USDA Feasibility Study for Meat and Poultry Processing in Washington

    NAICS 3116

    Washington slaughters and processes meat in a handful of large plants close to its cities, and that leaves rural livestock producers with few options. Census counted 57 meat and poultry processing establishments in 2023, five fewer than in 2019 (-8.1%) while the national count rose 6.1%, and every one of the 39 plants the county file places is in a metropolitan county. The average Washington plant employs 104.5 people at $58,097 a year. Independent processing of the scale that a rural Business and Industry (B&I) loan usually finances barely shows up in the data, and SBA records only one Washington meat processing 7(a) loan since FY2020. A feasibility study for a new Washington plant therefore has to build its own evidence: livestock supply, committed customers and an inspection pathway, because local comparables are almost absent.

    Data current as of November 2026.

    When a meat plant needs a USDA feasibility study, and which program fits

    The study is mandatory when a new business seeks a B&I guaranteed loan above $1,000,000: 7 CFR 5001.306(a)(3)(i) requires an independent consultant acceptable to the Agency, working to the Agency's scope. Most new plants exceed that amount once building, coolers, kill floor and rendering or waste handling are counted. Smaller loans and expansions remain at the Agency's discretion (5001.306(a)(3)(ii)), and anything above $600,000 needs the full application.

    Under the fiscal 2026 notice (91 FR 11272), a plant loan under $5 million is 85% guaranteed and one from $5 million to the $25 million cap is 80% guaranteed. A new plant with signed processing or sales contracts covering debt service for the loan term qualifies for the 10% equity test in 5001.105(d)(2); a cooperative or producer group that commits animals under contract is the classic case. The Washington hub states that the SPUR program now guarantees 90% of meat, poultry and seafood processing loans of up to $175 million, with no geographic restriction; those terms are not in the verified program facts used for this page, so treat SPUR as a lead to confirm with the lender, not a basis for the projection. SBA 7(a) and 504 remain options, though Washington lenders have used them only ten and once respectively for meat plants since FY2010. REAP can fund refrigeration efficiency after twelve months of operation and for at most 25% of cost under the rule effective 16 October 2026. Community Facilities financing does not serve commercial processors.

    Eligibility screens include the owner tests in 5001.127(a) and the agricultural production provisions in 5001.105(b)(7), revised by the December 2025 technical amendments, which matter when a ranch and its plant share ownership: the processing business should stand alone with its own statements.

    Meat processing in Washington: market evidence

    Washington: meat and poultry processing, supply and rural footprint

    MeasureWashingtonUnited States
    Establishments, 2019 → 202362 → 57 (-8.1%)3,501 → 3,716
    Per 100,000 residents (2023)0.71.1
    Average employees per establishment104.5149.7
    Average annual pay per employee$58,097$50,981
    Share of establishments in non-metro counties0.0% (0 in 0 counties)
    Share of state population in non-metro counties (2025)10.2%

    Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.

    The scarcity is the finding. Washington has 0.7 meat plants per 100,000 residents against 1.1 nationally, and it lost plants while the country added them. Pay is 14.0% above the national average and the average plant is large, which together say that the state's capacity sits in a few big employers rather than a network of small rural processors. For a lender, that means two things: there are few local plants whose throughput, yields and margins a study can borrow, and the demand case for a small plant rests on producers who currently haul animals long distances or wait for slots.

    Computed: Washington meat processing segments, 2019 and 2023 (Census CBP state files)

    NAICSSegmentWashington 2019Washington 2023ChangeUS changeEmployees, 2023Q1 share of annual payroll
    311611Animal slaughtering (except poultry)3229-9.4%-3.8%3,39225.5%
    311612Meat processed from carcasses2420-16.7%+18.2%1,05225.3%
    311613Rendering and byproducts35+66.7%+8.6%15126.3%
    311615Poultry processing33+0.0%-1.6%1,36426.3%

    The segment table sharpens the point. Plants that process meat from purchased carcasses fell from 24 to 20 in Washington (-16.7%) while that segment grew 18.2% nationally, and slaughter plants fell from 32 to 29. Three poultry plants employ 1,364 people, which is the pattern of large integrated operations. First-quarter payroll runs about 25.6% of the annual total, so the industry is year-round; a small plant built around fall livestock sales will be more seasonal than the state figure and must show it.

    Computed: where Washington's county-placed meat plants are, 2023 (Census CBP county file; all metropolitan under OMB July 2023)

    CountyOMB 2023 statusMeat plants, 2023Residents, 2025Meat plants per 100k residents
    King CountyMetropolitan142,344,9390.6
    Skagit CountyMetropolitan5132,9753.8
    Spokane CountyMetropolitan5558,3440.9
    Cowlitz CountyMetropolitan3114,8852.6
    Snohomish CountyMetropolitan3870,6560.3
    Thurston CountyMetropolitan3304,2611.0
    Whatcom CountyMetropolitan3236,3921.3
    Yakima CountyMetropolitan3259,1851.2

    Eighteen of the 57 plants are not assigned to a county in the Census file, and the 39 that are sit in eight metropolitan counties. That does not mean rural sites are ineligible: Yakima, Skagit and Whatcom are metropolitan counties with large rural areas, and the hub places cattle and dairy processing demand in the Columbia Basin.

    Regional comparison: Washington against its neighbours

    Computed from the Oregon, Idaho and Montana meat processing packs (their figures, same Census and SBA sources)

    StatePlants 2019 → 2023Per 100k residentsAverage employeesAverage payShare in nonmetropolitan countiesSBA 7(a) loans, fiscal 2010 to 2026
    Washington62 → 570.7104.5$58,0970.0%10
    Oregon53 → 541.354.5$49,89829.4%9
    Idaho42 → 522.658.0$50,46365.7%4
    Montana46 → 665.89.9$37,98057.1%14

    Washington is the outlier. Montana has eight times Washington's density of plants per resident with an average of 9.9 employees, the profile of small custom and inspected plants; Idaho has 2.6 per 100,000 with two thirds in non-metro counties; Oregon has 29.4% non-metro. All three neighbours kept or added plants since 2019. For a Washington sponsor this cuts both ways. It supports the claim that rural Washington is under-served by small processors, and it warns that comparable plants and their operating data will mostly come from out of state, which a reviewer will want adjusted for Washington wages.

    Rural footprint and B&I eligibility in Washington

    Because no county-placed plant is in a non-metro county, the non-metro share cannot guide site selection here. The test that governs is 7 CFR 5001.3: a site qualifies if it is outside cities above 50,000 at the 2020 Census and outside the urbanized area contiguous to them, and an application cannot be approved on the expectation that the site will qualify. The Washington USDA page screens Moses Lake, Quincy, Ellensburg, Walla Walla, Wenatchee, Mount Vernon and the lower Yakima Valley towns (Wapato, Toppenish, Zillah, Granger, Sunnyside, Grandview) as eligible, and lists Yakima, Union Gap, Selah, Moxee and Naches as inside the Yakima urbanized area. The hub also cautions that Growth Management Act rules may require a plant to sit within a small-town urban growth area.

    Financing benchmarks: USDA B&I next to SBA

    Washington: SBA lending to meat and poultry processing

    Period7(a) loans7(a) dollars504 loans504 dollars
    FY2010 to FY20168$4.1 million1$707,000
    FY2017 to FY20191$234,5000$0
    FY2020 to FY20230$00$0
    FY2024 to FY20261$436,2000$0

    Average 7(a) loan, FY2020 to FY2026: $436,200. Washington had fewer than 30 seasoned 7(a) loans for meat and poultry processing; nationally, 3.7% of 214 FY2010 to FY2016 loans were charged off, on average 72 months after approval.

    Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).

    One loan since FY2020 is not a benchmark, so the worked example uses the national FY2020 to FY2026 average of $711,656. Nationally, 3.7% of the 214 seasoned meat processing 7(a) loans were charged off, about six years after approval. That record is reasonable, but it covers established plants; a new Washington plant with no operating history and few local comparables will be judged on the strength of its supply and customer commitments, and 5001.105(d)(5) lets the Agency raise equity when industry risk or the study is weak.

    TermB&I ruleWhat it means for a Washington meat plant
    Guarantee85% under $5 million; 80% from $5 million to $25 million (91 FR 11272)Small multi-species plants fit the 85% tier
    Fees3.0% of the guaranteed share; 3.5% when the guarantee issues before construction ends; 0.55% annual retentionMost new plants are built with the guarantee issued before completion
    TermUseful life to 40 years, no balloon (5001.402)Kill floor and coolers support 20 years or more; equipment less
    Equity with contracts10% if contracts cover debt service for the loan term (5001.105(d)(2))Producer supply and processing agreements are worth negotiating early
    Equity, other new plants20% balance sheet equity (4:1) or 25% of cost; 25% if the guarantee issues before completion (5001.105(d)(3) and (4))The usual case for a first plant
    ConstructionFixed-price contract, equity injected first, cost-overrun contingency and start-up working capital (5001.205(e)(2))Equipment lead times belong in the schedule
    CollateralAppraisal over $250,000; specialised plants discounted (5001.203)Single-purpose buildings often appraise below cost

    Worked example (illustrative)

    Inputs. Loan A is $710,000, the US FY2020 to FY2026 meat processing 7(a) average of $711,656 rounded, because Washington has one loan in that period. Loan B is an illustrative $3,000,000 new multi-species plant. Both assume 7.50% fixed over 20 years with monthly payments (illustrative, within 5001.401 and 5001.402). Annual throughput of 2,500 and 9,000 head is assumed to translate NOI into a per-head figure. Retention is computed on the balance after one year of payments; equity lines treat the loan as the only debt.

    Computed: B&I terms on two meat processing loans in Washington (Python, exact to the cent)

    LineLoan A: US 7(a) averageLoan B: illustrative new plant
    Loan amount$710,000.00$3,000,000.00
    Guarantee (fiscal 2026 notice)85%85%
    Guaranteed amount$603,500.00$2,550,000.00
    Lender's unguaranteed share$106,500.00$450,000.00
    Upfront guarantee fee$18,105.00 (3.0%)$76,500.00 (3.0%)
    Balance after 12 payments$694,073.37$2,932,704.39
    First annual retention fee$3,244.79 (0.55%)$13,710.39 (0.55%)
    Monthly principal and interest$5,719.71$24,167.80
    Annual debt service$68,636.54$290,013.55
    NOI for 1.00x (break-even)$68,636.54$290,013.55
    NOI for 1.25x$85,795.68$362,516.94
    Coverage if NOI falls 15%1.06x1.06x
    Coverage if the rate is 2 points higher1.08x1.08x
    NOI per head for 1.25x (illustrative annual kill)$34.32 (2,500 head)$40.28 (9,000 head)
    Upfront fee if the guarantee issues before construction is complete (+0.50%)$21,122.50$89,250.00
    New business, 5001.105(d)(4): 25% of project cost$236,666.67 on $946,666.67$1,000,000.00 on $4,000,000.00
    New business, 5001.105(d)(4): 20% balance sheet equity (4:1)$177,500.00$750,000.00
    Existing business, 5001.105(d)(1): 10% of project cost$78,888.89 on $788,888.89$333,333.33 on $3,333,333.33
    SBA 7(a) on the same loan: guaranteed / fee ceiling$532,500.00 / $18,637.50$2,250,000.00 / $81,875.00

    Loan B needs $362,516.94 of net operating income for 1.25x, or $40.28 of NOI per head at 9,000 head a year; Loan A needs $34.32 per head at 2,500. Those per-head figures are the number a study should test against processing fees, byproduct value and labour per head. Building with the guarantee issued before completion raises Loan B's upfront fee to $89,250.00 and its new-business equity test to 25%, $1,000,000.00.

    Computed: stress test for the two meat processing loans

    ScenarioLoan ALoan B
    Base case: NOI at 1.25x$85,795.68 / 1.25x$362,516.94 / 1.25x
    NOI down 10%$77,216.11 / 1.13x$326,265.24 / 1.13x
    NOI down 20%$68,636.54 / 1.00x$290,013.55 / 1.00x
    NOI down 30%$60,056.97 / 0.88x$253,761.86 / 0.88x
    Rate 1 point higher, re-amortised1.16x (debt service $73,938.54)1.16x (debt service $312,416.36)
    Rate 2 points higher, re-amortised1.08x (debt service $79,417.58)1.08x (debt service $335,567.23)
    Rate 3 points higher, re-amortised1.01x (debt service $85,061.97)1.01x (debt service $359,416.76)

    A plant underwritten at 1.25x breaks even if net income falls 20%, which a lost anchor producer or a season of short supply can cause. A rate three points higher on a variable loan leaves 1.01x.

    Evidence a Washington meat plant study must build

    1. Livestock supply by name: producers, head counts by month and species, and signed or letter-of-intent commitments, within a stated haul distance.
    2. Customer demand: retail, restaurant and direct-to-consumer buyers, with volumes, cut specifications and prices.
    3. Inspection pathway: whether the plant will operate under federal inspection or as custom-exempt, and the timeline and costs that follow.
    4. Throughput and yields: kill and cut capacity per day and per week, carcass yields and byproduct handling.
    5. Labour at Washington wages: benchmarked against $58,097 and adjusted for plant size, with a training plan.
    6. Waste and water: rendering, wastewater and solid waste solutions, with documents from the service provider or utility.
    7. Out-of-state comparables: operating data from Oregon, Idaho or Montana plants, adjusted to Washington costs.
    8. Capital budget and construction plan: quotes, contingency, equipment lead times and start-up working capital.
    9. Coverage and stress: 1.25x at stabilisation, break-even volume and the stresses above.
    10. Management: plant manager experience and the owners' record in meat processing or livestock.

    Washington risks a meat processing study has to carry

    • No local comparables. Expect the reviewer to ask where throughput, yield and cost assumptions come from.
    • Supply concentration. A plant dependent on a few producers is exposed if one sells to a large packer instead.
    • Labour. Pay 14.0% above the national average for the industry; small plants compete with large employers.
    • Seasonality. Fall and holiday peaks in custom work drive working capital needs that 5001.202's quarterly cash flow rule exposes.
    • Program terms. The SPUR terms quoted by the hub and any Food Supply Chain references need confirmation; the site's engagements page describes the Food Supply Chain program as discontinued in 2023.
    • Timing. The hub reports a B&I platform intake change on 20 November 2026.

    Hiring a USDA meat processing feasibility study consultant in Washington

    A newly formed processor borrowing above $1,000,000 under B&I must deliver an independent study with an Agency-defined scope; for smaller or expansion loans, the Agency or lender may still require it, and with so few Washington comparables they usually will. Commission a USDA feasibility study consultant that has no financial tie to the plant, its equipment suppliers, the producers or the lender.

    On the site's cost page, an engagement includes the five Part 5001 components, a five to ten year projection with sensitivity analysis, market and supply analysis, comparable operator benchmarks, a management review, the report in PDF and Word with an Excel model, kickoff and midpoint calls, a revision round and a written acceptance guarantee. It does not include engineering, environmental assessments, appraisals, legal work or lender packaging. A single-site plant with a loan of $1 million to $10 million fits the standard B&I band ($6,900 to $12,500, six to seven weeks); a plant without local comparables, a multi-species or phased build, or a loan over $10 million fits the complex band ($10,500 to $14,500, seven to nine weeks). A three-to-four-week rush, when analysts are available, adds 20% to 35%.

    Bring producer commitments, customer letters, the site and utility information, equipment quotes and layout, the inspection plan, owner résumés and the lender's term sheet. The national USDA meat processing feasibility guide covers the method in detail. To scope a Washington plant, submit the project on the contact page; a senior analyst responds within one business day.

    National program example (outside Washington)

    The inputs name no USDA-financed meat plant in Washington. This site's national meat processing page cites public examples elsewhere, reported as program evidence rather than the firm's work: Better For Butchery in Caldwell County, Kentucky ($2.5 million Rural Development loan) and Cedar County Meat Market in Missouri (two B&I guarantees). The Missouri meat processing case study is an out-of-state analysis of a B&I capacity expansion.

    Last updated 2026-11-08

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    Does a new Washington meat plant need a feasibility study for a USDA loan?

    Almost always. If the borrower is a new business and the B&I loan is above $1,000,000, 7 CFR 5001.306(a)(3)(i) requires an independent study scoped by USDA, and most new plants cost more than that. For smaller loans the Agency may still ask, and with only ten Washington meat processing 7(a) loans since FY2010 and no plant placed in a non-metro county, lenders have little local experience to rely on and usually do.

    What does a meat processing feasibility study consultant charge?

    The site's cost page puts a standard single-site B&I study at $6,900 to $12,500 and a complex one at $10,500 to $14,500, with the fee fixed before signing. A Washington plant often lands in the complex band, because local comparables are scarce and the study must interview producers and buyers and adapt data from neighbouring states. Engineering, environmental and appraisal work are separate purchases.

    How long does a meat processing study take?

    Six to seven weeks on the standard schedule and seven to nine for complex projects, per the site's cost page, with a three to four week rush available at a 20% to 35% premium. Producer and buyer interviews take the longest; having signed letters of intent at kickoff shortens the work. Equipment lead times and inspection approvals run on their own clocks and should be planned in parallel.

    Who can prepare the study for a B&I meat processing loan?

    A consultant USDA accepts as qualified and independent, with no ownership in the plant, no commission from equipment or construction, and no stake in the loan. Producer groups, equipment vendors and engineers supply evidence the consultant tests. The preparer must turn livestock supply, throughput, yields and Washington labour costs into a projection with stress cases that a credit officer and USDA reviewer can check.

    How long is a meat processing feasibility study valid?

    Part 5001 sets no expiry, but the evidence has to be current. Reviewers look for market evidence dated within roughly a year and a half, per the site's cost page, and 5001.203 rejects any appraisal older than twelve months. In meat processing, livestock prices, a lost producer or a change in equipment cost can date a study quickly, so update supply and capital figures if the application is delayed.

    Can one study serve both SBA and USDA lenders for a meat plant?

    Yes, if it is written to the USDA standard with all five components and stressed projections; SBA may also require a feasibility study under 13 CFR 120.160(b), and a USDA-grade report covers it. Washington has very little SBA meat processing history, so a lender comparing structures will lean on the study's own evidence more than on program track record.

    Does Washington have enough meat processing capacity for a new rural plant?

    The data suggest rural capacity is thin. Washington has 0.7 plants per 100,000 residents against 1.1 nationally, lost 8.1% of its plants since 2019, and the plants Census places by county are all in metropolitan counties. Montana, by contrast, has 5.8 per 100,000, mostly small plants. A study must still prove demand at the subject site with producer commitments and buyer letters; statewide scarcity alone does not.

    Is SPUR an option for a Washington meat plant?

    Only the Washington hub vouches for SPUR's terms in this project's inputs: a 90% guarantee on meat, poultry and seafood plant loans up to $175 million, anywhere in the state. Those terms are not among the program facts verified for this page, so confirm the program's status, guarantee, fees and application window with the lender before relying on it. A study prepared to the B&I standard would serve either route.

    Which parts of Washington are eligible for a B&I meat plant?

    Eligibility is decided parcel by parcel under 7 CFR 5001.3, which excludes cities above 50,000 at the 2020 Census and their contiguous urbanized areas. The hub screens Moses Lake, Quincy, Ellensburg, Walla Walla, Wenatchee, Mount Vernon and the lower Yakima Valley towns as eligible, and places cattle and dairy demand in the Columbia Basin. Zoning under the Growth Management Act can still limit where a plant may be built.

    Sources

    1. U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files: https://www2.census.gov/programs-surveys/cbp/datasets/
    2. U.S. Census Bureau, Vintage 2025 population estimates: https://www2.census.gov/programs-surveys/popest/datasets/2020-2025/
    3. Office of Management and Budget, metropolitan and micropolitan delineation, July 2023: https://www2.census.gov/programs-surveys/metro-micro/geographies/reference-files/2023/delineation-files/list1_2023.xlsx
    4. U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: https://data.sba.gov/dataset/7-a-504-foia
    5. 7 CFR Part 5001, CFR 2026 edition (govinfo): https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml
    6. 90 FR 57351, OneRD guaranteed loan technical amendments (11 Dec 2025): https://www.govinfo.gov/content/pkg/FR-2025-12-11/html/2025-22567.htm
    7. 91 FR 11272, OneRD FY2026 guarantee fee, retention fee and guarantee percentage notice: https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm
    8. 13 CFR Part 120, SBA business loan programs (CFR 2026 edition): https://www.ecfr.gov/current/title-13/chapter-I/part-120
    9. USDA RBCS, REAP final rule with comment period, 91 FR 62600 (1 Oct 2026): https://www.govinfo.gov/content/pkg/FR-2026-10-01/html/2026-20178.htm
    10. Oregon, Idaho and Montana meat processing packs (Census CBP and SBA FOIA), used for regional comparison.
    11. USDA Feasibility Study Consultants, Washington state page (Columbia Basin demand, SPUR statement, eligibility screens, program timing): https://usda-feasibility-study.com/washington
    12. USDA Feasibility Study Consultants, national meat processing page (Kentucky and Missouri examples as reported there), engagements index, cost page and contact page: https://usda-feasibility-study.com/meat-processing-feasibility-study-usda ; https://usda-feasibility-study.com/engagements ; https://usda-feasibility-study.com/usda-feasibility-study-cost ; https://usda-feasibility-study.com/contact

    Data current as of November 2026.

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours