USDA Feasibility Study for Meat and Poultry Processing in New Hampshire

    NAICS 3116

    New Hampshire has six meat and poultry processing plants with paid employees, one fewer than in 2019, at a density of 0.4 per 100,000 residents against 1.1 nationally. They are small, averaging 30.3 employees against 149.7 for the industry nationally. Livestock and poultry producers in a state with so few plants often travel to neighbouring states for slaughter slots, and that is the opportunity a new or expanded plant claims. It is also the evidence problem: there are almost no local comparables, the Census county file publishes no plant locations, and SBA's file shows only 13 loans in 17 years. A lender-ready study for a New Hampshire meat plant has to prove livestock supply and producer commitments directly, set out inspection status and capacity, and show that a small plant's margins carry its debt.

    Below: what six plants can and cannot tell a lender, how Vermont, Maine and Massachusetts compare, national loan and loss benchmarks, guarantee terms, two worked loans, and the field evidence that replaces missing statistics.

    Meat processing in New Hampshire: market evidence

    New Hampshire: meat and poultry processing, supply and rural footprint

    MeasureNew HampshireUnited States
    Establishments, 2019 → 20237 → 6 (-14.3%)3,501 → 3,716
    Per 100,000 residents (2023)0.41.1
    Average employees per establishment30.3149.7
    Average annual pay per employee$57,247$50,981
    Share of state population in non-metro counties (2025)36.9%

    Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.

    What six plants mean for a lender. New Hampshire has about 39 percent of the national plant density, and its count fell while the nation's rose 6.1 percent. With 182 employees across six plants and payroll of $10,419,000, the average plant pays $1,736,500 a year, about a quarter of the national $7,630,719, so these are small regional and custom operations rather than packing plants. Pay per employee, $57,247, is 12.3 percent above the national $50,981, which raises cost per head for any New Hampshire plant. The county file publishes no meat plant counts, so the non-metro share cannot be measured. For a lender, the takeaway is that a new plant's economics must be built from its own projected throughput and price, tested against regional and national data, rather than from local operating comparables.

    Regional comparison (neighbouring states' figures)

    Measure, 2023New HampshireVermontMaineMassachusetts
    Meat and poultry plants with paid staff6171634
    Change since 2019-1+4-1+6
    Density per 100k residents0.42.61.10.5
    Average employees each30.319.78.194.4
    Average pay per employee$57,247$51,710$30,085$70,244
    SBA 7(a) loans, fiscal 2010 to 202610521
    SBA 504 loans, fiscal 2010 to 20263100

    The neighbouring columns are the other states' own pack figures. Vermont, with 17 plants and 2.6 per 100,000 residents, has more than six times New Hampshire's density and added four plants since 2019; it is both the main regional comparable and a competitor for New Hampshire livestock. Maine's 16 plants average only 8.1 staff. New Hampshire, despite having the fewest plants, has the longest SBA record of the four, 13 loans, 2.15 percent of the 606 meat processing SBA loans nationally.

    National benchmarks

    SBA made 213 7(a) loans to meat and poultry processors nationally in FY2020 to FY2026, averaging $711,656, and 38 504 loans averaging $1,604,316. Seasoned losses were moderate: 3.7 percent of the 214 national loans from FY2010 to FY2016, usually about six years in. Those national figures, not New Hampshire's three recent 7(a) loans averaging $79,167, are what a reviewer will use.

    The evidence a meat plant study must build

    • Producer commitments. Letters or contracts from livestock and poultry producers for slaughter or processing slots by species, with head per week and season.
    • Waiting times. Current booking lead times at plants producers now use, in New Hampshire and neighbouring states.
    • Livestock supply. Animal numbers within the haul radius, from producer surveys and agricultural statistics the study obtains.
    • Buyers. Retailers, restaurants, distributors and direct-to-consumer channels for the plant's own products, if it sells under its own label.
    • By-products and waste. Rendering, hide and offal outlets and their cost, and wastewater treatment capacity.
    • Inspection path. Federal inspection or custom-exempt status, and the timeline and cost of obtaining a grant of inspection.

    Rural footprint and B&I eligibility in New Hampshire

    Without county data, the plants' rural share is unknown; non-metro counties hold 36.9 percent of New Hampshire residents. Under 7 CFR 5001.3 the B&I rural area excludes cities and towns of more than 50,000 people and their contiguous urbanized areas, which in New Hampshire means Manchester (116,818) and Nashua (92,435). Concord (44,597) is below the threshold. A slaughter plant will rarely be sited in those cities, so eligibility is seldom the obstacle, but the parcel still needs confirming. The New Hampshire state page lists the places near the line.

    Program fit for a New Hampshire meat plant

    Plant construction, expansion, equipment, acquisition and working capital are all B&I purposes, guaranteed at 85 percent below $5 million. The site's national meat processing page compares B&I with USDA's dedicated processor programs and explains when each fits. SBA has financed New Hampshire processors at small scale: 10 7(a) and 3 504 loans since FY2010, none in FY2024 to FY2026. REAP can fund refrigeration efficiency, heat recovery or solar at an operating plant, with grants of at most 25 percent of cost paid after 12 months of data under the rule effective 16 October 2026. A producer-owned plant processing its members' animals may also look at Value-Added Producer Grants. Part 5001 screens projects that would add capacity to an oversupplied market or move jobs from another location; with six plants and producers seeking slots, the New Hampshire case usually points the other way, but the study should show it.

    Financing benchmarks: USDA B&I next to SBA

    New Hampshire: SBA lending to meat and poultry processing

    Period7(a) loans7(a) dollars504 loans504 dollars
    FY2010 to FY20166$2.4 million3$484,000
    FY2017 to FY20191$38,0000$0
    FY2020 to FY20233$237,5000$0
    FY2024 to FY20260$00$0

    Average 7(a) loan, FY2020 to FY2026: $79,167. New Hampshire had fewer than 30 seasoned 7(a) loans for meat and poultry processing; nationally, 3.7% of 214 FY2010 to FY2016 loans were charged off, on average 72 months after approval.

    Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).

    TermUSDA B&I, fiscal 2026Source
    Guarantee, loans under $5 million85%91 FR 11272
    Guarantee, $5 million to $25 million80%91 FR 11272
    Upfront guarantee fee3.0% of the guaranteed amount91 FR 11272; 7 CFR 5001.454
    Annual retention fee0.55% of the guaranteed share of principal outstanding on December 3191 FR 11272; 7 CFR 5001.455
    Reduced-fee loans (criteria in 5001.454)1.0% fee, 0.50% retention, 80% guarantee91 FR 11272
    Guarantee issued before construction is completeadditional 0.50% fee91 FR 11272; 7 CFR 5001.454
    Maximum loan per borrower$25 million7 CFR 5001.406(c)
    Termuseful life of the collateral, 40 years at most, no balloon7 CFR 5001.402
    Interest ratenegotiated, fixed or variable, no higher than the lender's similar non-guaranteed loans7 CFR 5001.401
    Equity, existing business10% balance sheet equity (or debt to equity of 9:1), or 10% of project cost7 CFR 5001.105(d)(1)
    Equity, new business20% balance sheet equity (or 4:1), or 25% of project cost; 25% (or 3:1) when the guarantee issues before construction is complete7 CFR 5001.105(d)(3), (d)(4)
    Independent feasibility studyrequired above $1,000,000 for a new business; at the Agency's discretion otherwise7 CFR 5001.306(a)(3)
    SBA 7(a), for comparison85% guarantee up to $150,000, 75% above13 CFR 120.210
    SBA 504, for comparisonborrower injection 10%; 15% if new or single purpose; 20% if both13 CFR 120.910

    What the lending record means. New Hampshire's 13 SBA loans total $3.19 million, with 7(a) loans averaging $405,167 in FY2010 to FY2016 but only $79,167 in FY2020 to FY2023 and none since. That pattern fits small equipment loans to existing plants, not plant construction. A new plant or significant expansion will be larger than anything in the state's recent SBA history and will be judged against national data. And with no New Hampshire B&I loans recorded by USAspending for three years, there is no in-state program precedent either, assuming the file is complete.

    Worked example (illustrative)

    Loan A, $710,000, rounds the national FY2020 to FY2026 average meat processing 7(a) loan. Loan B, $2,500,000, is an illustrative new multi-species plant with a cut-and-wrap room and cooler space. Each is priced at an illustrative fixed 7.25 percent (5001.401) and amortized over 20 years (5001.402), because a kill floor's equipment ages faster than its building.

    Input or resultLoan A (national average)Loan B (illustrative new plant)
    Loan amount$710,000.00$2,500,000.00
    Guarantee percentage (fiscal 2026 tier)85%85%
    Guaranteed amount$603,500.00$2,125,000.00
    Unguaranteed amount (lender's own risk)$106,500.00$375,000.00
    Upfront guarantee fee (3.0% of the guaranteed amount)$18,105.00$63,750.00
    Upfront fee if the guarantee issues before construction is complete (3.5%)$21,122.50$74,375.00
    First annual retention fee (0.55% of the guaranteed share of the balance after 12 payments)$3,242.57$11,417.49
    Interest rate (illustrative, fixed)7.25%7.25%
    Amortization (years, no balloon)2020
    Monthly payment$5,611.67$19,759.40
    Annual debt service (NOI at 1.00x)$67,340.03$237,112.80
    NOI needed for 1.25x coverage$84,175.04$296,390.99
    Coverage at that NOI if the rate is 2 points higher1.08x1.08x
    Coverage at that NOI if amortization is 5 years shorter1.08x1.08x
    New business equity, 25% of project cost (5001.105(d)(4))$236,666.67$833,333.33
    Total project cost on that basis$946,666.67$3,333,333.33
    New business equity, 20% balance sheet route if this loan is the only liability$177,500.00$625,000.00
    Existing business equity, 10% of project cost (5001.105(d)(1))$78,888.89$277,777.78
    Independent feasibility studyAgency discretion (5001.306(a)(3)(ii))required for a new business (5001.306(a)(3)(i))

    Per-week and per-head targets. Over 50 operating weeks, Loan B's 1.25x target of $296,390.99 means $5,927.82 of net operating income a week, of which $4,742.26 pays debt service. At an illustrative 40 beef-equivalent head a week, 2,000 a year, that is $148.20 of net operating income per head. Loan A at an illustrative 1,500 head a year needs $56.12 per head. Set against payroll, Loan B's target is 17.1 percent of what an average New Hampshire plant pays its staff in a year. A two-point rate rise, or a 15-year term, leaves coverage at 1.08x. A new plant company needs $833,333.33 of equity on a $3,333,333.33 project under the 25 percent test; with producer contracts covering debt service for the loan term, 5001.105(d)(2) lowers that to 10 percent. Throughput figures are illustrative.

    What a lender-grade meat processing feasibility study in New Hampshire must prove

    1. Producer commitments by species and season, with head per week, given only six plants statewide.
    2. Current waiting times and travel distances for producers using plants in New Hampshire and neighbouring states.
    3. Throughput capacity, kill floor and cooler space, and staffing for each shift.
    4. Pricing for slaughter and processing services, and for any own-label products, from regional comparables.
    5. Inspection status and the timeline to a grant of federal inspection if wholesale sales are planned.
    6. By-product, rendering and wastewater arrangements and their costs.
    7. Labour at New Hampshire wages ($57,247 per employee on average) and recruitment of skilled butchers.
    8. Seasonal throughput and working capital through slow months.

    Risks and mitigants

    Throughput risk is the central one: a small plant's fixed costs need steady volume, so producer contracts, a booking system and multi-species capability mitigate it. Labour scarcity for skilled meat cutters can cap capacity. Regulatory risk includes inspection findings and wastewater permits. Seasonality concentrates demand in autumn for many producers. Competition from expanding Vermont plants can draw volume. Processing buildings and equipment have a narrow resale market, and USDA's appraisal excludes going-concern value before the discount (5001.203).

    Process and documents

    Rural Development's New Hampshire office reads the plant study with the lender's B&I application. The sponsor provides site control, plant design and capacity, the construction and equipment budget, producer letters or contracts, inspection plans, wastewater arrangements, financial statements and owner guarantees. USDA's follow-up questions usually start where throughput is assumed rather than committed, producers' alternatives are ignored, by-product costs are missing, or inspection timing is unrealistic.

    Program example

    National program examples (outside New Hampshire): the site's national meat processing page reports, as its state pages state them, Better For Butchery in Caldwell County, Kentucky, with a $2.5 million Rural Development loan, and Cedar County Meat Market in Missouri, with two B&I guarantees. The site's Missouri independent capacity expansion case study is linked below. No New Hampshire meat plant financed by USDA appears in the inputs.

    Hiring a USDA meat processing feasibility study consultant in New Hampshire

    Plant start-ups borrowing more than $1,000,000 under B&I meet a fixed rule in 5001.306(a)(3)(i): an outside study, written by someone qualified whom USDA accepts, covering what USDA specifies. Loan B crosses that line; Loan A, as a smaller loan or an expansion by an existing plant, is a judgment call for USDA under 5001.306(a)(3)(ii). A USDA feasibility study consultant for a meat plant should know livestock supply and processing economics, and be independent of the equipment supplier, the builder and the producers who will use the plant.

    Value-added food processing is one of the classes the cost page singles out for thin secondary data, so operator interviews add time and cost. That usually means the complex B&I tier, $10,500 to $14,500 and up to nine weeks; a well-documented expansion may fit the standard tier, $6,900 to $12,500. Engagement starts with a deposit, typically 50 percent, invoiced at signing, with the balance at draft delivery. Sponsors should gather producer letters, plant design and inspection plans before kickoff.

    Request a meat plant study proposal on the contact page. Fill in the town, program, cost range and lender status, and expect a senior analyst's answer inside one business day, as the page commits.

    Last updated 2026-11-08

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    Does a New Hampshire meat processing plant need a USDA feasibility study?

    It is required once a new plant company's B&I loan goes above $1,000,000 (7 CFR 5001.306(a)(3)(i)). A new multi-species plant will usually exceed that amount, while equipment loans to existing plants, which have averaged $79,167 in recent SBA data, fall to USDA's discretion. Given how few plants operate in the state, a lender will want evidence either way.

    What does a meat processing feasibility study consultant cost?

    The cost page's two B&I bands are $6,900 to $12,500 and, for complex work, $10,500 to $14,500, both fixed in advance. With six plants statewide and little comparable data, most new-plant studies in New Hampshire will need primary research and fall in the complex tier. On Loan B, the B&I upfront guarantee fee is $63,750.00.

    How long does a meat processing feasibility study take?

    Allow up to nine weeks for a complex plant study; a standard one runs closer to six or seven. Surveying producers and plants in New Hampshire and neighbouring states takes most of that time, and is easier outside the autumn rush. Rush delivery is possible at extra cost.

    Who can prepare a USDA meat processing feasibility study?

    A consultant independent of the plant's owners, the equipment supplier, the builder, the producers who will use it and the lender, qualified in meat processing economics, and acceptable to USDA. A producer group's survey is useful evidence but not an independent study, and USDA publishes no roster of accepted consultants.

    How long is a meat processing feasibility study valid?

    The regulation gives no shelf life; in practice market evidence older than about 18 months draws questions, and appraisals are limited to one year at closing. If a neighbouring plant expands or producer commitments change before closing, update the study.

    Can one meat plant study serve SBA and USDA?

    Yes. SBA reserves the right to ask for one (13 CFR 120.160(b)), and a report written for USDA serves both. New Hampshire processors used 13 SBA loans since FY2010, all small, so a plant-scale project will likely compare B&I with other USDA processor programs as well. Keep one model and name each lender.

    With only six plants, where does demand evidence come from?

    From producers. The study gathers commitments by species and season, current waiting times at plants in New Hampshire and neighbouring states, livestock numbers within the haul radius, and buyer interest for own-label products. Vermont's 17 plants and Maine's 16 provide regional operating comparables, labelled by source.

    Does inspection status affect financing?

    Yes. A plant selling meat wholesale needs a grant of federal inspection, which shapes the design, staffing and timeline; a custom-exempt plant serves owners of animals only. The study should state which model applies, the timeline to inspection, and the revenue effect, because a lender will not count wholesale sales before inspection is in place.

    Why are New Hampshire plants so small compared with the national average?

    The state's six plants average 30.3 employees against 149.7 nationally, because the national figure is dominated by large packing plants. New Hampshire plants serve regional producers and local markets. A study should benchmark against small regional plants, using Vermont and Maine data, not national packers.

    Sources

    1. U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files: https://www2.census.gov/programs-surveys/cbp/datasets/
    2. U.S. Census Bureau, Vintage 2025 population estimates (state, county and incorporated places): https://www2.census.gov/programs-surveys/popest/datasets/2020-2025/
    3. Office of Management and Budget, metropolitan and micropolitan delineation, July 2023: https://www2.census.gov/programs-surveys/metro-micro/geographies/reference-files/2023/delineation-files/list1_2023.xlsx
    4. U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: https://data.sba.gov/dataset/7-a-504-foia
    5. 7 CFR Part 5001, OneRD Guaranteed Loanmaking and Servicing, CFR 2026 edition (govinfo): https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml
    6. 91 FR 11272, OneRD annual notice of guarantee fee rates, retention fee rates and guarantee percentages for FY2026 (govinfo): https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm
    7. 90 FR 57351, OneRD guaranteed loan regulation technical amendments, December 11, 2025 (govinfo): https://www.govinfo.gov/content/pkg/FR-2025-12-11/html/2025-22567.htm
    8. 13 CFR Part 120, SBA business loan programs: https://www.ecfr.gov/current/title-13/chapter-I/part-120
    9. USAspending.gov prime award data, Assistance Listings 10.768, 10.766 and 10.868, New Hampshire, FY2024 to FY2026: https://www.usaspending.gov/search
    10. USDA RBCS, Rural Energy for America Program final rule with comment period, 91 FR 62600 (1 Oct 2026), effective 16 Oct 2026: https://www.govinfo.gov/content/pkg/FR-2026-10-01/html/2026-20178.htm
    11. Site cost and timeline page: /usda-feasibility-study-cost; contact page: /contact

    Data current as of November 2026.

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours