Wood products are Arkansas's most rural industry. Of 274 sawmills, planing mills, pallet plants and other wood product manufacturers, 67.8 percent sit in non-metro counties, and at 8.9 plants per 100,000 people Arkansas runs at 2.2 times the U.S. density of 4.1. USDA has already guaranteed one of the largest Arkansas timber deals on record, $11,457,803 to Camden Timbers LLC in 2022 to buy and retool a sawmill. A USDA sawmill feasibility study in Arkansas therefore lands on a reviewer who knows the industry, and who will test above all what the hub calls the real credit driver: lumber prices, not log supply.
Sawmills and wood products in Arkansas: market evidence
Arkansas: wood product manufacturing, supply and rural footprint
| Measure | Arkansas | United States |
|---|---|---|
| Establishments, 2019 → 2023 | 274 → 274 (+0.0%) | 14,223 → 13,899 |
| Per 100,000 residents (2023) | 8.9 | 4.1 |
| Average employees per establishment | 38.0 | 31.1 |
| Average annual pay per employee | $57,331 | $57,420 |
| Share of establishments in non-metro counties | 67.8% (166 in 32 counties) | |
| Share of state population in non-metro counties (2025) | 38.0% |
Non-metro counties with the most wood product manufacturing (2023): Drew County (13); Union County (12); Hot Spring County (8); Independence County (8); Pike County (8); Clark County (7).
Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.
Stable count, rising cost. The plant count was exactly 274 in both 2019 and 2023, while the national total fell 2.3 percent, so Arkansas held its mills through the post-2020 lumber price swings. Employment rose 8.4 percent to 10,412, and average pay rose 35.6 percent, from $42,267 to $57,331, now level with the national $57,420. That pay rise is the first number a reviewer will check against an older pro forma. Plants are mid-sized at 38.0 employees on average, with 28 employing 100 to 249 and 4 employing 250 to 499; 101 have fewer than ten, the scale of pallet, post and custom sawmilling shops. A new or retooled mill is judged against those size bands: its labour per thousand board feet, recovery rate and residual sales must look like a working mill's, not a vendor brochure's.
The South Arkansas timber belt (computed)
| County | Wood product plants, 2023 | Employees | Payroll per employee | Plants per 10,000 residents | Hub area office |
|---|---|---|---|---|---|
| Drew | 13 | 477 | $53,247 | 7.62 | Monticello |
| Union | 12 | 819 | $64,237 | 3.25 | Monticello |
| Pike | 8 | 329 | $48,313 | 8.03 | Hope |
| Clark | 7 | 931 | $71,132 | 3.34 | Hope |
| Bradley | 6 | 617 | $73,019 | 6.11 | Monticello |
| Dallas | 5 | 279 | $63,681 | 8.32 | Monticello |
| Washington (metro) | 14 | 1,049 | $46,538 | 0.52 | Harrison |
Computed from the Census County Business Patterns 2023 county file and Vintage 2025 county estimates; all counties except Washington are outside metro areas. County employment and payroll carry Census noise and are indicative.
The concentration is in the south. Dallas County has 8.3 wood plants per 10,000 residents and Pike 8.0, more than nine times the state ratio of 0.88, and Bradley's 617 wood workers earn $73,019 on average, 27 percent above the state figure. Those wages show the labour competition a new mill faces in the timber belt: experienced sawyers, filers and maintenance staff are already employed at well-paid mills nearby. Most of these counties fall under the hub's Monticello area office; Pike and Clark fall under Hope.
Demand, revenue and cost model
Demand comes from lumber, pallet, treated-wood and engineered-product buyers outside the county and often outside the state, so the market analysis is about product, price and buyers. Revenue is lumber volume by grade times market price, plus residuals: chips, sawdust, bark and shavings sold to pulp mills, pellet plants or energy users. The hub's reviewer test names residual chip and byproduct markets directly. The key metrics are log intake, lumber recovery, thousand board feet (MBF) per shift, grade yield, and margin over log cost. Costs are logs (stumpage plus logging and haul), labour, saw maintenance, energy, kiln fuel, insurance and freight. Capital items are the log yard, debarker, headrig and resaw lines, edgers and trimmers, kilns, planer mill, mobile equipment, fire protection and working capital for log and lumber inventory.
Rural footprint and B&I eligibility in Arkansas
With 14.0 wood plants per 100,000 non-metro residents against 4.1 in metro counties, most Arkansas mill sites are rural by any measure. The legal test is 7 CFR 5001.3: B&I cannot finance a site inside a city of more than 50,000 at the latest decennial census or the urbanized area attached to it. Only Washington County's 14 wood plants (Fayetteville and Springdale exceeded 50,000 in 2020) and the few in Benton, Sebastian and Pulaski need a careful check; the timber-belt towns of Monticello, Warren, El Dorado, Camden and Arkadelphia are all far under the line. The Arkansas hub gives the area office map.
Borrower eligibility runs through 5001.127: a mill company, its controlling owner or a 20-percent owner must not owe on a federal judgment, federal income tax or other federal debt, and must not be suspended or debarred. Owners of 20 percent or more personally guarantee their share (5001.204).
Program fit
Camden Timbers was a B&I deal, and the program fits mill purchases, retooling, new lines, kilns and working capital to a ceiling of $25 million for each borrower. Locally owned mills producing a natural-resource value-added product may qualify for the reduced 1.0 percent fee under the criteria the hub lists, though USDA caps that authority each year. SBA 7(a) has made 25 Arkansas wood product loans since FY2010, mostly to smaller shops; 504's injection for a single-use mill building is 15 percent under SBA's contribution rule (13 CFR 120.910), 20 if the business is also new. REAP funded South Central Pallets ($250,000) and Mountain Home Lumber ($223,914) in 2024 under the old rules; since 16 October 2026 a renewable system, such as a biomass boiler for kilns, gets at most 25 percent of cost and $500,000, after 12 months of operation.
Financing benchmarks: USDA B&I next to SBA
Arkansas: SBA lending to wood product manufacturing
| Period | 7(a) loans | 7(a) dollars | 504 loans | 504 dollars |
|---|---|---|---|---|
| FY2010 to FY2016 | 13 | $9.4 million | 1 | $767,000 |
| FY2017 to FY2019 | 6 | $8.2 million | 1 | $3.4 million |
| FY2020 to FY2023 | 5 | $6.9 million | 1 | $496,000 |
| FY2024 to FY2026 | 1 | $538,000 | 0 | $0 |
Average 7(a) loan, FY2020 to FY2026: $1.2 million. Average 504 loan: $496,000. Arkansas had fewer than 30 seasoned 7(a) loans for wood product manufacturing; nationally, 7.1% of 1,015 FY2010 to FY2016 loans were charged off, on average 65 months after approval.
Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).
| B&I term | Fiscal 2026 | Why it matters for a mill |
|---|---|---|
| Guarantee | 85% below $5 million; 80% at $5 million to $25 million | a retooled mill often lands in the 80% tier |
| Fees | 3.0% upfront and 0.55% retention; reduced 1.0% and 0.50% | value-added local mills may qualify |
| Term | useful life, 40 years at most, no balloon | equipment lives are shorter than buildings |
| Equity, existing mill | 10% of project cost or 10% balance sheet | acquisitions by an operating company |
| Equity, new owner | 25% of cost or 20% balance sheet; 10% with sales contracts covering debt service | offtake contracts reduce equity |
| Study | required above $1,000,000 to a new business | 7 CFR 5001.306(a)(3)(i) |
Compiled from the FY2026 notice (91 FR 11272) and Part 5001 sections 105(d), 402 and 306.
What it means for an Arkansas mill. The six Arkansas wood product 7(a) loans written between FY2020 and FY2026 came to $1,231,667 on average, well above the national $766,800, and the hub's B&I precedent is nearly ten times that. Of the 13 Arkansas wood loans approved in the FY2010 to FY2016 cohort, two failed, on average 63 months after approval; the national rate is 7.1 percent of 1,015 loans at 65 months, among the higher industrial loss rates, which reflects the lumber cycle. A buyer of an existing mill that forms a new company is a new business for equity purposes and needs 25 percent of project cost unless qualifying sales contracts cut it to 10 percent.
Worked example (illustrative)
Loan A is $770,000, the national FY2020 to FY2026 wood products 7(a) average ($766,800) rounded, since six Arkansas loans are too few to average. Loan B is $11,460,000, the size of the 2022 Camden Timbers guarantee ($11,457,803) rounded, to show a mill acquisition in the 80 percent tier. Each is amortised over 15 years, to match equipment-heavy collateral, at a hypothetical fixed 7.50 percent.
| Input or result | Loan A | Loan B |
|---|---|---|
| Loan amount | $770,000.00 | $11,460,000.00 |
| Program and fee schedule | B&I, fiscal 2026 | B&I, fiscal 2026 |
| Guarantee percentage | 85% | 80% |
| Guaranteed amount | $654,500.00 | $9,168,000.00 |
| Upfront guarantee fee rate | 3.00% | 3.00% |
| Upfront guarantee fee | $19,635.00 | $275,040.00 |
| Upfront fee if the guarantee issues before construction is complete (+0.50%) | $22,907.50 | $320,880.00 |
| Annual retention fee rate | 0.55% | 0.55% |
| First annual retention fee (on the guaranteed share of the balance after 12 payments) | $3,464.71 | $48,532.41 |
| Interest rate (illustrative, fixed) | 7.50% | 7.50% |
| Amortization in years (no balloon) | 15 | 15 |
| Monthly payment | $7,138.00 | $106,235.62 |
| Annual debt service (NOI for 1.00x) | $85,655.94 | $1,274,827.40 |
| NOI for 1.25x coverage | $107,069.93 | $1,593,534.25 |
| Quarterly debt service | $21,413.99 | $318,706.85 |
| Coverage at that NOI if the rate is 2 points higher | 1.11x | 1.11x |
| Coverage at that NOI if NOI falls 15% | 1.06x | 1.06x |
| Equity, new business, 25% of total project cost (5001.105(d)(4)) | $256,666.67 | $3,820,000.00 |
| Total project cost on that basis | $1,026,666.67 | $15,280,000.00 |
| Equity, new business, 20% balance sheet route if this loan is the only liability | $192,500.00 | $2,865,000.00 |
| Equity, existing business, 10% of project cost (5001.105(d)(1)) | $85,555.56 | $1,273,333.33 |
Computed in Python from the inputs shown; fee and guarantee rates from 91 FR 11272.
Per-MBF test. A mill on Loan B producing an illustrative 25 million board feet a year (25,000 MBF) needs $63.74 of NOI per MBF for 1.25x coverage, and $50.99 per MBF just to pay debt service. The study sets that margin against recent lumber prices less log, labour and haul costs per MBF.
Lumber-price test. If lumber realisations fall enough to cut NOI by 15 percent, coverage drops to 1.06x; a 20 percent cut brings it to 1.00x. Because lumber prices have swung widely since 2020, the study runs a trough-price case and shows the cash reserve or margin from residuals that carries debt service through it. Quarterly debt service on Loan B is $318,706.85.
What a lender-grade sawmill feasibility study in Arkansas must prove
- Lumber price assumptions by product and grade across a full cycle, with a trough case, the core of the hub's reviewer test.
- Log supply within a stated haul radius, with stumpage and delivered log cost, and the competing mills drawing on it.
- Recovery rate and MBF per shift from the equipment plan and comparable mills.
- Residual markets: buyers and prices for chips, sawdust, bark and shavings, with contracts where possible.
- Labour at timber-belt wages (Bradley $73,019, Union $64,237) rather than the state average.
- Kiln, planer and fire protection capacity, and insurance quoted for the actual plant.
- Equipment condition and retooling budget for an acquisition, from an independent inspection.
- Working capital for log decks and lumber inventory, with quarterly cash flow (5001.202).
- Sponsor experience operating a mill, given the Agency can raise equity for weak management (5001.105(d)(5)).
Risks and mitigants in Arkansas
Lumber prices are the main risk; mitigants are contracts with treaters or pallet buyers, product diversity and equity above the minimum. Fire is a standing hazard at mills and kilns, so sprinklers, housekeeping and insurance are part of the technical review. Residual markets depend on nearby pulp and energy users; losing one can turn a revenue line into a disposal cost. Labour competition in the timber belt is real at the wages shown. Saws, kilns and planers resell poorly, so the lender's collateral haircut is deep, and 5001.203 strips business value out of the appraised figure first.
Mill documents and why studies come back
The sponsor provides the purchase agreement or business plan, equipment list and inspection report, retooling quotes, log supply and residual sales agreements, lumber sales history, financial statements for the seller (for an acquisition) and borrower, permits and insurance quotes, and resumes. Little Rock reviews the lender's B&I package. Mill studies tend to fail review when they price lumber at a single recent year, omit residual revenue risk, assume nameplate recovery, or ignore fire protection costs.
Arkansas program example
Camden Timbers LLC, Camden area (USDA B&I, December 2022): $11,457,803 to purchase and retool a sawmill, plus working capital, as listed on USDA Rural Development's 6 December 2022 chart and on the Arkansas hub. Of the four Arkansas B&I guarantees the hub names since 2022 it is the largest, proof that Rural Development will stand behind a South Arkansas mill purchase above $5 million. The listing is USDA's, and this firm did not prepare that deal's study.
Hiring a USDA sawmill feasibility study consultant in Arkansas
Most mill purchases are made through a new acquisition company, and once that company's B&I loan passes $1,000,000, Part 5001 makes the independent study a condition of the guarantee. If an operating mill borrows less to add a kiln or a line, USDA decides whether to ask.
The site's cost page treats loans over $10 million, phased builds and USDA-flagged market risk as complex B&I work, priced at $10,500 to $14,500 with a seven to nine week schedule, which is where a Camden-sized acquisition sits; a smaller mill project with a single site and good comparables is standard, at $6,900 to $12,500 and six to seven weeks. The proposal fixes the fee; the deliverables include the projection model, sensitivity tables, management and technical sections and the acceptance guarantee, while equipment appraisals and engineering are separate engagements. A sawmill feasibility study consultant should ask first for your log supply and lumber sales data. You can read how a USDA feasibility study consultant approaches timber files on the homepage.
For a fixed-fee proposal, put the mill's location, products, annual MBF, budget and lender on the contact page.
Last updated 2026-11-08
USDA Feasibility, Inc.