percent fixed rate (5001.401) and 15-year amortization (5001.402), reflecting a mix of building and process equipment.

    Input or resultLoan A (state average)Loan B (illustrative plant)
    Loan amount$160,000.00$3,000,000.00
    Guarantee percentage (fiscal 2026 tier)85%85%
    Guaranteed amount$136,000.00$2,550,000.00
    Unguaranteed amount (lender's own risk)$24,000.00$450,000.00
    Upfront guarantee fee (3.0% of the guaranteed amount)$4,080.00$76,500.00
    Upfront fee if the guarantee issues before construction is complete (3.5%)$4,760.00$89,250.00
    First annual retention fee (0.55% of the guaranteed share of the balance after 12 payments)$719.35$13,487.85
    Interest rate (illustrative, fixed)7.25%7.25%
    Amortization (years, no balloon)1515
    Monthly payment$1,460.58$27,385.89
    Annual debt service (NOI at 1.00x)$17,526.97$328,630.64
    NOI needed for 1.25x coverage$21,908.71$410,788.30
    Coverage at that NOI if the rate is 2 points higher1.11x1.11x
    Coverage at that NOI if amortization is 5 years shorter0.97x0.97x
    New business equity, 25% of project cost (5001.105(d)(4))$53,333.33$1,000,000.00
    Total project cost on that basis$213,333.33$4,000,000.00
    New business equity, 20% balance sheet route if this loan is the only liability$40,000.00$750,000.00
    Existing business equity, 10% of project cost (5001.105(d)(1))$17,777.78$333,333.33
    Independent feasibility studyAgency discretion; streamlined application at $600,000 or less (5001.306(a)(3)(ii), (b))required for a new business (5001.306(a)(3)(i))

    Term length and income per worker. Food plants are equipment-heavy, and 5001.402 limits the term to the useful life of the collateral. If a lender holds Loan B to 10 years because most of the collateral is process equipment, the same net operating income of $410,788.30 covers debt service only 0.97 times; the plant would need more income or a longer blended term. A two-point rate increase at 15 years leaves 1.11x. For a plant of the state's average size, 23.2 employees, Loan B's 1.25x target is $17,706.39 of net operating income per employee, or 27.8 percent of the average New Hampshire plant's payroll of $1,479,819. A new company needs $1,000,000.00 of cash on a $4,000,000.00 project under the 25 percent test, or 20 percent balance sheet equity, $750,000.00 if this loan is its only liability.

    What a lender-grade food processing feasibility study in New Hampshire must prove

    1. Signed or credible sales channels: distributor, retail, food-service or co-packing agreements with prices and volumes.
    2. Raw material supply and its seasonality, including farm sourcing and the cost of storing inputs.
    3. Line capacity, yields and shelf life tested against the volumes the projections need.
    4. Net pricing after distributor margins, slotting and promotion costs, not list price.
    5. Labour at New Hampshire wages ($63,859 per employee on average) for a plant of realistic size.
    6. Food safety registration and licensing, sanitation and wastewater requirements, with their costs.
    7. Working capital for inventory and receivables through the first 12 to 24 months.
    8. A competitive review of specialty producers in the category, given 19 new plants in the state since 2019.
    9. Parcel eligibility under 5001.3, especially for sites near Manchester and Nashua.

    Risks and mitigants in New Hampshire

    The leading risk for a small processor is sales falling short of capacity while fixed costs and debt service run; contracts, a phased build and a conservative ramp-up mitigate it. Input cost spikes and supply shortfalls hit margins, so the study should test a bad harvest or a price increase on key ingredients. A recall or food safety failure can halt sales, so insurance and a documented food safety plan matter. Labour scarcity can keep a line from running a second shift. Collateral is partly specialised equipment, which 5001.203 appraisals value conservatively, so lenders look for real estate or other support.

    Process, documents and what gets a study returned

    The study goes into the lender's B&I application and is read by Rural Development's New Hampshire staff before any conditional commitment. A processor should provide historical statements, sales by channel and customer, letters of intent or contracts, supplier agreements, equipment quotes, the building budget, food safety documentation, personal financial statements and owner guarantees. Common reasons for return are projections built from capacity rather than sales, gross prices that ignore channel costs, missing working capital, and no evidence for new customers.

    Program example

    The inputs show no New Hampshire food processor financed under B&I. National program example (outside New Hampshire): the site's case studies cover a cheese plant capacity project in Wisconsin financed with USDA support, linked below as an example of how a dairy processor's study is built.

    Hiring a USDA food processing feasibility study consultant in New Hampshire

    A study is compulsory under 5001.306(a)(3)(i) when a new business seeks a B&I guaranteed loan larger than $1,000,000: an independent, qualified author acceptable to USDA writes it, to a scope USDA sets. A processor that is already operating, or a loan of $1,000,000 or less, is in the Agency's discretion under 5001.306(a)(3)(ii), although a plant that more than doubles a small producer's output will usually be asked for one. A good USDA feasibility study consultant for food processing tests sales channels and plant capacity together, and has no stake in the equipment order.

    The site's cost page explains that value-added food processing often needs primary research, because comparable operators must be contacted directly for prices and operating data, and that this extends the timeline and the fee. A standard B&I study is fixed at $6,900 to $12,500 over six to seven weeks; a complex one, with limited comparable data, $10,500 to $14,500 over seven to nine weeks; a VAPG planning study starts at $4,900. The fee is fixed in a written proposal and does not rise unless the scope materially changes, for example by adding a second site or program. Processors should prepare sales records, customer letters and equipment quotes before kickoff.

    Scope a food processing study through the contact page, which asks for the location, program, cost range and lender status and promises a reply from a senior analyst within one business day.

    Last updated 2026-11-08

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    Is a feasibility study required for a food processing loan in New Hampshire?

    It is required when a newly formed food company borrows more than $1,000,000 under a B&I guarantee (7 CFR 5001.306(a)(3)(i)). Most New Hampshire food processing SBA loans have been far smaller, averaging $157,819 since FY2020, so a B&I-sized plant investment is a step change and the lender will usually want a study even for an existing producer, under the Agency's discretion in 5001.306(a)(3)(ii).

    What does a food processing feasibility study consultant cost?

    Expect the cost page's standard B&I range, $6,900 to $12,500, for a single plant with workable comparables, and $10,500 to $14,500 where comparable processors are few and have to be interviewed directly, which is common for specialty foods. A VAPG planning study for a producer-owned business is priced from $4,900. The quote is a fixed fee in the written proposal.

    How long does a food processing feasibility study take?

    A standard B&I study runs six to seven weeks on the site's schedule, and a complex one seven to nine. Food projects slide toward the longer end when buyers, distributors and comparable producers have to be contacted for prices and volumes. A rush schedule of three to four weeks is available for a 20 to 35 percent premium, subject to capacity.

    Who can prepare a USDA food processing feasibility study?

    An independent consultant qualified in food manufacturing markets and acceptable to USDA, with no interest in the borrower, its customers, the equipment supplier or the lender. A distributor's letter or a buyer's commitment is evidence the study relies on, not a replacement for it. USDA does not certify consultants; the state office decides acceptability when it reviews the file.

    How long is a food processing feasibility study valid?

    Nothing in Part 5001 sets a shelf life. Lenders work to the cost page's guide of market data within about 18 months, and appraisals must be under a year old at closing. Food prices and customer commitments move faster than that; if a retail account, distributor or key ingredient price changes before closing, update the projections.

    Can one food processing study serve both SBA and USDA?

    Yes, if it is written to the Part 5001 standard. SBA may require a study (13 CFR 120.160(b)), and New Hampshire processors used 27 7(a) and 6 504 loans from FY2020 to FY2026, so an SBA alternative is often on the table. Keep one model, list both lenders, and note that SBA files generally expect data within 12 months.

    Why are New Hampshire food plants so small, and does it matter to USDA?

    The state's food plants average 23.2 employees, about half the national 42.0, reflecting specialty and artisan producers. It matters because small plants have less margin for error: a lost account or a bad harvest affects a larger share of revenue. A study should show customer diversification, realistic ramp-up and enough working capital, and USDA may require more equity for a higher-risk profile under 5001.105(d)(5).

    Can a farm-owned processing business use B&I or VAPG?

    Both can apply. B&I serves for-profit businesses of any ownership on eligible rural sites. VAPG is a USDA grant for agricultural producers adding value to their own products, and the site's cost page prices VAPG planning and working capital studies from $4,900 and $6,500. A producer planning a plant can use a VAPG study for the grant and a B&I study for the plant loan; the two should share data.

    What happens if the lender insists on a shorter term for process equipment?

    Coverage falls. In the worked example, Loan B covers debt service 1.25 times over 15 years, but only 0.97 times over 10 years at the same income. 5001.402 ties the term to the useful life of the collateral, so a study should include an equipment-life schedule that supports the requested term, or the projections must show enough income for the shorter one.

    Sources

    1. U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files: https://www2.census.gov/programs-surveys/cbp/datasets/
    2. U.S. Census Bureau, Vintage 2025 population estimates (state, county and incorporated places): https://www2.census.gov/programs-surveys/popest/datasets/2020-2025/
    3. Office of Management and Budget, metropolitan and micropolitan delineation, July 2023: https://www2.census.gov/programs-surveys/metro-micro/geographies/reference-files/2023/delineation-files/list1_2023.xlsx
    4. U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: https://data.sba.gov/dataset/7-a-504-foia
    5. 7 CFR Part 5001, OneRD Guaranteed Loanmaking and Servicing, CFR 2026 edition (govinfo): https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml
    6. 91 FR 11272, OneRD annual notice of guarantee fee rates, retention fee rates and guarantee percentages for FY2026 (govinfo): https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm
    7. 90 FR 57351, OneRD guaranteed loan regulation technical amendments, December 11, 2025 (govinfo): https://www.govinfo.gov/content/pkg/FR-2025-12-11/html/2025-22567.htm
    8. 13 CFR Part 120, SBA business loan programs: https://www.ecfr.gov/current/title-13/chapter-I/part-120
    9. USAspending.gov prime award data, Assistance Listings 10.768, 10.766 and 10.868, New Hampshire, FY2024 to FY2026: https://www.usaspending.gov/search
    10. Site cost and timeline page: /usda-feasibility-study-cost; contact page: /contact

    Data current as of November 2026.

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours