USDA Feasibility Study for Sawmills and Wood Products in Vermont

    NAICS 321

    Wood products are Vermont's most rural industry. Of the 87 wood product plants the Census county file can place, 75 (86.2 percent) are in non-metro counties, and the sector as a whole is 3.4 times as dense as the national average, 14.0 plants per 100,000 residents against 4.1; no state pack shows a denser wood products sector, with Montana (13.2) and Maine (12.4) next. It is also shrinking. Vermont lost 11 plants (-10.8 percent) and 269 jobs (-14.6 percent) between 2019 and 2023, while pay per remaining worker rose 21.7 percent. A USDA sawmill or wood products feasibility study in Vermont has to explain why a new mill, kiln or secondary plant will succeed where others have closed: secure log supply, buyers for lumber and residuals, a crew it can hire, and debt sized to survive a lumber price cycle.

    Sawmills and wood products in Vermont: market evidence

    Vermont: wood product manufacturing, supply and rural footprint

    MeasureVermontUnited States
    Establishments, 2019 → 2023102 → 91 (-10.8%)14,223 → 13,899
    Per 100,000 residents (2023)14.04.1
    Average employees per establishment17.331.1
    Average annual pay per employee$50,288$57,420
    Share of establishments in non-metro counties86.2% (75 in 8 counties)
    Share of state population in non-metro counties (2025)64.7%

    Non-metro counties with the most wood product manufacturing (2023): Windham County (17); Rutland County (16); Windsor County (15); Orleans County (8); Washington County (6); Addison County (5).

    Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.

    Reading the wood products numbers. Vermont's decline was nearly five times the national rate (-10.8 against -2.3 percent), and jobs fell faster than plants, from 1,840 to 1,571, so the average plant shrank from 18.0 to 17.3 employees, roughly half the national 31.1. Payroll per plant is $868,165 against $1,785,760 nationally. Pay per employee rose from $41,321 to $50,288, which narrows but does not close the gap to the U.S. $57,420. Two readings follow for a pro forma: labour is scarcer than it was, so a crew will cost at least the state average and probably more for sawyers, filers and maintenance staff; and the mills that remain are small, so a new mill of national scale would be a very large employer by Vermont standards and would have to compete for every experienced worker in its county.

    The size classes confirm the small-plant pattern. Of 89 plants with a size class, 38 (42.7 percent) have fewer than five employees, 32 have five to 19, 13 have 20 to 49 and six have 50 to 99; none employs 100 or more. The industry code covers sawmills, planing and treating, veneer and engineered wood, millwork, containers and pallets, and prefabricated buildings, so a study must benchmark against the right sub-industry rather than this total.

    Where the plants are

    Windham County has the largest cluster, 17 plants for 45,204 residents (3.76 per 10,000), then Orleans (8; 2.90), Rutland (16; 2.68) and Windsor (15; 2.62). Lamoille (4), Caledonia (4), Addison (5), Washington (6) and Franklin (6) each have a handful, and Chittenden has six but only 0.35 per 10,000 residents. The southern and northeastern counties hold the core of the industry. For a new mill, the nearest existing mills are both competitors for logs and possible buyers of rough lumber or residuals, and the study should name them.

    Regional comparison (other states' packs)

    Maine's pack shows 174 wood product plants (12.4 per 100,000 residents, up 3.0 percent) averaging 29.5 employees and paying $53,965, with an average 7(a) loan of $922,564 in FY2020 to FY2026. New Hampshire's shows 109 plants (7.8 per 100,000, flat) with 18.7 employees and pay of $62,136, and a $518,833 average loan. Vermont is denser than both but has smaller plants, lower pay and the only falling count of the three; New York, at 2.3 per 100,000, is not comparable.

    Demand, revenue and cost structure

    A mill's demand is two markets: buyers for its products (grade hardwood or softwood lumber, ties, pallet stock, flooring blanks, timber frames, millwork) and buyers for its residuals (chips, sawdust, bark, slabs) from pulp mills, biomass heating and power plants, pellet makers and farms. Revenue is thousand board feet (MBF) sold by grade times price, plus residual tons times price. Costs are delivered logs (the largest line, set by stumpage, harvesting and haul distance), labour, saw maintenance, energy (kiln drying is energy-intensive), insurance and trucking. Capital items are the headrig or band mill, edgers, trimmers, debarker, kilns, log yard and paving, buildings, mobile equipment, residual handling, and working capital for log inventory, which in Vermont must carry the mill through the spring months when harvesting slows.

    Rural footprint and B&I eligibility in Vermont

    With 86.2 percent of placed plants in non-metro counties against 64.7 percent of residents, wood products are 18.0 plants per 100,000 non-metro residents and 5.3 in the three Burlington-area metro counties. That rural tilt almost guarantees B&I eligibility, but the formal test is 7 CFR 5001.3, which looks only at whether a site lies in a city or town above 50,000 or in the urbanized area adjoining one. No Vermont place passes 50,000 in the Vintage 2025 estimates; Burlington has 44,019. The lender still obtains USDA's determination for the parcel. The Vermont state guide lists eligibility points for each project type.

    Before a study is ordered, the borrower should also confirm it clears 5001.127: no federal debarment, no outstanding federal court judgment, and no delinquent federal tax or federal debt for the company or any owner with over 20 percent or control. Those owners will guarantee the loan (5001.204).

    Program fit

    B&I fits a rural mill or secondary wood plant: land, buildings, sawing and drying equipment, acquisitions that keep a mill running, and working capital. SBA has been used lightly in Vermont, with 21 7(a) loans since FY2010 and not a single 504 loan, so there is no Vermont record of long-term, real-estate-backed SBA lending to the industry. REAP can fund efficiency upgrades or a renewable system at an operating mill, for example a biomass boiler using the mill's own residuals for kiln heat, under the rule effective 16 October 2026 (12 months of operating data before a grant, grants capped at 25 percent of cost). Community Facilities does not finance private mills. A B&I guarantee can be the difference between a lender saying yes and no to a commodity business with a history of price swings.

    Financing benchmarks: USDA B&I next to SBA

    Vermont: SBA lending to wood product manufacturing

    Period7(a) loans7(a) dollars504 loans504 dollars
    FY2010 to FY201611$1.1 million0$0
    FY2017 to FY20193$225,0000$0
    FY2020 to FY20233$456,4000$0
    FY2024 to FY20264$1.7 million0$0

    Average 7(a) loan, FY2020 to FY2026: $308,057. Vermont had fewer than 30 seasoned 7(a) loans for wood product manufacturing; nationally, 7.1% of 1,015 FY2010 to FY2016 loans were charged off, on average 65 months after approval.

    Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).

    TermUSDA B&I, fiscal 2026Source
    Guarantee85% under $5 million; 80% from $5 million to $25 million91 FR 11272
    Upfront guarantee fee3.0% of the guaranteed amount91 FR 11272; 7 CFR 5001.454
    Annual retention fee0.55% of the guaranteed balance on 31 December91 FR 11272; 7 CFR 5001.455
    Guarantee before construction completionadditional 0.50%91 FR 11272
    Termuseful life of the collateral, 40 years at most, no balloon7 CFR 5001.402
    Ratenegotiated, fixed or variable; variable tied to a published base rate7 CFR 5001.401
    Equity, existing mill10% balance sheet equity (or 9:1), or 10% of project cost7 CFR 5001.105(d)(1)
    Equity, new mill with sales contracts covering debt service10% (or 9:1), or 10% of project cost7 CFR 5001.105(d)(2)
    Equity, other new mill20% balance sheet equity (or 4:1), or 25% of project cost7 CFR 5001.105(d)(4)
    Independent feasibility studyrequired above $1,000,000 for a new business7 CFR 5001.306(a)(3)(i)
    Collateralappraisal of real estate and chattels over $250,000; going concern value deducted7 CFR 5001.203

    What it means for a Vermont mill. Lending is thin and recent loans are larger: the three FY2020 to FY2023 7(a) loans averaged $152,133, the four of FY2024 to FY2026 $425,000. Seven loans over seven years cannot anchor a loan size, which is why the example below borrows the U.S. averages instead. The risk record is the industry's weak point: nationally 7.1 percent of seasoned wood products 7(a) loans were charged off, one of the higher rates among the asset types on this site, with losses at 65 months, about the length of one lumber price cycle. Vermont's own seasoned sample, 11 loans with a single charge-off, is too small to read. Mill equipment loses value quickly outside a going concern, and 5001.203 appraisals deduct going concern value, so the equity requirement does much of the work.

    Worked example (illustrative)

    Loan A ($770,000) and Loan B ($1,260,000) round the U.S. FY2020 to FY2026 wood products averages for 7(a) ($766,800) and 504 ($1,263,938); Loan B stands for a mill adding buildings and kilns. Both assume a 7.50 percent fixed rate on a 15-year amortization, shorter than for real estate because saw lines and kilns wear out.

    Input or resultLoan ALoan B
    Loan amount$770,000.00$1,260,000.00
    Guarantee percentage (fiscal 2026 tier)85%85%
    Guaranteed amount$654,500.00$1,071,000.00
    Upfront guarantee fee (3.0%)$19,635.00$32,130.00
    Upfront fee if issued before construction completion (3.5%)$22,907.50$37,485.00
    First annual retention fee (0.55% of the guaranteed share after 12 payments)$3,464.71$5,669.53
    Interest rate (illustrative, fixed)7.50%7.50%
    Amortization (years)1515
    Monthly payment$7,138.00$11,680.36
    Annual debt service (NOI for 1.00x)$85,655.94$140,164.27
    NOI for 1.25x coverage$107,069.93$175,205.34
    Coverage at that NOI with a rate 2 points higher1.11x1.11x
    Coverage if NOI falls 20%1.00x1.00x
    Equity, new mill, 25% of project cost (5001.105(d)(4))$256,666.67$420,000.00
    Total project cost on that basis$1,026,666.67$1,680,000.00
    Equity, new mill, 20% balance sheet route (loan as sole liability)$192,500.00$315,000.00
    Equity, existing mill or contract-backed new mill, 10% of project cost$85,555.56$140,000.00
    Independent study under 5001.306(a)(3)Agency discretionrequired for a new business

    Per-MBF test. If Loan A finances a mill sawing an illustrative 3,000 MBF a year, it needs $35.69 of net operating income per MBF to reach 1.25x and $28.55 to cover debt. Loan B at 6,000 MBF needs $29.20 and $23.36. Those margins, after logs, labour and every other cost, are what a lumber price decline eats first, so the study tests a price drop measured in dollars per MBF against them, and shows the log cost at which coverage falls to 1.00x. A 20 percent fall in NOI already takes either loan to exactly 1.00x.

    What a lender-grade sawmill and wood products feasibility study in Vermont must prove

    1. Log supply: volume and species within an economic haul, stumpage and delivered prices, supply agreements or landowner and logger relationships, and competing mills buying from the same woodlands.
    2. Seasonal supply: log inventory and working capital to carry the mill when harvesting slows.
    3. Product markets and buyers, with letters of intent or purchase orders, grade mix and prices compared with published lumber price series.
    4. Residual markets: tons, buyers and prices for chips, sawdust and bark, or the value of using them for kiln heat.
    5. Crew: hiring plan at or above the $50,288 state average, with skilled roles named, in a county whose wood workforce has been shrinking.
    6. Equipment: specifications, recovery rates, production per shift and maintenance costs, confirmed by vendor or engineer.
    7. Energy for kilns and the cost per MBF dried.
    8. Price stress: coverage across a lumber price cycle, not only at current prices.
    9. Environmental and permit status: air permits for boilers, stormwater, and any land use approvals.

    Risks and mitigants in Vermont

    Lumber prices are the defining risk; diversified products, residual income, contracted volumes and a modest debt load are the mitigants. Log supply can tighten when competing mills or biomass plants bid up stumpage, or when weather limits harvesting. Labour is scarce in rural counties that lost 14.6 percent of their wood product jobs in four years. Fire and dust hazards raise insurance costs. Equipment downtime stops revenue at a single-line mill, so a parts and maintenance reserve matters. Environmental permits for boilers and log yards, and Act 250 land use permits for new or expanded sites, can affect the schedule.

    Process, documents and common reasons for return

    The bank completes its credit memo and then forwards the request and the study to Rural Development's Vermont staff. Mill owners gather the evidence of wood supply, letters from lumber and residual buyers, saw-line and kiln quotes with layouts, energy data, site and permit papers, three years of accounts and tally records if already sawing, and the owners' resumes and personal statements. Studies come back when log supply is assumed rather than documented, when prices are taken from a cycle peak, when residuals are valued without buyers, or when the crew is costed at old wages.

    Program example

    None. The inputs do not name a Vermont mill financed through B&I, and the site's issue log flags mass timber claims on other states' wood pages as unverified, so none is used here.

    Hiring a USDA sawmill and wood products feasibility study consultant in Vermont

    A start-up mill asking B&I for more than $1,000,000 must hand in an independent study whose scope USDA sets (5001.306(a)(3)(i)); Loan B is such a case. An existing mill borrowing less is at the Agency's and lender's discretion, and given the national loss record for this industry, lenders often ask. A sawmill feasibility study consultant cannot be the equipment dealer, a log supplier, the seller of a mill or the lender.

    The site prices a standard B&I engagement between $6,900 and $12,500, normally finished in six or seven weeks; thin comparables, phasing or several sites push a mill into the $10,500 to $14,500 band and up to nine weeks. The fixed fee includes the market, technical, financial, management and economic analysis, a projection with stress tests, the report in PDF and Word with the Excel model, a revision round and the acceptance guarantee; engineering, environmental assessments and appraisals are separate. The sponsor provides supply and buyer evidence, quotes and history. A USDA feasibility study consultant worth hiring for a Vermont mill will model a full lumber price cycle and the spring log gap, not a single price.

    Reach a senior analyst through the contact page with the mill's town, products, loan size and lender status; expect an answer the next business day, the page says.

    Last updated 2026-11-08

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    Is a feasibility study required for a Vermont sawmill loan?

    For B&I, it is mandatory when a new business borrows above $1,000,000 (5001.306(a)(3)(i)), as a new mill near the national 504 average of $1,263,938 would. For a going mill, or a smaller loan, USDA decides. With a national seasoned loss rate of 7.1 percent for the industry, lenders frequently require one anyway.

    How much does a sawmill feasibility study consultant charge?

    Plan on $6,900 to $12,500 for a standard B&I study, or $10,500 to $14,500 if complex, per the site's price list, agreed in writing first. Mills with limited comparables or several products may fall in the complex band. USDA's own fee at closing on a $1,260,000 guarantee is $32,130.00, for comparison.

    How long does a wood products study take?

    Standard mill studies run about six or seven weeks and complex ones up to nine, per the pricing page; you can pay extra for speed. Vermont mill studies often need extra time to document log supply from foresters, loggers and landowners and to collect letters from lumber and residual buyers.

    Who may write a sawmill study for a USDA lender?

    An independent consultant whom USDA accepts as qualified, working to the Agency's scope when the study is required. A forester's supply report or an equipment vendor's recovery estimate are inputs the consultant should use, but neither is a substitute. The lender evaluates the study in its 5001.202 credit analysis. Log suppliers are excluded as well.

    How long is a sawmill study valid?

    Part 5001 has no expiry date. USDA generally expects data within 18 months, per the cost page. Lumber and log prices can move sharply within a year, so the price section and stress tests should be refreshed if prices have shifted materially between the study and the application. Log supply letters should be current too.

    Can the same study support SBA and USDA?

    It can, once both lenders are listed as users and each loan is modelled. SBA can demand a study of its own accord (13 CFR 120.160(b)). Vermont mills have used only 7(a), 21 loans since FY2010 and no 504 loans, so B&I is often the only long-term guaranteed option for a mill's buildings and kilns.

    Why is Vermont losing sawmills and wood product plants?

    The data show the scale, not the cause: 11 fewer plants and 269 fewer jobs between 2019 and 2023, while pay per worker rose 21.7 percent. A new mill should not read the closures as open market share; the study must show why its log supply, products and costs differ from the plants that closed.

    Do residuals matter to a Vermont mill's feasibility?

    They can decide it. Chips, sawdust, bark and slabs are often a third revenue line or a fuel source for kilns. The study should value them only where there is a named buyer or a measured on-site use, since residual prices depend on pulp, pellet and biomass markets that can close.

    Can REAP help a Vermont sawmill?

    Yes, for an operating mill. A residual-fired boiler heating the kilns, or efficiency work, may qualify; under the October 2026 rule the grant arrives only after a year of operating data, covers at most a quarter of the cost, and together with any REAP loan may not pass three-quarters of the project.

    Sources

    1. U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files: https://www2.census.gov/programs-surveys/cbp/datasets/
    2. U.S. Census Bureau, Vintage 2025 population estimates (state, county and incorporated places): https://www2.census.gov/programs-surveys/popest/datasets/2020-2025/
    3. Office of Management and Budget, metropolitan and micropolitan delineation, July 2023: https://www2.census.gov/programs-surveys/metro-micro/geographies/reference-files/2023/delineation-files/list1_2023.xlsx
    4. U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: https://data.sba.gov/dataset/7-a-504-foia
    5. 7 CFR Part 5001, OneRD Guaranteed Loanmaking and Servicing, CFR 2026 edition (govinfo): https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml
    6. 91 FR 11272, OneRD annual notice of guarantee fee rates, retention fee rates and guarantee percentages for FY2026 (govinfo): https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm
    7. USDA RBCS, Rural Energy for America Program final rule with comment period, 91 FR 62600 (1 Oct 2026), effective 16 Oct 2026: https://www.govinfo.gov/content/pkg/FR-2026-10-01/html/2026-20178.htm
    8. 13 CFR Part 120, SBA business loan programs: https://www.ecfr.gov/current/title-13/chapter-I/part-120
    9. USAspending.gov, prime award data by assistance listing (10.768, 10.766, 10.868), FY2024 to FY2026: https://www.usaspending.gov/
    10. Site pages: /industrial-feasibility-study-usda, /usda-feasibility-study-cost, /contact

    Data current as of November 2026.

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours