Vermont is a small-plant manufacturing state. It has 1,005 manufacturing establishments, 155.2 per 100,000 residents against 84.5 nationally, the highest density of any state in the packs (Wisconsin follows at 143.0), but they average 29.1 employees against 43.4 across the U.S., and 442 of them have fewer than five people on payroll. Its lending history is also kinder than the national one: of 193 manufacturing 7(a) loans Vermont lenders approved in FY2010 to FY2016, 4.1 percent ended in charge-off, where the U.S. figure is 6.4 percent. A USDA manufacturing feasibility study in Vermont has to show that a plant can find customers beyond a small home market, hire skilled labour in a state whose manufacturing workforce is shrinking, and carry its debt through a ramp-up that, for most Vermont plants, starts small.
Manufacturing in Vermont: market evidence
Vermont: manufacturing establishments (all), supply and rural footprint
| Measure | Vermont | United States |
|---|---|---|
| Establishments, 2019 → 2023 | 1,055 → 1,005 (-4.7%) | 287,626 → 284,452 |
| Per 100,000 residents (2023) | 155.2 | 84.5 |
| Average employees per establishment | 29.1 | 43.4 |
| Average annual pay per employee | $64,669 | $73,202 |
| Share of establishments in non-metro counties | 70.1% (705 in 11 counties) | |
| Share of state population in non-metro counties (2025) | 64.7% |
Non-metro counties with the most manufacturing establishments (all) (2023): Washington County (119); Windsor County (102); Rutland County (94); Windham County (91); Bennington County (63); Caledonia County (54).
Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.
Reading the manufacturing numbers. The plant count fell 4.7 percent between 2019 and 2023, against a 1.1 percent national decline, and employment fell from 30,755 to 29,246 (-4.9 percent), so Vermont lost plants and workers at about the same rate and the average plant stayed at 29 employees. Pay per employee rose 10.2 percent, from $58,707 to $64,669, and remains 11.7 percent below the national $73,202. Payroll per plant is $1,881,904 against $3,174,395 nationally, about 59 percent of the U.S. figure, which is the scale difference in one number. For a pro forma, the $64,669 figure is a floor for skilled production roles, not a ceiling: a plant recruiting machinists or technicians against established employers will pay above the state average.
The size-class file shows the shape of the base. Of 1,001 plants with a reported size class, 442 (44.2 percent) employ fewer than five people, 317 employ 5 to 19, 112 employ 20 to 49 and 130 (13.0 percent) employ 50 or more; 17 have 250 to 499 and none reports 500 or more. Food, beverage, meat and wood product plants, which have their own Vermont pages, account for 383 of the 1,005 establishments (38.1 percent). A reviewer will expect a new Vermont plant to explain its customer base outside the state, because few product lines can fill a modern line on Vermont demand alone.
Where the plants are, per 10,000 residents
Every county appears in the county file. Windham (91 plants; 20.13 per 10,000 residents) and Washington (119; 19.95) are the densest, followed by Windsor (102; 17.80), Caledonia (54; 17.75), Lamoille (46; 17.49) and Bennington (63; 17.20). Chittenden County has the most plants, 236, but only 13.96 per 10,000 residents. Franklin (11.72), Essex (5 plants; 8.26) and Grand Isle (4; 5.33) are the least industrial. The non-metro counties are more industrial per resident than the Burlington area, which matters for labour: a rural plant will compete for workers with the other manufacturers in its own county.
Regional comparison (other states' packs)
New Hampshire's pack shows 124.2 plants per 100,000 residents, 39.4 employees per plant and pay of $76,409; Maine's shows 121.3, 34.1 and $64,608. Vermont is denser than either but has smaller plants, and its pay matches Maine's rather than New Hampshire's. Average 7(a) manufacturing loans in FY2020 to FY2026 were $489,366 in New Hampshire and $316,934 in Maine, against $264,724 in Vermont.
Demand, revenue and cost structure
Demand for a manufacturer is its customers: signed purchase orders, supply agreements or letters of intent, the size and growth of the target market, and the share the plant can win against named competitors on price, lead time and quality. Revenue is units by product line times net price, with capacity utilisation ramping over the first two or three years. Costs are materials, direct labour, energy, freight in and out (significant for a Vermont plant shipping to Boston, New York or Montreal markets), maintenance, insurance and overhead. The capital budget usually holds the site and shell, the production line itself, electrical service sized for it, any process-water treatment, storage and handling equipment, and the inventory and receivables a growing plant must carry.
Rural footprint and B&I eligibility in Vermont
The non-metro counties hold 705 of Vermont's 1,005 plants (70.1 percent) and 64.7 percent of its residents, giving 169.1 plants per 100,000 non-metro residents against 131.7 in Chittenden, Franklin and Grand Isle counties. The B&I rural test in 7 CFR 5001.3 does not use metro status: it excludes cities and towns above 50,000 residents and their adjoining urbanized areas. Vermont's largest city, Burlington, had 44,019 residents in the Vintage 2025 estimates, so a plant in an industrial park in the Burlington area is not excluded on population grounds; the lender confirms the parcel with USDA in any case. The Vermont state guide covers the test for all project types.
The borrower must clear 5001.127: no outstanding federal court judgment, delinquent federal tax or federal debt, and no debarment, for the company or any owner of more than 20 percent or with control, and no business deriving income from illegal products. Owners of 20 percent or more sign guarantees (5001.204).
Program fit
For a Vermont manufacturer, B&I can pay for a new building or an addition, machinery, the purchase of a going concern that keeps jobs in place, and working capital, with a ceiling of $25 million per borrower (5001.406(c)). A project that borrows over $1,000,000 and adds more than 50 jobs also needs the Department of Labor to concur (5001.306(a)(1)), one more item for a large Vermont plant's schedule. SBA has been the volume route in Vermont, with 410 7(a) and 44 504 manufacturing loans since FY2010; 504 suits real estate and long-lived equipment, but no Vermont manufacturing 504 loans were recorded in FY2024 to FY2026. REAP can finance efficiency or renewable systems at an operating plant under the rule effective 16 October 2026. Community Facilities does not fund private manufacturing. Conventional bank loans are the default for established plants with collateral; B&I adds value when the loan is large, the term needs to match long-lived assets, or the borrower is new.
Financing benchmarks: USDA B&I next to SBA
Vermont: SBA lending to manufacturing establishments (all)
| Period | 7(a) loans | 7(a) dollars | 504 loans | 504 dollars |
|---|---|---|---|---|
| FY2010 to FY2016 | 193 | $32.3 million | 18 | $9.1 million |
| FY2017 to FY2019 | 87 | $12.9 million | 10 | $8.9 million |
| FY2020 to FY2023 | 85 | $23.5 million | 16 | $10.3 million |
| FY2024 to FY2026 | 45 | $10.9 million | 0 | $0 |
Average 7(a) loan, FY2020 to FY2026: $264,724. Average 504 loan: $645,625. Of the 193 7(a) loans approved in FY2010 to FY2016 for Vermont manufacturing establishments (all), 4.1% were charged off (national: 6.4% of 27,078), on average 66 months after approval.
Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).
| Term | USDA B&I, fiscal 2026 | Source |
|---|---|---|
| Guarantee, loans under $5 million | 85% | 91 FR 11272 |
| Guarantee, $5 million to $25 million | 80% | 91 FR 11272 |
| Upfront guarantee fee | 3.0% of the guaranteed amount | 91 FR 11272; 7 CFR 5001.454 |
| Annual retention fee | 0.55% of the guaranteed share of principal outstanding on 31 December | 91 FR 11272; 7 CFR 5001.455 |
| Reduced-fee loans (criteria in 5001.454) | 1.0% fee, 0.50% retention, 80% guarantee | 91 FR 11272 |
| Guarantee issued before construction is complete | additional 0.50% fee | 91 FR 11272 |
| Maximum loan per borrower | $25 million | 7 CFR 5001.406(c) |
| Term | useful life, 40 years at most, no balloon | 7 CFR 5001.402 |
| Department of Labor concurrence | loans over $1,000,000 creating more than 50 jobs | 7 CFR 5001.306(a)(1) |
| Equity, existing business | 10% balance sheet equity (or 9:1), or 10% of project cost | 7 CFR 5001.105(d)(1) |
| Equity, new business with sales contracts covering debt service | 10% balance sheet equity (or 9:1), or 10% of project cost | 7 CFR 5001.105(d)(2) |
| Equity, other new business | 20% balance sheet equity (or 4:1), or 25% of project cost | 7 CFR 5001.105(d)(4) |
| Independent feasibility study | required above $1,000,000 for a new business | 7 CFR 5001.306(a)(3)(i) |
| SBA 504, for comparison | 10% borrower, 50% bank, 40% CDC debenture; 15% if new or single purpose | 13 CFR 120.900, 120.910 |
What it means for a Vermont plant. Vermont manufacturers borrow often and in small amounts: 130 7(a) loans in FY2020 to FY2026, 0.63 percent of the national count with about 0.19 percent of the population, averaging $264,724 against a national $693,181. Most of those loans would fall under the Agency's discretion for a feasibility study. The projects where B&I matters are larger: a new plant or a major line where the loan passes $1,000,000, at which point a new business needs an independent study, and anything over $5 million, where the guarantee drops from 85 to 80 percent. Vermont's 4.1 percent seasoned loss rate, with losses at 66 months, is a point in a sponsor's favour, but it describes small loans to established shops more than new plants. A new manufacturer with signed contracts covering debt service for the loan term can meet equity at 10 percent under 5001.105(d)(2), against 20 to 25 percent without them, which makes customer contracts worth as much as cash in the capital plan.
Worked example (illustrative)
Loan A rounds Vermont's own 130-loan average for FY2020 to FY2026 ($264,724) to $265,000. Loan B is an illustrative $5,500,000 plant loan, chosen to show the 80 percent tier above $5 million. Each is priced at an assumed 7.50 percent, fixed, and amortized over 20 years.
| Input or result | Loan A | Loan B |
|---|---|---|
| Loan amount | $265,000.00 | $5,500,000.00 |
| Guarantee percentage (fiscal 2026 tier) | 85% | 80% |
| Guaranteed amount | $225,250.00 | $4,400,000.00 |
| Upfront guarantee fee (3.0%) | $6,757.50 | $132,000.00 |
| Upfront fee if issued before construction completion (3.5%) | $7,883.75 | $154,000.00 |
| First annual retention fee (0.55% of the guaranteed share after 12 payments) | $1,211.08 | $23,657.15 |
| Interest rate (illustrative, fixed) | 7.50% | 7.50% |
| Amortization (years) | 20 | 20 |
| Monthly payment | $2,134.82 | $44,307.63 |
| Annual debt service (NOI for 1.00x) | $25,617.86 | $531,691.51 |
| NOI for 1.25x coverage | $32,022.33 | $664,614.38 |
| Coverage at that NOI with a rate 2 points higher | 1.08x | 1.08x |
| Coverage if NOI falls 20% | 1.00x | 1.00x |
| Equity, new business, 25% of project cost (5001.105(d)(4)) | $88,333.33 | $1,833,333.33 |
| Total project cost on that basis | $353,333.33 | $7,333,333.33 |
| Equity, new business, 20% balance sheet route (loan as sole liability) | $66,250.00 | $1,375,000.00 |
| Equity, existing business or contract-backed new business, 10% of project cost | $29,444.44 | $611,111.11 |
| Independent study under 5001.306(a)(3) | Agency discretion | required for a new business |
The tier cliff. Loan B's lender keeps $1,100,000 of unguaranteed exposure (20 percent of $5,500,000). A $4,900,000 loan in the 85 percent tier would leave the lender $735,000 unguaranteed, so the extra $600,000 of borrowing raises the lender's own risk by $365,000. Sponsors near the line should test whether phasing or more equity keeps the loan under $5 million.
Per-production-day test. Over an illustrative 250 production days, Loan A requires $128.09 of net operating income a day at 1.25x and $102.47 to break even on debt; Loan B requires $2,658.46 and $2,126.77. The study converts those into units per day at the projected contribution margin and checks them against line capacity and signed orders. The contract-backed equity route also changes Loan B's capital plan: 10 percent of project cost is $611,111.11 against $1,833,333.33 under the 25 percent route.
What a lender-grade manufacturing feasibility study in Vermont must prove
- Customers: purchase orders, supply agreements or letters of intent, with the share of year-one and year-three volume they cover, because few product lines can be sold inside Vermont alone.
- Market size and competitive position outside the state, with freight cost to the main markets built into delivered price.
- A labour plan that recruits against the other plants in the same county at or above the $64,669 state pay average, with training time.
- Capacity, line rates and a ramp-up curve supported by equipment specifications and vendor commissioning schedules.
- Materials sourcing, price risk and inventory needs, financed in working capital.
- Energy and utility capacity (power, water, wastewater) confirmed by the providers for the site.
- Construction budget and timetable confirmed by an independent consultant where the guarantee is to issue before completion (5001.205(e)(2)).
- Management depth: plant, sales and finance roles filled or recruited, since the Agency can raise equity for weak management (5001.105(d)(5)).
- Department of Labor concurrence where the loan exceeds $1,000,000 and the project creates more than 50 jobs.
- Collateral values for special-purpose buildings and equipment under 5001.203.
Risks and mitigants in Vermont
Customer concentration is the most common weakness of a small plant; the study should show what happens if the largest customer leaves. A tight labour market and a 4.9 percent fall in manufacturing employment since 2019 make hiring the binding constraint for many projects, so the plan should be staffed in phases. Freight from a rural Vermont site raises delivered cost, especially in winter. Equipment delivery delays push revenue back while debt service starts; a reserve or interest-only period (first full payment within three years under 5001.402) helps. A greenfield plant or large addition may need a permit under Act 250, Vermont's development review law, on top of town zoning, and process industries often wait longest on wastewater approvals.
Process, documents and what slows approval
Your lender sends the application and the study to the USDA Rural Development office that covers Vermont; very large requests may also go to the national office for concurrence. The sponsor supplies customer contracts or letters of intent, equipment quotes and specifications, the construction budget and schedule, three years of financial statements for an existing company, interim statements, the organisational chart and resumes, personal financial statements, and environmental and permit status. Studies are returned when sales are projected from market share percentages without named customers, when labour is costed at national ratios, or when the ramp-up assumes full capacity in year one.
Program example
The inputs name no Vermont manufacturer financed under B&I. USAspending shows two B&I guaranteed loans in Vermont in FY2024 to FY2026 for all industries combined.
Hiring a USDA manufacturing feasibility study consultant in Vermont
Section 5001.306(a)(3)(i) requires an independent study, scoped by the Agency, when a newly formed business seeks a B&I guarantee above $1,000,000; for loans at or below that amount, or for an existing company, the Agency and lender decide whether to ask. Most new Vermont plants large enough to use B&I fall in the first group. Whoever writes it can have no stake in the machinery sale, the construction contract, an acquisition or the loan.
The site's pricing page sorts B&I work into two bands: $6,900 to $12,500 and roughly six to seven weeks for a single-site project borrowing $1 million to $10 million with adequate comparable data, and $10,500 to $14,500 over seven to nine weeks once the loan tops $10 million, the project is phased or spread over several sites, or the product has few comparables. That fee buys all five sections USDA reviews, an Excel model running five to ten years with sensitivity cases, the report in PDF and Word, two scheduled calls, a round of revisions and the acceptance guarantee written into the engagement letter; engineering, environmental assessments and appraisals are outside the fee. The sponsor provides contracts, quotes, statements and the management plan. A capable USDA feasibility study consultant should tell you on the first call which of your customer documents a reviewer will count as firm demand and which as hope.
Ask for a fixed-fee proposal on the contact page, with the plant location, product, loan size and lender status; a senior analyst answers each request within one business day, according to that page.
Last updated 2026-11-08
USDA Feasibility, Inc.