USDA Feasibility Study for Meat and Poultry Processing in Tennessee

    NAICS 3116

    Tennessee's meat and poultry plant count grew faster than any neighbour's in this site's data, from 62 in 2019 to 81 in 2023, a 30.6 percent rise against 6.1 percent nationally. Lenders have hardly followed: the SBA file shows two Tennessee meat processing loans since FY2010, both after FY2019. The hub frames the need as cattle and poultry processing capacity across eligible counties and points to the Business and Industry (B&I) program alongside the Meat and Poultry Processing Expansion Program. A meat processing feasibility study in Tennessee has to supply the evidence the loan record cannot: livestock supply, kill and cut capacity, customers and margins per head.

    Meat processing in Tennessee: market evidence

    Tennessee: meat and poultry processing, supply and rural footprint

    MeasureTennesseeUnited States
    Establishments, 2019 → 202362 → 81 (+30.6%)3,501 → 3,716
    Per 100,000 residents (2023)1.11.1
    Average employees per establishment145.8149.7
    Average annual pay per employee$48,524$50,981
    Share of establishments in non-metro counties41.2% (14 in 4 counties)
    Share of state population in non-metro counties (2025)21.1%

    Non-metro counties with the most meat and poultry processing (2023): Henry County (4); Obion County (4); Marshall County (3); Putnam County (3).

    Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.

    Reading a thin record. Tennessee matches the national density exactly (1.1 plants per 100,000) and added 19 plants in four years. The average plant employs 145.8 people, close to the U.S. mean, and pays $48,524, about 5 percent below it; 2023 payroll averages $7,073,123 per plant (computed from the pack). That average is pulled up by a few large poultry and packing operations, so it says little about the small and mid-size plants a B&I loan typically finances. Henry, Obion, Marshall and Putnam are the only non-metro counties with three or more plants; plants in counties with one or two are not shown. The underwriting problem is the SBA record: two loans, no seasoned history, nothing a lender can use to price risk. The study must therefore show capacity, supply and sales from primary evidence rather than from the market.

    Regional comparison

    StateEstablishments 2019 → 2023Per 100,000 (2023)Avg. employeesAvg. payNon-metro shareSBA 7(a) loans FY2010–26SBA 504 loans FY2010–26Avg. 7(a) loan FY2020–26
    Tennessee62 → 81 (+30.6%)1.1145.8$48,52441.2%20$1.3 million
    Kentucky55 → 62 (+12.7%)1.4184.1$45,18147.4%31$165,000
    Missouri128 → 140 (+9.4%)2.3128.3$51,73336.2%183$983,573
    Arkansas67 → 76 (+13.4%)2.5407.7$41,74740.9%60$311,667
    Alabama84 → 78 (-7.1%)1.5329.6$41,50045.2%21$542,550
    Georgia117 → 118 (+0.9%)1.1320.7$44,71420.4%92$2.2 million

    Computed from each state's data pack (Census County Business Patterns 2019 and 2023; SBA 7(a) and 504 FOIA data as of 30 Sep 2026). Each row is that state's own figures; non-metro shares count only counties with three or more establishments.

    Tennessee's growth stands out: Kentucky, Arkansas and Missouri grew 9 to 13 percent, Georgia barely moved, and Alabama shrank. Arkansas, Alabama and Georgia have much larger average plants (320 to 408 employees), the poultry-complex pattern, while Tennessee and Missouri are closer to 130 to 150, a mix that includes smaller beef and pork plants. Missouri has the deepest SBA history in the region, 18 7(a) loans and three 504 loans since FY2010, averaging $983,573 in FY2020 to FY2026; it is the best regional benchmark for loan size and structure. Kentucky's average loan was only $165,000, which suggests small custom or retail-facing plants. Tennessee pays more than every neighbour except Missouri.

    National benchmarks

    Nationally, 3,716 meat and poultry plants employed an average of 149.7 people at $50,981 in 2023. SBA lending to the asset is modest: 214 seasoned 7(a) loans in FY2010 to FY2016, of which 3.7 percent were charged off, on average 72 months after approval, and 213 loans in FY2020 to FY2026 averaging $711,656, the size used in the worked example. That loss rate is lower than for food manufacturing generally, but it rests on lenders' existing selection of experienced operators.

    Rural footprint and B&I eligibility in Tennessee

    Meat processing is rural in Tennessee: 41.2 percent of the plants Census can place are in non-metro counties, almost twice the population share. B&I eligibility is set by 7 CFR 5001.3, which excludes cities and towns above 50,000 at the 2020 Census and the urbanized areas contiguous and adjacent to them. The Tennessee hub lists the fifteen excluded cities and singles out Columbia, which sits near the Spring Hill urbanized area, as needing a map check; that matters here because the hub's one Tennessee meat precedent is in Columbia. A dated USDA determination for the plant parcel should be in the study.

    Program fit for a Tennessee meat plant

    • B&I guarantee. Covers building, expanding and equipping a plant and its working capital, with the FY2026 guarantee at 85 percent under $5 million and 80 percent from there to the $25 million cap.
    • Meat and Poultry Processing Expansion Program. The hub says projects can pair B&I with this grant program to add capacity; its current funding status is not in the inputs.
    • SPUR. The hub states that SPUR now guarantees 90 percent of processing loans up to $175 million with no geographic restriction. FACTS.md does not cover SPUR, so treat this as the hub's statement until confirmed.
    • SBA 7(a) for meat plants. Two Tennessee loans since FY2010, $2.6 million in total; no 504 loans.
    • REAP and the 2026 pause. Refrigeration efficiency at an operating plant can draw a REAP grant of up to 25 percent of cost after 12 months of data; the hub reports a pause on guarantees for biodigester projects from 14 April to 31 December 2026, relevant to plants planning waste-to-energy.
    • Borrower screens. Owners with control or over 20 percent must be free of federal judgments, delinquent federal tax or debt and debarment (5001.127(a)).

    Financing benchmarks: USDA B&I next to SBA

    Tennessee: SBA lending to meat and poultry processing

    Period7(a) loans7(a) dollars504 loans504 dollars
    FY2010 to FY20160$00$0
    FY2017 to FY20190$00$0
    FY2020 to FY20231$2.1 million0$0
    FY2024 to FY20261$500,0000$0

    Average 7(a) loan, FY2020 to FY2026: $1.3 million. Tennessee had fewer than 30 seasoned 7(a) loans for meat and poultry processing; nationally, 3.7% of 214 FY2010 to FY2016 loans were charged off, on average 72 months after approval.

    Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).

    B&I termFY2026 ruleFor a Tennessee meat plant
    Guarantee85% under $5 million; 80% from $5 million to $25 millionSmall and mid-size plants sit in the 85% tier
    Fees3.0% upfront; 0.55% a year (reduced 1.0% and 0.50% with an 80% guarantee)Budget both in sources and uses
    Equity10% for a new business with debt-covering sales contracts as long as the loan; otherwise 20% balance-sheet or 25% of costSupply-chain agreements with retailers or producer groups can lower equity
    ConstructionEquity before guaranteed funds, fixed-price contract, independent budget check (5001.205(e)(2))Plant builds are complex; contingency matters
    TermUseful life, 40 years at most, no balloonCoolers and buildings last longer than processing equipment
    StudyRequired for a new business borrowing over $1 millionA new inspected plant usually crosses it

    B&I terms summarised from 91 FR 11272 and 7 CFR 5001.105(d), 5001.205(e), 5001.306(a)(3) and 5001.402.

    Worked example (illustrative)

    Inputs: a $710,000 loan, the national FY2020 to FY2026 average meat processing 7(a) loan rounded, since Tennessee has only two loans; an illustrative 7.50% fixed rate over 20 years; and a newly formed company equipping a small beef plant processing about 40 head a week.

    Input or resultValueBasis
    Loan amount$710,000.00National FY2020 to FY2026 average meat and poultry processing 7(a) loan ($711,656), rounded; Tennessee has two loans
    Interest rate (illustrative, fixed)7.50%Negotiated between lender and borrower (7 CFR 5001.401)
    Term20 years, monthly payments, fully amortizingUseful life, 40 years at most, no balloon (5001.402)
    FY2026 B&I guarantee85%91 FR 11272
    Guaranteed amount$603,500.00Loan x guarantee percentage
    Unguaranteed amount (lender's own risk)$106,500.00Loan minus guaranteed amount
    Upfront guarantee fee (3.00%)$18,105.00Guaranteed amount x fee rate (5001.454)
    Upfront fee if the guarantee issues before construction is complete (+0.50%)$21,122.5091 FR 11272
    First annual retention fee (0.55%)$3,244.79Guaranteed share of the balance after 12 payments x rate (5001.455)
    Monthly payment$5,719.71Level amortization
    Annual debt service$68,636.5412 x monthly payment
    NOI needed for 1.25x coverage$85,795.68Annual debt service x 1.25
    Coverage on that NOI if the rate were 2 points higher1.08xDebt service at 9.50%: $79,417.58
    New business, 25% of project cost route: equity / total cost$236,666.67 / $946,666.675001.105(d)(4)
    New business, 20% balance-sheet equity route (this loan the only debt)$177,500.005001.105(d)(4), debt-to-equity 4:1
    Existing business, 10% of project cost: equity / total cost$78,888.89 / $788,888.895001.105(d)(1)

    Computed in Python from the inputs shown; guarantee, fee and retention rates from 91 FR 11272; equity tests from 7 CFR 5001.105(d). Illustrative, not a quote or a commitment.

    Per-head test. At 2,000 head a year (about 40 a week over 50 weeks), the 1.25x NOI of $85,795.68 equals $42.90 per head after labour, packaging, utilities, rendering or disposal, inspection-related costs and overhead. The cushion between 1.25x and break-even is $17,159.14; with the first-year retention fee of $3,244.79, the target becomes $89,851.67. At a rate two points higher, 9.50%, coverage on the same NOI is 1.08x.

    Contract route. Supply or offtake agreements that cover debt service for the full loan term let a new company close with 10 percent equity under 5001.105(d)(2): $78,888.89 on a $788,888.89 project, $157,777.78 less than the 25 percent route.

    How the numbers scale

    B&I loanFY2026 guaranteeGuaranteed amountUpfront fee (3.0%)Annual debt serviceNOI for 1.25xStudy rule for a new business (5001.306(a)(3))New-business equity at 25% of cost
    $710,00085%$603,500.00$18,105.00$68,636.54$85,795.68Agency may require$236,666.67
    $2,500,00085%$2,125,000.00$63,750.00$241,677.96$302,097.45Required, independent consultant$833,333.33
    $8,000,00080%$6,400,000.00$192,000.00$773,369.47$966,711.83Required, independent consultant$2,666,666.67

    Computed in Python at the same illustrative rate and term; guarantee tiers and fees from 91 FR 11272; study rule from 7 CFR 5001.306(a)(3). Tennessee's two SBA loans were $500,000, below the first row, and $2.1 million, between the first and second.

    What a lender-grade meat processing feasibility study in Tennessee must prove

    With no local loan history, the study has to build primary evidence:

    1. Livestock supply: producer letters of intent or contracts, head counts by month and the distance animals travel, and competing plants that draw from the same producers.
    2. Kill and cut capacity: daily and weekly throughput, hanging space, cooler capacity and the constraint that sets output.
    3. Inspection status and timeline: federal, state or custom-exempt, and what each allows the plant to sell and where.
    4. Customers and pricing: processing fees for custom work, wholesale and retail price lists, and any retailer, restaurant or institutional contracts.
    5. By-products and waste: rendering, hides and wastewater disposal, with their costs and any revenue.
    6. Labour: skilled cutters and line staff, wages against the $48,524 state average and training time.
    7. Capital costs from vendors and contractors, including coolers, kill floor, wastewater and contingency.
    8. Working capital for inventory and receivables through ramp-up.
    9. Eligibility: a 5001.3 map determination and the 5001.127 screens.

    Risks and mitigants in Tennessee

    Labour is the operating risk: skilled meat cutters are scarce, and a plant that cannot staff a second shift cannot reach its projected throughput. Seasonality is the second, since custom processing peaks in autumn and winter. Wastewater and disposal are the third, because a rural site may lack the utility capacity a plant needs. Mitigants are producer agreements, a mix of custom and wholesale work, a wastewater plan confirmed by the utility, and conservative ramp-up.

    Process, documents and why studies come back

    The lender submits the B&I application to the Rural Development state office serving Tennessee, which the hub places in Nashville. The sponsor supplies the plant design and capacity, the inspection plan, producer and customer letters, equipment and construction quotes, utility confirmations, management résumés and owners' financial statements. Meat plant studies come back when throughput exceeds the cooler or labour constraint, when livestock supply is assumed rather than evidenced, or when wastewater costs are missing.

    Program example: a Tennessee value-added grant

    The hub's precedent file lists a $199,309 Value-Added Producer Grant in 2026 to Light Hill Meats in Columbia for beef processing and marketing. It is a grant under a different USDA program, not a B&I loan, and is reported on the hub rather than as an engagement of this firm. It shows USDA support for beef processing in Middle Tennessee; the hub records no Tennessee B&I meat plant guarantee.

    Hiring a USDA meat processing feasibility study consultant in Tennessee

    Under 7 CFR 5001.306(a)(3)(i), a new business borrowing more than $1,000,000 under B&I must provide a feasibility study from an independent, qualified consultant acceptable to the Agency, scoped by it. The $710,000 example sits below that line, so the study is discretionary for the Agency; a new inspected plant of any real size borrows more, and a lender with no Tennessee loss history to lean on will usually require one.

    The site's cost page prices standard B&I studies at $6,900 to $12,500 over six to seven weeks and complex studies, the band for limited comparable data, at $10,500 to $14,500 over seven to nine weeks; value-added grant planning studies run $4,900 to $7,500 and working capital grant studies $6,500 to $9,500. Rush delivery, three to four weeks, is priced at a 20 to 35 percent premium. Each engagement includes the five Part 5001 components, supply and market analysis, comparable operator benchmarks, the projection and Excel model with sensitivity tables, one revision round and the written acceptance guarantee; plant engineering, environmental work and grant writing are separate.

    A meat processing feasibility study consultant should tell you before you sign how livestock supply and throughput will be evidenced. The homepage explains how a USDA feasibility study consultant supports processors and their lenders, and the national meat processing feasibility study for USDA financing page covers plants in every state. Send the location, species, planned head per week, inspection type, project cost and lender status through the contact page; a senior analyst replies within one business day.

    Last updated 2026-11-08

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    Does a Tennessee meat plant need a feasibility study for a USDA loan?

    The rule bites when a new business asks for a B&I loan above $1,000,000 (5001.306(a)(3)(i)). Tennessee has only two SBA meat processing loans on record, averaging $1.3 million, and the national average was $711,656, so small plants may fall under Agency discretion. With no local loss history, lenders often require a study regardless.

    What does a meat processing feasibility study consultant cost in Tennessee?

    The cost page gives $6,900 to $12,500 for a standard B&I study and $10,500 to $14,500 for complex work, as fixed fees; a VAPG planning study is $4,900 to $7,500. A new plant with no Tennessee comparables usually falls in the complex band. USDA's upfront B&I fee on the $710,000 example is $18,105.00.

    How long does a meat plant study take?

    The cost page sets six to seven weeks for standard B&I work and seven to nine for complex work, with a three to four-week rush available at a premium. Producer interviews and inspection planning take the most time, so bring the plant design, equipment quotes and producer letters to the kick-off call.

    Who can prepare a meat processing study for USDA?

    The preparer has to be independent, qualified and acceptable to the Agency. Equipment vendors, a producer cooperative that will supply animals and the plant's future customers can provide letters and data, but not the analysis. With no published USDA roster, the Rural Development state office serving Tennessee settles acceptability on each file.

    How long is a meat processing feasibility study valid?

    No expiry is set in Part 5001. USDA works to data generally inside 18 months, according to the cost page, and 5001.203 rejects appraisals over a year old. Livestock prices and processing fees change seasonally, so update those inputs if the study is more than a few months old when the lender files.

    Can the same study support SBA, B&I and a value-added grant?

    It can when the report names each intended user and models each structure separately. On the $710,000 example, B&I guarantees $603,500.00 and 7(a) $532,500.00. A Value-Added Producer Grant has its own eligibility and scope, which the cost page prices separately, so the grant version may need its own chapter rather than a cover letter.

    What is the hub's statement about SPUR for meat processors?

    The Tennessee hub states that SPUR now guarantees 90 percent of processing loans up to $175 million with no geographic restriction. FACTS.md, which this page relies on for program rules, does not cover SPUR, so the terms should be confirmed with the lender and the Agency before a project is structured around them. The B&I terms on this page are from the FY2026 notice.

    Why has Tennessee grown so many meat plants with so few SBA loans?

    The data record growth, from 62 plants to 81, but not how it was financed. Plants may have used conventional credit, owner equity, grants or other federal programs; the SBA file captures only 7(a) and 504 loans. For a new project, the gap means a lender cannot benchmark Tennessee loss experience, so the study must carry more of the weight.

    Is Columbia eligible for B&I?

    The hub flags Columbia for a map check because it sits near the Spring Hill urbanized area; Spring Hill counted 50,005 at the 2020 Census, five over the line. Census Vintage 2025 estimates put Columbia itself at 50,072, but estimates do not change the 2020-based test. Each plant parcel needs a dated USDA map determination.

    Sources

    1. U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files: https://www2.census.gov/programs-surveys/cbp/datasets/
    2. U.S. Census Bureau, Vintage 2025 population estimates (state, county and incorporated places): https://www2.census.gov/programs-surveys/popest/datasets/2020-2025/
    3. Office of Management and Budget, metropolitan and micropolitan delineation, July 2023: https://www2.census.gov/programs-surveys/metro-micro/geographies/reference-files/2023/delineation-files/list1_2023.xlsx
    4. U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: https://data.sba.gov/dataset/7-a-504-foia
    5. 7 CFR Part 5001, CFR 2026 edition (govinfo): https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml
    6. 91 FR 11272, OneRD FY2026 guarantee fee, retention fee and guarantee percentage notice (govinfo): https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm
    7. 13 CFR Part 120, SBA business loan programs: https://www.ecfr.gov/current/title-13/chapter-I/part-120
    8. REAP final rule, 91 FR 62600 (1 Oct 2026): https://www.govinfo.gov/content/pkg/FR-2026-10-01/html/2026-20178.htm
    9. Regional figures: this site's data packs for Kentucky, Missouri, Arkansas, Alabama and Georgia (same Census and SBA sources as 1 and 4)
    10. Processing program notes (MPPEP, SPUR), the Columbia map note, the 2026 guarantee pause and the Light Hill Meats grant, as cited on the Tennessee hub
    11. Site pages: /usda-feasibility-study-cost and /contact

    Data current as of November 2026.

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours