USDA Feasibility Study for Meat and Poultry Processing in Montana

    NAICS 3116

    Montana added 20 meat and poultry plants between 2019 and 2023, from 46 to 66, the largest gain of any state in the national data, and it now has 5.8 plants per 100,000 residents against 1.1 nationally. Those plants are tiny by industry standards, 9.9 employees on average against 149.7 for the U.S., and lenders have noticed: Montana accounted for 3.3 percent of the nation's meat processing SBA 7(a) loans in FY2020 to FY2026 with about a third of one percent of its population. A USDA meat processing feasibility study for a Montana plant must prove what that growth leaves unproven: enough animals, enough customers and enough inspected kill and cut capacity use to carry the debt in a market that just added a third more plants.

    Meat processing in Montana: market evidence

    Montana: meat and poultry processing, supply and rural footprint

    MeasureMontanaUnited States
    Establishments, 2019 → 202346 → 66 (+43.5%)3,501 → 3,716
    Per 100,000 residents (2023)5.81.1
    Average employees per establishment9.9149.7
    Average annual pay per employee$37,980$50,981
    Share of establishments in non-metro counties57.1% (20 in 5 counties)
    Share of state population in non-metro counties (2025)44.7%

    Non-metro counties with the most meat and poultry processing (2023): Ravalli County (5); Beaverhead County (4); Flathead County (4); Park County (4); Dawson County (3).

    Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.

    Reading the meat plant numbers. Montana's 43.5 percent growth against 6.1 percent nationally came from small plants: payroll per plant is $376,348 against $7,630,719 for the average U.S. plant, and pay per employee is $37,980, 25.5 percent below the national $50,981. Those national averages describe large packing plants and are no benchmark for a Montana locker plant; the study should compare a proposed plant with Montana plants of 5 to 20 employees. The rapid growth is the reviewer's main concern. Twenty new plants compete for the same livestock, the same skilled cutters and the same custom-exempt and retail customers, so a new entrant must show that its catchment still has unmet demand for inspected processing, and that its scheduling backlog or customer letters prove it.

    Where the plants are

    The county file places only 35 of the 66 plants; the other 31, 47 percent, sit in counties with one or two plants or are reported statewide, which in a state with 46 non-metro counties points to many small rural plants. Among placed plants, Ravalli County has 5, Beaverhead 4 (3.98 per 10,000 residents), Flathead 4, Park 4 and Dawson 3 (3.45 per 10,000), against a statewide 0.58. Yellowstone, Cascade and Gallatin counties have 5 each. Livestock supply, not population, explains the pattern, and a study should map the plant against cattle, hog, sheep and poultry producers within the hauling radius.

    Demand drivers and competition

    Demand has three layers: producers who need custom-exempt or inspected slaughter for their own animals or direct-to-consumer sales; retail, restaurant and institutional buyers who need inspected product; and the plant's own branded or wholesale lines. Competition is measured in kill and cut capacity per week within a realistic hauling distance, including the plants Census misses. The decisive evidence is booking calendars at existing plants, producer letters of intent with head counts, and buyer commitments for inspected product.

    Revenue model, costs and capital

    Revenue is kill and processing fees per head by species, cut-and-wrap charges, retail and wholesale meat sales, and by-products. Costs are labour (the largest line in a small plant), packaging, utilities for refrigeration and hot water, wastewater handling, rendering or offal disposal, inspection-related overtime, insurance and maintenance. Capital items are the building, kill floor and rail, coolers and freezers, cutting and packaging equipment, smokehouse or further processing, wastewater pretreatment, and livestock pens.

    Rural footprint and B&I eligibility in Montana

    Of the 35 placed plants, 20 (57.1 percent) are in five non-metro counties against 44.7 percent of Montana's population, 3.9 per 100,000 non-metro residents against 2.4 in metro counties. With 31 plants unplaced, the true rural share is almost certainly higher. For B&I, 7 CFR 5001.3 excludes only cities and towns over 50,000 and their contiguous urbanized areas, which in Montana are Billings (121,239), Missoula (78,903), Great Falls (60,208) and Bozeman (58,814); the plants in Yellowstone, Cascade and Gallatin counties may still be eligible if they sit outside those urbanized areas. SPUR, USDA's meat and poultry guarantee, has no geographic restriction at all, as the site's national meat page reports. The Montana state guide has the place list.

    Regional comparison

    Neighbouring packs show how unusual Montana's growth was: Wyoming fell from 30 to 23 plants, North Dakota from 28 to 26, Idaho rose from 42 to 52 and South Dakota from 40 to 44. Plant size differs widely: 9.4 employees in Wyoming, 29.3 in North Dakota, 58.0 in Idaho and 146.2 in South Dakota, where large packers lift the average. A Montana plant's closest peers on scale are Wyoming's, which pay $34,401 per employee against Montana's $37,980.

    Program fit

    Six routes finance meat plants. B&I covers construction, expansion, equipment, acquisition and working capital in rural areas, with the FY2026 85 percent guarantee under $5 million. SPUR, administered under 7 CFR 5001, offers a 90 percent guarantee with a 3 percent fee and 0.55 percent retention fee for FY2027 under USDA's notice of 27 October 2026, according to the site's national meat page, and is open regardless of location. SBA 7(a) has financed 14 Montana meat plants since FY2010; SBA 504 none. REAP can fund refrigeration efficiency at an operating plant. Community Facilities is not a fit for a commercial plant, though a tribal or public facility for community food security can be tested with the state office. Part 5001 bars certain uses of loan funds that often appear in plant budgets, including payments above cost to a related contractor and broker fees.

    Financing benchmarks: USDA B&I next to SBA

    Montana: SBA lending to meat and poultry processing

    Period7(a) loans7(a) dollars504 loans504 dollars
    FY2010 to FY20167$699,8000$0
    FY2017 to FY20190$00$0
    FY2020 to FY20235$3.4 million0$0
    FY2024 to FY20262$5.2 million0$0

    Average 7(a) loan, FY2020 to FY2026: $1.2 million. Montana had fewer than 30 seasoned 7(a) loans for meat and poultry processing; nationally, 3.7% of 214 FY2010 to FY2016 loans were charged off, on average 72 months after approval.

    Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).

    TermUSDA B&I, fiscal 2026Source
    Guarantee, loans under $5 million85%91 FR 11272
    Guarantee, $5 million to $25 million80%91 FR 11272
    Upfront guarantee fee3.0% of the guaranteed amount91 FR 11272; 7 CFR 5001.454
    Annual retention fee0.55% of the guaranteed share of principal outstanding on December 3191 FR 11272; 7 CFR 5001.455
    Reduced-fee loans (criteria in 5001.454)1.0% fee, 0.50% retention, 80% guarantee91 FR 11272
    Guarantee issued before construction is completeadditional 0.50% fee91 FR 11272; 7 CFR 5001.454
    Maximum loan per borrower$25 million7 CFR 5001.406(c)
    Termuseful life of the collateral, 40 years at most, no balloon7 CFR 5001.402
    Interest ratenegotiated, fixed or variable, no higher than the lender's similar non-guaranteed loans7 CFR 5001.401
    Equity, existing business10% balance sheet equity (or debt to equity of 9:1), or 10% of project cost7 CFR 5001.105(d)(1)
    Equity, new business20% balance sheet equity (or 4:1), or 25% of project cost; 25% (or 3:1) when the guarantee issues before construction is complete7 CFR 5001.105(d)(3), (d)(4)
    Independent feasibility studyrequired above $1,000,000 for a new business; at the Agency's discretion otherwise7 CFR 5001.306(a)(3)
    SBA 7(a), for comparison85% guarantee up to $150,000, 75% above13 CFR 120.210
    SBA 504, for comparisonborrower injection 10%; 15% if new or single purpose; 20% if both13 CFR 120.910

    What it means for a Montana meat plant. Montana's 7 meat processing 7(a) loans in FY2020 to FY2026 were 3.29 percent of the U.S. total of 213, about 9.7 times the state's population share, and the size jumped: the FY2010 to FY2016 average was $99,971, the FY2020 to FY2023 average $683,640, and the two FY2024 to FY2026 loans averaged $2,605,000. Montana's seven seasoned meat plant loans show no charge-offs; the national cohort lost 3.7 percent of 214 loans, on average 72 months after approval. A Montana plant at the $1,232,600 FY2020 to FY2026 average would cross the $1,000,000 line at which a new business must provide an independent study for B&I. The same loan under SPUR would carry a 90 percent guarantee: $1,125,000.00 guaranteed, a $33,750.00 upfront fee and a first-year retention fee of about $6,048.70 on the balance after 12 payments.

    Worked example (illustrative)

    The loan is $1,250,000, rounding Montana's $1,232,600 average meat processing 7(a) loan of FY2020 to FY2026, at an illustrative 7.50 percent fixed rate over 20 years. The table uses FY2026 B&I terms; the SPUR figures are in the paragraph above.

    Input or resultLoan A
    Loan amount$1,250,000.00
    Guarantee percentage (fiscal 2026 tier)85%
    Guaranteed amount$1,062,500.00
    Upfront guarantee fee (3.0% of the guaranteed amount)$31,875.00
    Upfront fee if the guarantee issues before construction is complete (+0.50%)$37,187.50
    First annual retention fee (0.55% of the guaranteed share of the balance after 12 payments)$5,712.66
    Interest rate (illustrative, fixed)7.50%
    Amortization (years, no balloon)20
    Monthly payment$10,069.91
    Annual debt service (NOI for 1.00x, break-even on debt)$120,838.98
    NOI for 1.25x coverage$151,048.72
    Coverage at that NOI if the rate is 2 points higher1.08x
    Coverage at that NOI if the term is 5 years shorter1.09x
    Equity, new business, 25% of total project cost (5001.105(d)(4))$416,666.67
    Total project cost on that basis$1,666,666.67
    Equity, new business, 20% balance sheet route if this loan is the only liability$312,500.00
    Equity, existing business, 10% of project cost (5001.105(d)(1))$138,888.89
    Independent feasibility study (5001.306(a)(3))required for a new business (5001.306(a)(3)(i))

    Per-head test. An illustrative plant processing 40 head a week for 50 weeks, 2,000 head a year, needs $75.52 of net operating income per head for 1.25x coverage and $60.42 per head to break even on debt. At 3,000 head the 1.25x figure drops to $50.35. Those are amounts left after labour, packaging, utilities and disposal, so the study must show fee and margin per head by species and the weekly head count the plant can actually book. Add two points to the rate and coverage slips to 1.08x; amortize over 15 years instead and it reads 1.09x.

    What a lender-grade meat processing feasibility study in Montana must prove

    1. Livestock supply within the hauling radius by species and season, with producer letters giving head counts.
    2. Unmet demand after the 20 plants Montana added from 2019 to 2023, shown by booking backlogs and competitor capacity per week.
    3. The inspection route for each sales channel (federal inspection, state inspection where available, or custom exempt), with revenue counted only where the route allows sale.
    4. A grant-of-inspection timeline and a cash flow that assumes no inspected sales until it is granted.
    5. Labour supply and training for skilled cutters at Montana pay ($37,980 per employee on average).
    6. Wastewater, water and offal disposal capacity with costs confirmed by providers.
    7. Weekly utilisation ramp, break-even head counts and price sensitivity.
    8. Rural eligibility for B&I under 5001.3, or the SPUR route if the site fails it.

    Risks and mitigants in Montana

    Seasonal supply is the first risk: fall culling and hunting season fill calendars while summer can leave capacity idle, so the study models weekly utilisation by month. Inspection delays are the second; the national page notes FSIS conditional grants of up to 90 days and validated HACCP plans, and the study should schedule them. Labour is the third, since skilled cutters are scarce and the 20 new plants compete for them. Disposal and rendering costs rise when outlets are far away. Construction overruns on specialised buildings are common, so the 5001.205(e)(2) conditions for an early guarantee (fixed-price contract, independent inspection, equity injected first) are worth meeting even if not required.

    Process, documents and what gets a study returned

    Whether the request is B&I or SPUR, the study rides in the lender's application to Montana's Rural Development state office for review. The sponsor provides producer and buyer letters, the plant design and equipment quotes, the construction budget, inspection plans, any operating records, personal financial statements, and the guarantees of anyone owning 20 percent or more (5001.204). Reviewers send meat plant studies back when supply is assumed rather than documented, when revenue begins before inspection, when competitor capacity is ignored, or when labour costs use national wage data.

    National program example (outside Montana)

    The site's national meat processing page cites publicly announced USDA-funded meat projects as program evidence, including Better For Butchery in Caldwell County, Kentucky (a $2.5 million Rural Development loan) and Cedar County Meat Market in Missouri (two B&I guarantees). Both are outside Montana and are reported as that page states them. The site's Missouri capacity-expansion case study is linked below.

    Hiring a USDA meat processing feasibility study consultant in Montana

    Once a newly formed meat company's B&I loan passes $1,000,000, 5001.306(a)(3)(i) requires the study to come from an independent meat processing feasibility study consultant USDA accepts, and SPUR applies the same Part 5001 rule unless its notice says otherwise. On the cost page's description, the work covers livestock supply and customer demand, the technical and site review, a multi-year model tested for utilisation and price, and management and economic chapters, delivered in PDF, Word and Excel with one revision round. Engineering, environmental, HACCP and inspection paperwork are separate. The sponsor brings producer and buyer evidence, the design, quotes and budget. Before engaging a USDA feasibility study consultant, a Montana plant sponsor should have its producer letters and inspection route in draft, since the study is built around both.

    Begin with the contact page, stating where the plant will run, B&I or SPUR, the cost band and the lender; a senior analyst replies inside one business day, the page says.

    Last updated 2026-11-08

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    Does USDA require a feasibility study for a meat processing plant in Montana?

    Any start-up plant borrowing more than $1,000,000 through B&I must submit one, prepared by an independent consultant USDA accepts, under 7 CFR 5001.306(a)(3)(i). Montana's meat plant 7(a) loans averaged $1,232,600 in FY2020 to FY2026, so a typical new plant is over the line. SPUR loans are administered under Part 5001, so the same rule applies unless the SPUR notice says otherwise; smaller loans are at the Agency's discretion.

    What does a meat processing feasibility study consultant cost?

    Meat plant studies price at $6,900 to $12,500 in the cost page's standard B&I band, or $10,500 to $14,500 where comparables are limited or USDA has flagged market risk. Montana's rapid plant growth means comparable data exist but competitors must be surveyed directly, which can push a study toward the complex band. The fee is fixed in a written proposal before work begins.

    How long does it take?

    Budget six to seven weeks for a standard meat plant study and up to nine for a complex one, per the cost page; a three to four week rush exists at extra cost. Meat plant studies take longer when producer letters must be collected or when the inspection route is still undecided. The inspection approval itself follows its own timeline, which the study schedules.

    Who can prepare a USDA meat processing study?

    A qualified author with no financial tie to the equipment, the building contract, the livestock suppliers or the lender, and one USDA will accept under 5001.306(a)(3)(i). An equipment vendor's capacity estimate is technical input, not the study. USDA keeps no approved list. Expect the state office to look for producer letters gathered by the consultant, not just handed over by the sponsor.

    How long is a Montana meat plant study valid?

    No end date is written into Part 5001. The cost page's guide is market data under roughly 18 months old, and 5001.203 limits the appraisal to one year. With 20 plants added in four years, a Montana study should be refreshed if a competing plant opens in the hauling radius before closing.

    Can the same study serve an SBA lender and USDA?

    Yes. SBA lenders may ask for a study (13 CFR 120.160(b)); one built for B&I or SPUR review answers them. Montana meat plants have used SBA 7(a) 14 times since FY2010, so some sponsors compare an SBA loan with B&I or SPUR. One projection, with all lenders named as intended users, keeps the numbers consistent.

    Is SPUR or B&I better for a Montana meat plant?

    SPUR gives a 90 percent guarantee and no geographic test, which helps a plant near Billings, Great Falls, Missoula or Bozeman, while B&I gives 85 percent under $5 million in rural areas only. On a $1,250,000 loan, SPUR guarantees $1,125,000.00 and B&I $1,062,500.00, with upfront fees of $33,750.00 and $31,875.00. The choice also depends on funding availability under each notice, which the lender confirms.

    How much livestock does a Montana plant need?

    Enough to fill its weekly capacity at the fee and margin per head the projection uses. In the worked example, 2,000 head a year must leave $75.52 each for 1.25x coverage. The study converts that into weekly bookings by species and season and shows letters or contracts from producers within a realistic hauling distance.

    Can a custom-exempt plant use USDA financing?

    It can, if the projection counts only the revenue that custom-exempt status allows: processing for the animal owner's own use, not sales of meat to the public. A plant planning to move to inspected status later should show both phases, with debt service covered in the custom-exempt phase. The national meat page sets out the exemption rules the study should follow.

    Sources

    1. U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files: https://www2.census.gov/programs-surveys/cbp/datasets/
    2. U.S. Census Bureau, Vintage 2025 population estimates (state, county and incorporated places): https://www2.census.gov/programs-surveys/popest/datasets/2020-2025/
    3. Office of Management and Budget, metropolitan and micropolitan delineation, July 2023: https://www2.census.gov/programs-surveys/metro-micro/geographies/reference-files/2023/delineation-files/list1_2023.xlsx
    4. U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: https://data.sba.gov/dataset/7-a-504-foia
    5. 7 CFR Part 5001, OneRD Guaranteed Loanmaking and Servicing, CFR 2026 edition (govinfo): https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml
    6. 91 FR 11272, OneRD annual notice of guarantee fee rates, retention fee rates and guarantee percentages for FY2026 (govinfo): https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm
    7. 90 FR 57351, OneRD guaranteed loan regulation technical amendments, December 11, 2025 (govinfo): https://www.govinfo.gov/content/pkg/FR-2025-12-11/html/2025-22567.htm
    8. 13 CFR Part 120, SBA business loan programs: https://www.ecfr.gov/current/title-13/chapter-I/part-120
    9. Site pages: /meat-processing-feasibility-study-usda (SPUR terms, inspection routes and precedents as reported there), /usda-feasibility-study-cost, /contact

    Data current as of November 2026.

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours