Food manufacturing is growing twice as fast in Tennessee as in the nation: the state had 383 food plants outside the meat sector in 2023, 71 more than in 2019, a 22.8 percent rise against 11.5 percent nationally. The plants are big, averaging 75 employees, and a quarter of them sit in non-metro counties where USDA Business and Industry (B&I) guarantees apply. A food processing feasibility study in Tennessee must show that a new or expanding plant has buyers, a supply of raw product and a cost structure that covers debt, and the hub ties those questions to West Tennessee row crops, Middle Tennessee livestock and the beverage pipeline around the distilling sector.
Food processing in Tennessee: market evidence
Tennessee: food manufacturing (excluding meat), supply and rural footprint
| Measure | Tennessee | United States |
|---|---|---|
| Establishments, 2019 → 2023 | 312 → 383 (+22.8%) | 24,589 → 27,414 |
| Per 100,000 residents (2023) | 5.4 | 8.1 |
| Average employees per establishment | 75.0 | 42.0 |
| Average annual pay per employee | $60,173 | $58,248 |
| Share of establishments in non-metro counties | 24.4% (96 in 17 counties) | |
| Share of state population in non-metro counties (2025) | 21.1% |
Non-metro counties with the most food manufacturing (excluding meat) (2023): Sevier County (26); Cumberland County (9); Bedford County (6); Coffee County (6); Greene County (6); Putnam County (6).
Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.
What the numbers say. Two signals pull in opposite directions. Tennessee has 34% fewer food plants per resident than the nation (5.4 against 8.1 per 100,000), which suggests room for processors serving in-state demand, and it is closing that gap quickly with growth twice the national rate. Its plants are also much larger than average, 75.0 employees against 42.0, and pay $60,173, slightly above the national $58,248; 2023 payroll per plant is $4,513,619 (computed from the pack). A new rural plant will usually be far smaller than that average, so the state means are a ceiling for staffing and a floor for wage competition, since large plants set the local rate. A reviewer will want to see named buyers or co-packing contracts, raw product supply with prices and volumes, and a labour plan that holds up next to the bigger employers in the commuting area.
Rural footprint and B&I eligibility in Tennessee
Food processing is slightly more rural than Tennessee's people: 96 plants in 17 non-metro counties, 24.4 percent of those Census can place, against 21.1 percent of residents, or 6.2 per 100,000 non-metro residents compared with 5.2 in metro counties (computed from the pack's county totals). Sevier County leads with 26, more than Cumberland, Bedford and Coffee combined; Greene and Putnam have six each. B&I eligibility is a separate, place-based test. Under 7 CFR 5001.3 a plant qualifies outside any city or town above 50,000 at the latest decennial census and outside the urbanized area contiguous and adjacent to it.
The Tennessee hub counts fifteen cities over 50,000 at the 2020 Census, including Jackson in West Tennessee and Murfreesboro and Franklin in Middle Tennessee, and screens Shelbyville, Tullahoma, Paris, Dyersburg and Stanton as eligible. Food plants often prefer industrial parks at the edge of a larger town for utilities and labour, which is exactly where urbanized-area boundaries run, so a parcel-level map determination dated before the application belongs in the study.
Program fit for a Tennessee food plant
- B&I guarantee. Plant construction, expansion, equipment and working capital for an eligible processor, 85 percent guaranteed below $5 million and 80 percent up to $25 million.
- SBA 7(a) for processors. Thirty-nine Tennessee food manufacturing 7(a) loans since FY2010 and no 504 loans, so the 504 route is untested here for this asset.
- REAP. Energy efficiency at an operating plant, such as refrigeration or boiler upgrades, can draw a grant of up to 25 percent of cost and $250,000 under the 16 October 2026 rule, after 12 months of operating data; a REAP guaranteed loan can fund the up-front cost.
- Guarantee pause the hub reports. USDA paused loan note guarantees across its business programs for biodigester and controlled-environment agriculture projects from 14 April to 31 December 2026, which matters for indoor growing or waste-to-energy components of a food project.
- Borrower screens. 5001.127 rules out companies whose controlling or 20 percent owners have a federal judgment, delinquent federal tax or debt, or a debarment.
Financing benchmarks: USDA B&I next to SBA
Tennessee: SBA lending to food manufacturing (excluding meat)
| Period | 7(a) loans | 7(a) dollars | 504 loans | 504 dollars |
|---|---|---|---|---|
| FY2010 to FY2016 | 13 | $2.2 million | 0 | $0 |
| FY2017 to FY2019 | 9 | $3.2 million | 0 | $0 |
| FY2020 to FY2023 | 8 | $7.8 million | 0 | $0 |
| FY2024 to FY2026 | 9 | $4.0 million | 0 | $0 |
Average 7(a) loan, FY2020 to FY2026: $693,394. Tennessee had fewer than 30 seasoned 7(a) loans for food manufacturing (excluding meat); nationally, 7.4% of 3,150 FY2010 to FY2016 loans were charged off, on average 60 months after approval.
Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).
| B&I term | FY2026 rule | For a Tennessee food plant |
|---|---|---|
| Guarantee | 85% under $5 million; 80% from $5 million to $25 million | Small processors sit in the 85% tier |
| Fees | 3.0% upfront; 0.55% a year (reduced 1.0% and 0.50% with an 80% guarantee) | Budget both in the sources and uses |
| Equity | 10% for a new business whose sales contracts cover debt service for the loan term; otherwise 20% balance-sheet or 25% of cost | Co-packing or supply contracts can cut the equity requirement |
| Term | Useful life, 40 years at most, no balloon; interest-only allowed if the first full payment falls within 3 years | Processing lines amortize faster than buildings |
| Construction | Guarantee before completion needs equity in first, a fixed-price contract and an independent budget check (5001.205(e)(2)) | Relevant to new plants |
| Study | Independent study required for a new business borrowing over $1 million | Discretionary at the state's average loan size |
B&I terms summarised from 91 FR 11272 and 7 CFR 5001.105(d), 5001.205(e), 5001.306(a)(3) and 5001.402.
What the record says. SBA food manufacturing loans in Tennessee are few and small: 17 in FY2020 to FY2026, $11.8 million, averaging $693,394, and none through 504. Nationally the asset has one of the higher seasoned loss rates in the SBA data, 7.4 percent of 3,150 loans, with failures arriving on average 60 months after approval, five years in. Within Tennessee's own 13 seasoned loans the pack's loan file shows one charge-off, too few for a rate. The national figure is the one a lender will use, and it argues for a study that stresses customer loss and input-cost spikes, not only the ramp-up. USAspending shows 13 Tennessee B&I guaranteed loans across all industries in FY2024 to FY2026.
Worked example (illustrative)
Inputs: a $690,000 B&I loan, the Tennessee average food manufacturing 7(a) loan rounded, at an illustrative 7.75% fixed rate over 15 years, to equip a newly formed processor in a leased building.
| Input or result | Value | Basis |
|---|---|---|
| Loan amount | $690,000.00 | Tennessee FY2020 to FY2026 average food manufacturing 7(a) loan ($693,394), rounded |
| Interest rate (illustrative, fixed) | 7.75% | Negotiated between lender and borrower (7 CFR 5001.401) |
| Term | 15 years, monthly payments, fully amortizing | Useful life, 40 years at most, no balloon (5001.402) |
| FY2026 B&I guarantee | 85% | 91 FR 11272 |
| Guaranteed amount | $586,500.00 | Loan x guarantee percentage |
| Unguaranteed amount (lender's own risk) | $103,500.00 | Loan minus guaranteed amount |
| Upfront guarantee fee (3.00%) | $17,595.00 | Guaranteed amount x fee rate (5001.454) |
| Upfront fee if the guarantee issues before construction is complete (+0.50%) | $20,527.50 | 91 FR 11272 |
| First annual retention fee (0.55%) | $3,107.24 | Guaranteed share of the balance after 12 payments x rate (5001.455) |
| Monthly payment | $6,494.80 | Level amortization |
| Annual debt service | $77,937.63 | 12 x monthly payment |
| NOI needed for 1.25x coverage | $97,422.04 | Annual debt service x 1.25 |
| Coverage on that NOI if the rate were 2 points higher | 1.11x | Debt service at 9.75%: $87,715.23 |
| New business, 25% of project cost route: equity / total cost | $230,000.00 / $920,000.00 | 5001.105(d)(4) |
| New business, 20% balance-sheet equity route (this loan the only debt) | $172,500.00 | 5001.105(d)(4), debt-to-equity 4:1 |
| Existing business, 10% of project cost: equity / total cost | $76,666.67 / $766,666.67 | 5001.105(d)(1) |
Computed in Python from the inputs shown; guarantee, fee and retention rates from 91 FR 11272; equity tests from 7 CFR 5001.105(d). Illustrative, not a quote or a commitment.
Contract-backed equity. If the new company holds sales contracts that cover debt service and run at least as long as the loan, 5001.105(d)(2) lets it close with 10 percent equity: $76,666.67 on a $766,666.67 project, $153,333.33 less than the 25 percent route. Those contracts must actually cover $77,937.63 of annual debt service, and the study is where that is shown.
Labour and production-day tests. An illustrative 25-person plant at the state's average pay carries $1,504,330.12 of payroll, about 15 times the 1.25x NOI target of $97,422.04. The gap between 1.25x and break-even is $19,484.41, roughly 1.3 percent of that payroll. Spread over 250 production days, the target is $389.69 of NOI a day.
Stress. A fixed rate two points higher, 9.75%, lifts debt service to $87,715.23 and cuts coverage to 1.11x; including the first-year retention fee of $3,107.24, the 1.25x target becomes $101,306.09.
How the numbers scale
| B&I loan | FY2026 guarantee | Guaranteed amount | Upfront fee (3.0%) | Annual debt service | NOI for 1.25x | Study rule for a new business (5001.306(a)(3)) | New-business equity at 25% of cost |
|---|---|---|---|---|---|---|---|
| $690,000 | 85% | $586,500.00 | $17,595.00 | $77,937.63 | $97,422.04 | Agency may require | $230,000.00 |
| $2,000,000 | 85% | $1,700,000.00 | $51,000.00 | $225,906.18 | $282,382.73 | Required, independent consultant | $666,666.67 |
| $6,000,000 | 80% | $4,800,000.00 | $144,000.00 | $677,718.54 | $847,148.18 | Required, independent consultant | $2,000,000.00 |
Computed in Python at the same illustrative rate and term; guarantee tiers and fees from 91 FR 11272; study rule from 7 CFR 5001.306(a)(3). A plant-scale loan of $2,000,000 to a new company triggers the independent study, and above $5,000,000 the guarantee drops to 80 percent.
What a lender-grade food processing feasibility study in Tennessee must prove
- Buyers: signed purchase or co-packing agreements, letters of intent, or distributor commitments, with volumes, prices and terms set against the loan term.
- Raw product supply: sources, contracts and price history for the crops, dairy, livestock products or other inputs, and what happens in a short crop year.
- Process and capacity: line speeds, yields, shifts and the utilisation needed to break even.
- Food safety and regulatory approvals required for the products and markets, with their timing built into the schedule.
- Labour: headcount by shift and wages against the $60,173 state average and the larger plants nearby.
- Capital costs from quotes, covering equipment, refrigeration, wastewater, building work and a contingency, with useful lives matching the term.
- Working capital for inventory and receivables through ramp-up, with quarterly cash flow if the guarantee issues before construction ends.
- Utilities: water, wastewater and power capacity at the site, priced by the provider.
- Eligibility: a 5001.3 map determination and, for any indoor-growing or biodigester component, the status of the 2026 pause.
Risks and mitigants in Tennessee
Customer concentration and input prices are the core risks, and the 60-month national loss timing says they show up after start-up. Labour competition is the Tennessee-specific risk: with plants averaging 75 workers, a new processor hires against established employers. Utility capacity, especially wastewater, can decide whether a rural site works at all. The hub's pause on guarantees for controlled-environment agriculture and biodigester projects through 31 December 2026 is a timing risk for integrated projects. Mitigants are contracts with creditworthy buyers, price pass-through clauses, conservative utilisation and an experienced operator.
Process, documents and why studies come back
The lender files with the Rural Development state office serving Tennessee, placed in Nashville by the hub. The sponsor supplies product specifications and process flow, buyer and supplier agreements or letters of intent, equipment quotes and layouts, utility confirmations, the construction or fit-out budget, management résumés and owners' financial statements, and for an existing company three years of statements. Food plant studies come back when sales rest on unsigned buyers, when raw product pricing is a single-year snapshot, when utilisation is assumed rather than built from line capacity, or when wastewater is left out of the capital budget.
Program example: a Tennessee value-added grant to a meat business
The hub's food processing entry cites a $199,309 Value-Added Producer Grant in 2026 to Light Hill Meats in Columbia for beef processing and marketing. It is a grant to a meat business under a different USDA program, not a B&I loan to a food plant, and it is reported on the hub rather than as an engagement of this firm. The hub's precedent file has no Tennessee B&I food processing guarantee.
Hiring a USDA food processing feasibility study consultant in Tennessee
A new business borrowing over $1,000,000 under B&I must submit a study by an independent, qualified consultant acceptable to the Agency, with a scope the Agency sets (7 CFR 5001.306(a)(3)(i)). At the $690,000 average loan size the study is discretionary under 5001.306(a)(3)(ii), but a new plant of any scale usually borrows more, and a lender facing the 7.4 percent national loss rate for this asset is likely to ask for one either way.
The site's cost page names value-added food processing among the asset classes that need primary research. It prices standard B&I studies at $6,900 to $12,500 over six to seven weeks and complex ones at $10,500 to $14,500 over seven to nine weeks, with a three to four-week rush at a 20 to 35 percent premium; a value-added grant planning study is listed at $4,900 to $7,500. The B&I fee includes the five components, market and buyer analysis, competitive supply, comparable operator benchmarks, the five to ten-year projection and Excel model with sensitivity tables, a management assessment, one revision round and the written acceptance guarantee. Engineering, environmental work and construction estimating are separate.
A food processing feasibility study consultant should show you before you sign how buyers, raw product and utilities will be evidenced. The USDA feasibility study consultant homepage explains how the firm works with lenders and the Agency, and the national food processing feasibility study for USDA financing page covers the asset across states. Use the contact page to send the product, site, capacity, project cost and lender status; a senior analyst answers within one business day.
Last updated 2026-11-08
USDA Feasibility, Inc.