Tennessee has 5,787 manufacturing establishments, and the typical one employs 61.8 people, against 43.4 nationally. Plants here are big, the supplier base around the automotive assembly cities is deep, and a large share of the floor space sits in non-metro counties where a USDA Business and Industry (B&I) guarantee can apply. A manufacturing feasibility study for a Tennessee plant has to prove the order book, the labour supply and the capital budget to a lender who knows the state's seasoned manufacturing loans have lost more than the national average.
Manufacturing in Tennessee: market evidence
Tennessee: manufacturing establishments (all), supply and rural footprint
| Measure | Tennessee | United States |
|---|---|---|
| Establishments, 2019 → 2023 | 5,695 → 5,787 (+1.6%) | 287,626 → 284,452 |
| Per 100,000 residents (2023) | 80.9 | 84.5 |
| Average employees per establishment | 61.8 | 43.4 |
| Average annual pay per employee | $66,056 | $73,202 |
| Share of establishments in non-metro counties | 28.1% (1,623 in 49 counties) | |
| Share of state population in non-metro counties (2025) | 21.1% |
Non-metro counties with the most manufacturing establishments (all) (2023): Sevier County (128); Putnam County (109); Greene County (78); Coffee County (72); McMinn County (71); Lawrence County (57).
Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.
What the numbers say. The establishment count rose 1.6 percent from 2019 to 2023 while the national count fell by 3,174 plants, so Tennessee gained share in a shrinking base. Per resident the state sits slightly below the U.S. (80.9 against 84.5 per 100,000), but its plants are 42 percent larger by headcount, and 2023 payroll divided by establishments gives $4,085,026 per plant (computed from the pack). Pay runs $66,056 per worker, about 10 percent under the national $73,202, which is a cost advantage a study can claim only if the subject's own wage survey supports it. A reviewer will test three things against these figures: whether the projected headcount can be hired in the commuting area without poaching from the larger plants that set local wage levels; whether the pay line sits near $66,056 or near the lower rate a rural county may offer; and whether revenue rests on a few customers in one industry.
Rural footprint and B&I eligibility in Tennessee
Manufacturing is more rural in Tennessee than the population is. Census places 1,623 plants in 49 non-metro counties, 28.1 percent of those it can assign to a county, while 21.1 percent of residents live there; per 100,000 residents that is 105.3 plants in non-metro counties against 72.1 in metro counties (computed from the pack's county totals). Sevier (128), Putnam (109), Greene (78), Coffee (72), McMinn (71) and Lawrence (57) lead the non-metro list. Metro status, however, does not decide eligibility. Under 7 CFR 5001.3, B&I money can go anywhere outside a city or town of more than 50,000 people at the latest decennial census and outside the urbanized area contiguous and adjacent to it, so many plants in metro counties also qualify.
The Tennessee hub names fifteen cities over 50,000 at the 2020 Census, among them Smyrna (53,070), Spring Hill (50,005, five people over the line), Chattanooga, Clarksville and Jackson. It describes the state's assembly plants, Nissan at Smyrna, GM at Spring Hill and Volkswagen at Chattanooga, as sitting in excluded cities while driving demand for suppliers in eligible counties, and it places Ford's BlueOval City at Stanton in rural Haywood County, now slated to build gas-powered trucks from 2029 while SK On operates the battery plant. Supplier sites near any of those plants need a parcel-level map check, because the industrial parks on the edge of an excluded city often fall inside its urbanized area. Vintage 2025 estimates show Gallatin, Lebanon, Cleveland and Columbia above 50,000, but the 2020 count still governs; the hub flags Columbia, near the Spring Hill urbanized area, and Erwin, near Johnson City, for a map check.
Program fit for a Tennessee plant
- B&I guarantee. Finances plant construction, expansion, acquisition, machinery and working capital for an eligible borrower, up to $25 million (5001.406(c)), with an 85 percent guarantee below $5 million and 80 percent above.
- SBA 7(a) and 504 for plants. Tennessee manufacturers used 491 7(a) loans and 39 504 loans from FY2010 to FY2026. The 504 split (10 percent owner, 50 percent bank, 40 percent CDC debenture) suits owner-occupied plants; the CDC's share is capped at 40 percent of project cost (13 CFR 120.930).
- REAP. Efficiency upgrades at an operating plant can draw a grant of up to 25 percent of cost and $250,000 under the rule effective 16 October 2026, applied for after 12 months of post-installation data, and a REAP guaranteed loan can fund the up-front cost.
- Co-funding the hub mentions. Appalachian Regional Commission money in distressed East and Middle Tennessee counties, Delta Regional Authority money in West Tennessee, and the state's 2021 C-PACER law, adopted locally.
- Ineligible borrowers. 5001.127 bars a company whose controlling or 20 percent owners carry a federal judgment, delinquent federal tax or debt, or a debarment, and any business with prurient or illegal-product income.
Financing benchmarks: USDA B&I next to SBA
Tennessee: SBA lending to manufacturing establishments (all)
| Period | 7(a) loans | 7(a) dollars | 504 loans | 504 dollars |
|---|---|---|---|---|
| FY2010 to FY2016 | 201 | $126.9 million | 22 | $15.1 million |
| FY2017 to FY2019 | 92 | $72.9 million | 5 | $6.1 million |
| FY2020 to FY2023 | 114 | $111.4 million | 9 | $15.0 million |
| FY2024 to FY2026 | 84 | $61.2 million | 3 | $4.3 million |
Average 7(a) loan, FY2020 to FY2026: $871,702. Average 504 loan: $1.6 million. Of the 201 7(a) loans approved in FY2010 to FY2016 for Tennessee manufacturing establishments (all), 8.5% were charged off (national: 6.4% of 27,078), on average 80 months after approval.
Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).
| B&I term | FY2026 rule | For a Tennessee manufacturing loan |
|---|---|---|
| Guarantee | 85% under $5 million; 80% from $5 million to $25 million | Most supplier expansions fall in the 85% tier; a new plant may not |
| Upfront fee | 3.0% of the guaranteed amount (1.0% reduced) | The reduced fee carries an 80% guarantee |
| Retention fee | 0.55% a year of the guaranteed balance (0.50% reduced) | Fixed for the life of the loan at the obligation-year rate |
| Guarantee before construction completion | +0.50% upfront; equity in before any guaranteed funds | Requires a fixed-price contract and an independent check of budget and timetable (5001.205(e)(2)) |
| Term | Useful life, 40 years at most, no balloon | Building and machinery tranches amortize on different lives |
| Equity | 10% existing; 10% for a new business with debt-covering sales contracts as long as the loan; 25% if construction with an early guarantee; otherwise 20% balance sheet or 25% of cost | The contract route matters for a supplier with a long purchase agreement |
| Jobs | Department of Labor concurrence when the loan exceeds $1 million and creates more than 50 jobs (5001.306(a)(1)) | Tennessee's average plant already employs 61.8 |
| Study | Independent study required for a new business borrowing over $1 million | Scope set by the Agency |
B&I terms summarised from 91 FR 11272 and 7 CFR 5001.105(d), 5001.205(e), 5001.306(a), 5001.402 and 5001.406(c).
What the lending record says. Lenders made 198 manufacturing 7(a) loans in Tennessee worth $172.6 million in FY2020 to FY2026, so credit is available, but the average was only $871,702, and the seasoned record is worse than the nation's: 17 of 201 FY2010 to FY2016 loans, 8.5 percent, were charged off against 6.4 percent nationally, on average 80 months after approval. Losses that arrive six to seven years in suggest customer or product-cycle risk rather than start-up failure, which is exactly what a B&I study must stress. The guarantee helps here: at the average loan size B&I covers 85 percent against 75 percent under 7(a), and USAspending counts only 13 Tennessee B&I guaranteed loans across all industries in FY2024 to FY2026, so each approval carries weight with the state office.
Worked example (illustrative)
Inputs: a $870,000 B&I loan, near the Tennessee average manufacturing 7(a) loan, at an illustrative 7.25% fixed rate over 20 years, for a newly formed parts supplier fitting out a leased building with machinery.
| Input or result | Value | Basis |
|---|---|---|
| Loan amount | $870,000.00 | Tennessee FY2020 to FY2026 average manufacturing 7(a) loan ($871,702), rounded |
| Interest rate (illustrative, fixed) | 7.25% | Negotiated between lender and borrower (7 CFR 5001.401) |
| Term | 20 years, monthly payments, fully amortizing | Useful life, 40 years at most, no balloon (5001.402) |
| FY2026 B&I guarantee | 85% | 91 FR 11272 |
| Guaranteed amount | $739,500.00 | Loan x guarantee percentage |
| Unguaranteed amount (lender's own risk) | $130,500.00 | Loan minus guaranteed amount |
| Upfront guarantee fee (3.00%) | $22,185.00 | Guaranteed amount x fee rate (5001.454) |
| Upfront fee if the guarantee issues before construction is complete (+0.50%) | $25,882.50 | 91 FR 11272 |
| First annual retention fee (0.55%) | $3,973.29 | Guaranteed share of the balance after 12 payments x rate (5001.455) |
| Monthly payment | $6,876.27 | Level amortization |
| Annual debt service | $82,515.25 | 12 x monthly payment |
| NOI needed for 1.25x coverage | $103,144.07 | Annual debt service x 1.25 |
| Coverage on that NOI if the rate were 2 points higher | 1.08x | Debt service at 9.25%: $95,616.50 |
| New business, 25% of project cost route: equity / total cost | $290,000.00 / $1,160,000.00 | 5001.105(d)(4) |
| New business, 20% balance-sheet equity route (this loan the only debt) | $217,500.00 | 5001.105(d)(4), debt-to-equity 4:1 |
| Existing business, 10% of project cost: equity / total cost | $96,666.67 / $966,666.67 | 5001.105(d)(1) |
Computed in Python from the inputs shown; guarantee, fee and retention rates from 91 FR 11272; equity tests from 7 CFR 5001.105(d). Illustrative, not a quote or a commitment.
Payroll is the lever. An illustrative 30-person plant paying the state average of $66,056 carries $1,981,684.85 of payroll a year, about 19 times this loan's 1.25x NOI target of $103,144.07. The gap between 1.25x and break-even is only $20,628.81, which equals 1.04% of that payroll: a wage or overtime overrun of about one percent erases the coverage cushion, so the study's labour model deserves more scrutiny than its revenue line.
Contract-backed equity. A new business holding sales contracts that cover debt service for at least the loan term can close with 10 percent equity under 5001.105(d)(2): $96,666.67 on a $966,666.67 project, $193,333.33 less than the 25 percent route. The study has to show the contracts actually cover the $82,515.25 of annual debt service.
Stress. A two-point higher fixed rate lifts debt service to $95,616.50 and cuts coverage on the same NOI to 1.08x; a 10 percent fall in NOI leaves 1.125x.
How the numbers scale
| B&I loan | FY2026 guarantee | Guaranteed amount | Upfront fee (3.0%) | Annual debt service | NOI for 1.25x | Study rule for a new business (5001.306(a)(3)) | New-business equity at 25% of cost |
|---|---|---|---|---|---|---|---|
| $870,000 | 85% | $739,500.00 | $22,185.00 | $82,515.25 | $103,144.07 | Agency may require | $290,000.00 |
| $2,500,000 | 85% | $2,125,000.00 | $63,750.00 | $237,112.80 | $296,390.99 | Required, independent consultant | $833,333.33 |
| $7,500,000 | 80% | $6,000,000.00 | $180,000.00 | $711,338.39 | $889,172.98 | Required, independent consultant | $2,500,000.00 |
| $15,000,000 | 80% | $12,000,000.00 | $360,000.00 | $1,422,676.77 | $1,778,345.97 | Required, independent consultant | $5,000,000.00 |
Computed in Python at the same illustrative rate and term; guarantee tiers and fees from 91 FR 11272; study rule from 7 CFR 5001.306(a)(3). At the average SBA size the study is discretionary; above $1,000,000 for a new business it is mandatory, and above $5,000,000 the guarantee steps down to 80 percent. Above $1,000,000 a project creating more than 50 jobs also needs Department of Labor concurrence.
What a lender-grade manufacturing feasibility study in Tennessee must prove
- Customers and contracts: signed purchase orders, supply agreements or letters of intent, their terms against the loan term, and the share of revenue from the largest customer.
- Exposure to the automotive cycle, where the subject supplies Nissan, GM, Volkswagen or BlueOval City programmes, including model changeovers and the hub's note that BlueOval City shifts to gas-powered trucks from 2029.
- A labour plan for the commuting area, headcount by shift, wages against the $66,056 state mean, and training lead time.
- Capital costs from quotes: machinery, installation, utilities upgrades, building work and a contingency, with useful lives that support the requested term.
- Unit economics: price, materials, scrap and throughput per line, reconciled to the revenue projection.
- Working capital through ramp-up, with quarterly cash flow where the guarantee issues before construction is complete (5001.202).
- Collateral and guarantees: machinery and real estate appraised under 5001.203, and guarantees from owners of 20 percent or more under 5001.204.
- Eligibility evidence, a dated map determination for the parcel and, above $1,000,000 with more than 50 jobs, the Department of Labor concurrence.
Risks and mitigants in Tennessee
Customer concentration is the leading risk, and the 8.5 percent seasoned loss rate is the state's own warning. Storm exposure is the second: the hub reports that Hurricane Helene in September 2024 hit Unicoi County's industrial park in Erwin, where businesses had recovered to about 60 percent of pre-storm employment by September 2026, and that studies in Helene counties model business interruption, test for the disaster-area reduced fee and confirm flood coverage. The hub also records a USDA pause on loan note guarantees for biodigester and controlled-environment agriculture projects from 14 April to 31 December 2026, and its reading that C-PACER energy components are excluded from B&I under an August 2025 wind and solar policy.
Process, documents and why studies come back
The lender submits the application to the Rural Development state office serving Tennessee, which the hub places in Nashville. The sponsor provides three years of statements and interim financials for an existing company, customer contracts and pipeline, equipment quotes, the construction budget, a site plan, organisation chart and management résumés, and owners' personal financial statements. Manufacturing studies come back when revenue rests on unsigned customers, when wages are below anything the commuting area pays, when machinery lives are stretched to fit a long term, or when the Department of Labor step is missed.
Program example: a Tennessee REDLG, not a B&I loan
The hub's precedent file lists no Tennessee manufacturing B&I guarantee. The nearest entry is a $4,000,000 Rural Economic Development Loan and Grant (REDLG) to the City of Sevierville and Sevier County Electric System in 2015 to 2016 for tourism and manufacturing development. It is a different USDA program, reported on the hub, and not an engagement of this firm.
Hiring a USDA manufacturing feasibility study consultant in Tennessee
For a new company borrowing more than $1,000,000 under B&I, 7 CFR 5001.306(a)(3)(i) requires the study, prepared by an independent and qualified consultant the Agency accepts, to a scope the Agency sets. The $870,000 example sits below that line, so USDA may ask for a study under 5001.306(a)(3)(ii) but is not obliged to; in practice a lender facing an 8.5 percent seasoned loss rate on Tennessee manufacturing loans often requires one, and the plant-scale loans in the table above all trigger the rule.
The site's cost page prices a standard B&I engagement at $6,900 to $12,500 over six to seven weeks and a complex one at $10,500 to $14,500 over seven to nine weeks; multi-site or phased plants and limited comparable data push a study into the complex band, and a three to four-week rush adds 20 to 35 percent. The fixed fee includes the five components, a market and customer analysis, competitive supply and comparable operator benchmarks, the five to ten-year projection and Excel model, sensitivity tables, a management assessment, one revision round and the written acceptance guarantee. Engineering, environmental assessments, appraisals and construction estimating beyond benchmarks are separate.
A manufacturing feasibility study consultant should show how the customer contracts, labour market and capital budget will be tested before quoting. The homepage explains how a USDA feasibility study consultant works alongside the lender and the Agency, and the national guide to industrial feasibility studies for USDA financing covers the asset class across states. Send the site, product line, headcount, project cost and lender status through the contact page for a reply within one business day.
Last updated 2026-11-08
USDA Feasibility, Inc.