Montana has 111 food manufacturing plants outside the meat sector, 9.8 per 100,000 residents against 8.1 nationally, and they are small: 17.5 employees on average against 42.0 across the country. That size gap shapes every USDA food processing feasibility study written here. A lender will want to see who buys the product, how far it travels, what the plant pays its people, and whether a company with a few dozen workers can carry the food-safety, packaging and distribution costs that larger rivals spread over far more volume.
Food processing in Montana: market evidence
Montana: food manufacturing (excluding meat), supply and rural footprint
| Measure | Montana | United States |
|---|---|---|
| Establishments, 2019 → 2023 | 104 → 111 (+6.7%) | 24,589 → 27,414 |
| Per 100,000 residents (2023) | 9.8 | 8.1 |
| Average employees per establishment | 17.5 | 42.0 |
| Average annual pay per employee | $48,123 | $58,248 |
| Share of establishments in non-metro counties | 39.1% (45 in 12 counties) | |
| Share of state population in non-metro counties (2025) | 44.7% |
Non-metro counties with the most food manufacturing (excluding meat) (2023): Lake County (8); Flathead County (7); Custer County (4); Park County (4); Chouteau County (3); Fergus County (3).
Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.
Reading the food plant numbers. Montana added 7 plants from 2019 to 2023 (+6.7 percent), a little more than half the national growth of 11.5 percent, so new entrants are not flooding the state but nor is it a fast-growing cluster. The scale gap is the larger point: payroll per plant is $844,108 against $2,445,810 nationally, and pay per employee is $48,123, 17.4 percent below the U.S. $58,248. A pro forma for a new Montana plant can use the state wage as a starting benchmark, but a reviewer will ask why a start-up expects better margins than incumbents three times its size, and how it will buy packaging, freight and ingredients without their volume discounts.
Where the plants are
Food processing in Montana leans toward the metro counties, unusually for a rural state: Gallatin County has 20 plants, Yellowstone 15, Missoula 13 and Cascade 11. Non-metro plants cluster in Lake County (8, or 2.40 per 10,000 residents), Flathead (7), Custer (4, 3.32), Park (4) and Chouteau (3 for 5,865 residents, 5.12 per 10,000), against 0.97 statewide. Metro Carbon and Stillwater counties add 4 and 3. The county figures sum to slightly more than the state total because meat plants are subtracted from a broader industry code and some county cells are suppressed.
Demand drivers and competition
A food plant's market is its buyers, not its neighbours. The study identifies the channels (grocery and club retail, food service distributors, institutions, co-packing, direct and online sales), the buyers in each, and the shelf or contract position the product must win, then tests price against national brands and regional processors. Raw-material supply is the second half of demand analysis: grain, pulses, dairy, honey, fruit or specialty crops, with volumes, seasonality and contracted prices.
Revenue model, costs and capital
Revenue is units by product and channel times net price after slotting, promotion and distributor margins. Costs are ingredients, packaging, labour at Montana pay, utilities, freight, food-safety and testing programs, insurance, and maintenance. Capital items are a building designed for sanitation, processing and packaging lines, refrigeration where the product needs it, wastewater pretreatment, and working capital for inventory and receivables, which grows quickly with retail accounts.
Rural footprint and B&I eligibility in Montana
Non-metro counties hold 45 of the 115 county-placed plants (39.1 percent) against 44.7 percent of Montana's population: 8.8 per 100,000 non-metro residents against 11.1 in metro counties. That reverses the usual Montana pattern and sharpens the eligibility question, because many food plants operate in the counties surrounding Billings, Missoula, Great Falls and Bozeman, the four places of more than 50,000 people (58,814 to 121,239 in 2025) that 7 CFR 5001.3 excludes together with their urbanized fringes. A plant outside those boundaries in Gallatin, Yellowstone, Missoula or Cascade County can still qualify, as can one in Helena (35,138) or any town under 40,000. The Montana state guide explains how to check a parcel.
Regional comparison
Neighbouring packs show that Montana's plants are the smallest in the region except Wyoming's: Idaho's 231 food plants average 75.3 employees, North Dakota's 98 average 53.3, South Dakota's 90 average 50.5, and Wyoming's 53 average 9.1. Density is similar across the five (9.1 to 12.5 per 100,000). Idaho pays $57,841 per employee and North Dakota $65,580, so a Montana plant competing for skilled maintenance or quality staff with plants across the border may need to pay above the Montana average of $48,123.
Program fit
For a food plant in an eligible area, B&I can cover the building, its purchase, processing lines and working capital, amortized over the life of what it finances. SBA 7(a) has been the main Montana route (40 food manufacturing loans since FY2010) but for small amounts, averaging $207,343 in FY2020 to FY2026; SBA 504 financed three plants in FY2010 to FY2016 and none since. REAP can finance refrigeration, process heat or solar at an operating plant once 12 months of data exist. Agricultural producers adding value to their own commodity can also look at USDA's Value-Added Producer Grant, a separate program whose study scope the site's cost page prices separately. A meat or poultry plant belongs on the meat processing page, where SPUR and inspection rules apply.
Financing benchmarks: USDA B&I next to SBA
Montana: SBA lending to food manufacturing (excluding meat)
| Period | 7(a) loans | 7(a) dollars | 504 loans | 504 dollars |
|---|---|---|---|---|
| FY2010 to FY2016 | 23 | $1.7 million | 3 | $2.0 million |
| FY2017 to FY2019 | 3 | $266,500 | 0 | $0 |
| FY2020 to FY2023 | 11 | $2.4 million | 0 | $0 |
| FY2024 to FY2026 | 3 | $509,000 | 0 | $0 |
Average 7(a) loan, FY2020 to FY2026: $207,343. Montana had fewer than 30 seasoned 7(a) loans for food manufacturing (excluding meat); nationally, 7.4% of 3,150 FY2010 to FY2016 loans were charged off, on average 60 months after approval.
Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).
| Term | USDA B&I, fiscal 2026 | Source |
|---|---|---|
| Guarantee, loans under $5 million | 85% | 91 FR 11272 |
| Guarantee, $5 million to $25 million | 80% | 91 FR 11272 |
| Upfront guarantee fee | 3.0% of the guaranteed amount | 91 FR 11272; 7 CFR 5001.454 |
| Annual retention fee | 0.55% of the guaranteed share of principal outstanding on December 31 | 91 FR 11272; 7 CFR 5001.455 |
| Reduced-fee loans (criteria in 5001.454) | 1.0% fee, 0.50% retention, 80% guarantee | 91 FR 11272 |
| Guarantee issued before construction is complete | additional 0.50% fee | 91 FR 11272; 7 CFR 5001.454 |
| Maximum loan per borrower | $25 million | 7 CFR 5001.406(c) |
| Term | useful life of the collateral, 40 years at most, no balloon | 7 CFR 5001.402 |
| Interest rate | negotiated, fixed or variable, no higher than the lender's similar non-guaranteed loans | 7 CFR 5001.401 |
| Equity, existing business | 10% balance sheet equity (or debt to equity of 9:1), or 10% of project cost | 7 CFR 5001.105(d)(1) |
| Equity, new business | 20% balance sheet equity (or 4:1), or 25% of project cost; 25% (or 3:1) when the guarantee issues before construction is complete | 7 CFR 5001.105(d)(3), (d)(4) |
| Independent feasibility study | required above $1,000,000 for a new business; at the Agency's discretion otherwise | 7 CFR 5001.306(a)(3) |
| SBA 7(a), for comparison | 85% guarantee up to $150,000, 75% above | 13 CFR 120.210 |
| SBA 504, for comparison | borrower injection 10%; 15% if new or single purpose; 20% if both | 13 CFR 120.910 |
What it means for a Montana food plant. SBA lending to Montana food manufacturers has been frequent but small: 40 7(a) loans since FY2010, averaging $74,417 in FY2010 to FY2016 and $207,343 in FY2020 to FY2026, less than half the national FY2020 to FY2026 average of $484,253. Among 23 seasoned Montana food plant loans the FOIA file records a single charge-off, too thin a base for a rate; across the country, 7.4 percent of 3,150 FY2010 to FY2016 food manufacturing loans were charged off, on average 60 months after approval, a higher and earlier loss pattern than manufacturing as a whole. A B&I loan for a new Montana plant is likely to be several times the SBA average, which puts it in the full application process and, above $1,000,000 for a new business, makes an independent study mandatory.
Worked example (illustrative)
Loan A, $210,000, rounds Montana's $207,343 average food manufacturing 7(a) loan of FY2020 to FY2026, used here as an equipment loan over 15 years. Loan B, $2,500,000, is an illustrative new plant over 20 years. Both use an illustrative 7.75 percent fixed rate.
| Input or result | Loan A | Loan B |
|---|---|---|
| Loan amount | $210,000.00 | $2,500,000.00 |
| Guarantee percentage (fiscal 2026 tier) | 85% | 85% |
| Guaranteed amount | $178,500.00 | $2,125,000.00 |
| Upfront guarantee fee (3.0% of the guaranteed amount) | $5,355.00 | $63,750.00 |
| Upfront fee if the guarantee issues before construction is complete (+0.50%) | $6,247.50 | $74,375.00 |
| First annual retention fee (0.55% of the guaranteed share of the balance after 12 payments) | $945.68 | $11,432.99 |
| Interest rate (illustrative, fixed) | 7.75% | 7.75% |
| Amortization (years, no balloon) | 15 | 20 |
| Monthly payment | $1,976.68 | $20,523.71 |
| Annual debt service (NOI for 1.00x, break-even on debt) | $23,720.15 | $246,284.57 |
| NOI for 1.25x coverage | $29,650.19 | $307,855.71 |
| Coverage at that NOI if the rate is 2 points higher | 1.11x | 1.08x |
| Coverage at that NOI if the term is 5 years shorter | 0.98x | 1.09x |
| Equity, new business, 25% of total project cost (5001.105(d)(4)) | $70,000.00 | $833,333.33 |
| Total project cost on that basis | $280,000.00 | $3,333,333.33 |
| Equity, new business, 20% balance sheet route if this loan is the only liability | $52,500.00 | $625,000.00 |
| Equity, existing business, 10% of project cost (5001.105(d)(1)) | $23,333.33 | $277,777.78 |
| Independent feasibility study (5001.306(a)(3)) | streamlined path (5001.306(b)); study at the lender's or Agency's discretion | required for a new business (5001.306(a)(3)(i)) |
Payroll and per-job tests. Loan B needs $307,855.71 of net operating income for 1.25x coverage, equal to 36.47 percent of the average Montana food plant's payroll of $844,108; with an illustrative 20 employees that is $15,392.79 of net income per worker. Loan A's 1.25x target, $29,650.19, is modest, but its 15-year term leaves little room: cut the term to 10 years and coverage at that income falls to 0.98x. For equipment loans the study should match amortization to the line's useful life, which 5001.402 allows up to 40 years for the asset base as a whole.
What a lender-grade food processing feasibility study in Montana must prove
- Buyers by channel, with letters of intent, distributor agreements or purchase history, and the share of volume each covers.
- Raw-material supply: sources, contracted volumes, seasonality and price, with a second source for the main input.
- Delivered pricing against national brands and regional plants, including freight from Montana.
- A production plan with capacity, yields, shifts and ramp-up, supported by equipment specifications.
- Food-safety compliance and the regulatory path (FDA, state and local), with the cost of the plan and testing.
- Labour at Montana pay ($48,123 per employee) and a hiring plan, with a premium for skilled roles.
- Working capital for inventory and retail receivables through ramp-up.
- Parcel eligibility under 5001.3, given that 61 percent of Montana's placed food plants are in metro counties.
Risks and mitigants in Montana
Channel risk is the first: a single retail or distributor account can be most of a small plant's sales, so the study caps or stresses it. Ingredient price swings follow commodity markets and weather; contracts and pass-through clauses mitigate them. Freight costs are high from Montana to most population centres, and winter can interrupt shipping. Recalls and food-safety failures can stop sales overnight, so the study budgets insurance and a quality program. Specialised equipment appraises below cost, so collateral relies on real estate and guarantees from 20 percent owners (5001.204).
Process, documents and what gets a study returned
Food plant studies go to USDA as part of the lender's B&I package, and Montana's Rural Development state office completes its review before any conditional commitment. The sponsor provides buyer and supplier evidence, product specifications, equipment quotes, the building budget, food-safety plans, any operating history and personal financial statements. Studies come back when demand rests on market size rather than buyers, when freight and slotting costs are missing, or when ramp-up and working capital are understated.
Program example
No Montana food processing financing appears in the inputs, so this page names none. The site's Wisconsin cheese plant case study, in the links below, shows the method on a project outside Montana.
Hiring a USDA food processing feasibility study consultant in Montana
A start-up food company whose B&I loan exceeds $1,000,000 has to commission its study from an independent food processing feasibility study consultant that USDA accepts (5001.306(a)(3)(i)). Its scope, as the cost page sets it out, spans buyers and channels, ingredient supply, a technical and site review, a multi-year operating model with sensitivity cases, management and economic chapters, and delivery as PDF, Word and Excel files with one revision. It flags value-added food processing as a class where primary research is often needed, which can move a study into the 7 to 9 week complex band. Engineering, environmental and food-safety plans are separate work. The sponsor brings buyer and supplier documents, specifications and budgets. A food company choosing a USDA feasibility study consultant should look for buyer-level demand work rather than market-size estimates, which Montana reviewers test first.
Start on the contact page, listing the plant's town, its products, the program, the cost band and the lender; the page commits to a reply from a senior analyst within one business day.
Last updated 2026-11-08
USDA Feasibility, Inc.