USDA Feasibility Study for Sawmills and Wood Products in Wyoming

    NAICS 321

    Wyoming has 32 wood product manufacturers, from sawmills to truss and millwork shops, and in 17 fiscal years its lenders have made exactly one SBA 7(a) loan to the sector, $826,000 in FY2010 to FY2016. Nothing has followed. For a sponsor planning a sawmill, a post-and-pole plant or a timber-frame shop in Wyoming, that empty record is the first fact a lender will notice, and the feasibility study has to replace it with evidence: a timber supply the mill can count on for the life of the loan, buyers for its lumber and residuals, and a cost per thousand board feet that competes with larger mills in neighbouring states.

    Sawmills and wood products in Wyoming: market evidence

    Wyoming: wood product manufacturing, supply and rural footprint

    MeasureWyomingUnited States
    Establishments, 2019 → 202333 → 32 (-3.0%)14,223 → 13,899
    Per 100,000 residents (2023)5.54.1
    Average employees per establishment16.531.1
    Average annual pay per employee$55,676$57,420
    Share of establishments in non-metro counties82.4% (14 in 3 counties)
    Share of state population in non-metro counties (2025)68.8%

    Non-metro counties with the most wood product manufacturing (2023): Uinta County (6); Park County (5); Albany County (3).

    Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.

    Reading a small sector. Wyoming's wood products count has been stable, 33 plants in 2019 and 32 in 2023, a 3.0 percent dip close to the national 2.3 percent. Density is a third above the national rate, 5.5 against 4.1 per 100,000. Plants are half the national size, 16.5 employees against 31.1, with payroll of $918,656 per plant against $1,785,760. The size-class file shows a split industry: 13 of 32 plants have fewer than five employees, while nine have 20 or more, three of them 50 to 99. Pay of $55,676 is only 3.0 percent below the national figure, so labour is not cheap here; mill work competes with energy and mining wages. A reviewer will want to know whether a project is one of the small specialty shops, whose risk is sales, or a commodity sawmill, whose risk is log supply and lumber prices.

    The county file places 17 of the 32: Uinta County has 6 (2.89 per 10,000 residents), Park County 5, Albany County 3 and Laramie County 3. Fifteen plants are in counties with one or two, so the industry is spread thinly across the state. Fourteen of the 17 placed plants (82.4 percent) are in non-metro counties.

    Regional comparison

    Montana and Idaho, labelled as such, show what a larger wood economy looks like. Montana's pack has 149 plants (13.2 per 100,000), up 9.6 percent since 2019, with 19.8 employees each and pay of $56,480; its lenders made four 7(a) loans in FY2020 to FY2026 averaging $631,250. Idaho has 211 plants (10.7 per 100,000) averaging 35.4 employees and $55,729, with eight 7(a) loans averaging $862,500. Pay is almost identical across the three states, which means a Wyoming mill will not win on labour cost. It must win on log cost, freight to local buyers, or a niche product, and the study should show which.

    Demand, revenue and costs

    Wood product demand comes from builders, lumber yards, ranches (posts, poles, corrals), log and timber-frame home buyers, pallet users and, for residuals, buyers of chips, sawdust, bark and firewood. Revenue is output in thousand board feet (MBF) or units by product and grade times delivered price, plus residual sales. Costs are logs (usually the largest line), labour, energy, saw maintenance, trucking, drying, insurance and depreciation. Capital items are the mill building, headrig and resaw lines, edgers and trimmers, kilns, planers, log yard equipment, loaders and trucks.

    Rural footprint and B&I eligibility in Wyoming

    Almost all Wyoming wood plants are in small towns. Of all Wyoming's towns, the 7 CFR 5001.3 definition shuts out just two cities over 50,000, Cheyenne (66,507) and Casper (58,771), and the urbanized land next to them; Evanston (11,705), Cody (10,377), Laramie (32,284) and every mill town in the timbered counties pass on population. The three plants placed in Laramie County need a parcel check against Cheyenne's urbanized area. Urbanized-area questions are covered in the Wyoming state guide.

    Program fit

    B&I is the natural USDA program for a private mill: it finances real estate, machinery and working capital up to $25 million, and 5001.402 lets each asset class amortize over its useful life. Log and lumber supply agreements matter twice: they support the projection and, under 5001.105(d)(2), sales contracts adequate to cover debt service for the loan term reduce a new mill's equity requirement to 10 percent. REAP can fund biomass boilers or kiln energy systems at an operating mill with a year of energy records, though the rule effective 16 October 2026 limits grant shares and excludes some system types. SBA 7(a) and 504 are alternatives; 504 asks a new or special-purpose plant for 15 percent and one that is both for 20 percent (13 CFR 120.910). Every owner above 20 percent is checked under 5001.127(a) for federal judgments, tax or debt delinquency and debarment. Where 50 or more new jobs and a loan above $1,000,000 coincide, 5001.306(a)(1) adds Department of Labor concurrence.

    Financing benchmarks: USDA B&I next to SBA

    Wyoming: SBA lending to wood product manufacturing

    Period7(a) loans7(a) dollars504 loans504 dollars
    FY2010 to FY20161$826,0000$0
    FY2017 to FY20190$00$0
    FY2020 to FY20230$00$0
    FY2024 to FY20260$00$0
    Wyoming had fewer than 30 seasoned 7(a) loans for wood product manufacturing; nationally, 7.1% of 1,015 FY2010 to FY2016 loans were charged off, on average 65 months after approval.

    Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).

    TermB&I rule, fiscal 2026For a Wyoming mill
    Guarantee85% below $5 million; 80% from $5 million to $25 million (91 FR 11272)Both example loans at 85%
    Upfront fee3.0% of the guaranteed amount; +0.50% before construction completion$76,500.00 on Loan B
    Retention0.55% yearly of the guaranteed share outstanding$13,710.39 in year one on Loan B
    TermUseful life, 40 years maximum, no balloon (5001.402)Saw lines 10 years; building 20 years or more
    Equity, new mill with sales contracts10% (5001.105(d)(2))$333,333.33 on Loan B
    Equity, new mill without20% balance sheet or 25% of cost (5001.105(d)(4))$1,000,000.00 on Loan B
    Large hiringDepartment of Labor concurrence above $1,000,000 and 50 jobs (5001.306(a)(1))Larger mills
    StudyNew business over $1,000,000 (5001.306(a)(3)(i))Loan B

    Reading the financing record. One loan in 17 years is not a track record. The national benchmark is unfavourable: of 1,015 wood products 7(a) loans approved in FY2010 to FY2016, 7.1 percent ended in charge-off, generally five or six years in, among the higher rates for manufacturing. Across the country, FY2020 to FY2026 sector loans averaged $766,800 under 7(a) and $1,263,938 under 504. A Wyoming lender will therefore treat a mill as a first-of-its-kind credit, lean heavily on collateral and guarantees, and expect the study to prove log supply in writing. B&I's guarantee helps precisely because there is no local precedent.

    Worked example (illustrative)

    Wyoming has no recent wood products loans, so Loan A takes the national FY2020 to FY2026 average of $766,800, rounded to $765,000, as a saw-line loan repaid over a decade at 7.75 percent. Loan B, a $3,000,000 mill upgrade, runs 20 years at 7.50 percent. Rates and outputs are illustrative.

    Input or resultLoan A: national averageLoan B: mill upgrade (illustrative)
    Loan amount$765,000.00$3,000,000.00
    Guarantee percentage (fiscal 2026 tier)85%85%
    Guaranteed amount$650,250.00$2,550,000.00
    Upfront guarantee fee (3.0% of the guaranteed amount)$19,507.50$76,500.00
    Upfront fee with the guarantee issued before construction is complete (3.5%)$22,758.75$89,250.00
    Balance after 12 monthly payments$712,270.88$2,932,704.39
    First annual retention fee (0.55% of the guaranteed share of that balance)$3,329.87$13,710.39
    Interest rate (illustrative, fixed)7.75%7.50%
    Amortization, years (no balloon)1020
    Monthly payment$9,180.81$24,167.80
    Annual debt service (NOI for 1.00x)$110,169.76$290,013.55
    NOI for 1.25x coverage$137,712.20$362,516.94
    Coverage at that NOI if the rate is 2 points higher1.15x1.08x
    Coverage at that NOI if the term is 5 years shorter0.74x1.09x
    Coverage if NOI comes in 10% below plan1.125x1.125x
    Equity, new business, 25% of project cost (5001.105(d)(4))$255,000.00$1,000,000.00
    Total project cost on that basis$1,020,000.00$4,000,000.00
    Equity, new business, 20% balance sheet route if this loan is the only debt$191,250.00$750,000.00
    Equity, existing business, 10% of project cost (5001.105(d)(1))$85,000.00$333,333.33
    Independent feasibility study, new business (5001.306(a)(3))Agency discretionrequired
    Annual output (illustrative)4,000 MBF12,000 MBF
    Debt service per MBF$27.54$24.17
    NOI per MBF for 1.25x$34.43$30.21

    Per-MBF test. A small mill producing 4,000 MBF a year on Loan A carries $27.54 of debt service per MBF and needs $34.43 of net operating income per MBF for 1.25x coverage; a larger mill producing 12,000 MBF on Loan B carries $24.17 and needs $30.21. Those margins come after log cost, which is why the study must show delivered log prices under contract. The short-term line is the warning: if the saw line in Loan A were financed over 5 years, the same income would cover only 0.74x. Lumber prices are cyclical, so the study should also run coverage at a low-price year, not only the average.

    Evidence a Wyoming wood products study must build

    With one historical loan and few comparable mills, the study needs:

    1. Log supply: volumes, species, haul distances and prices from federal, state or private timber, with contracts or sale records covering the loan term.
    2. A sawmill or plant recovery rate (lumber out per log in) from equipment specifications.
    3. Buyers by product: lumber yards, builders, ranch supply, home builders, pallet users, with letters or contracts.
    4. Residual markets for chips, sawdust, bark and firewood, and their haul distances.
    5. Competing mills within log and lumber haul distance, including Montana, Idaho, Colorado and South Dakota mills.
    6. Price history and a low-price scenario.
    7. Labour availability at about $55,676 per employee, with skilled sawyers and filers named or recruited.
    8. Fire risk, insurance cost and log-yard safety.

    Risks and mitigants in Wyoming

    Log supply is the risk that sinks mills: a mill without secured timber for the loan term is betting on future sales it does not control. Lumber price cycles can erase margins for a year or two. Fire, both in the forest and in the mill, threatens supply and plant. Freight to distant buyers is costly from most Wyoming locations. Skilled labour is scarce. Mitigants include long-term supply agreements, a product mix weighted to niche or local products, residual sales to steady cash flow, fire protection and insurance, and equipment terms that match useful life. Sawmill equipment has a thin resale market, which the 5001.203 appraisal reflects.

    Steps and sponsor materials

    After confirming eligibility, the lender commissions the study and an equipment and real estate appraisal, then sends the B&I file to the USDA Rural Development state office serving Wyoming. Mill sponsors provide timber supply documents, buyer letters, equipment quotes and layouts, site plans and permits, the staffing plan, operating statements for an existing plant, personal financial statements and guarantees from each holder of 20 percent or more. Sawmill studies come back when log supply is assumed, recovery rates are optimistic, or prices are taken from a peak year.

    Program example

    The inputs record no USDA-financed sawmill or wood products plant in Wyoming. SBA's single $826,000 7(a) loan in FY2010 to FY2016 is the only lending record in the files.

    Hiring a USDA sawmill feasibility study consultant in Wyoming

    A start-up wood products company whose guaranteed loan tops $1,000,000 cannot proceed without an independent study, under 5001.306(a)(3)(i), written by a preparer USDA regards as qualified. Expansions and smaller equipment loans are left to USDA's discretion, though with no local precedent a lender is likely to ask. A sawmill feasibility study consultant cannot be tied to the timber seller, the equipment dealer and the buyers. The national industrial page, which covers wood manufacturing, lists industrial studies at $12,500 to $18,500 or more over 7 to 9 weeks. Per the cost page, the engagement is quoted as a fixed fee, starts with a data request in the first 48 hours, and ends with a PDF and Word report and Excel model, revised without further charge until USDA or the lender accepts it; engineering and environmental studies are separate.

    Before engaging a USDA feasibility study consultant, ask how log supply will be documented for the full loan term, since that one section decides most mill credits.

    Use the contact page to share the site, products, log sources and loan size. The page lists a one-business-day reply from a senior analyst.

    Last updated 2026-11-08

    David Miller, CPA

    USDA Feasibility, Inc.

    Frequently Asked Questions

    Does a Wyoming sawmill loan require a feasibility study?

    The binding case in 7 CFR 5001.306(a)(3)(i) is a newly formed company with a B&I loan over $1,000,000. Nationally the average wood products 7(a) loan is $766,800, so smaller equipment loans may fall below the line, where USDA decides. With only one Wyoming SBA loan to the sector since FY2010, lenders will probably want one anyway.

    What does a sawmill feasibility study consultant charge?

    Industrial studies, including wood products, are listed at $12,500 to $18,500 or more on the national industrial page. Price depends on mill size, product range and timber supply complexity, and is fixed before work begins. Loan B's upfront B&I fee is $76,500.00, for comparison.

    How long does a mill study take?

    Plan for seven to nine weeks, the national industrial page's schedule. Timber supply documentation and buyer letters are usually the slowest pieces.

    Who can prepare it?

    A qualified outsider USDA will accept, holding no interest in the timber, the equipment, the buyers or the loan. An equipment dealer's production estimate is input, not a study.

    For how long is a sawmill study valid?

    The regulation is silent on shelf life. In a cyclical lumber market, though, prices go stale fast: refresh the price section if more than about 18 months pass (the cost page's description of USDA practice), and remember the appraisal lapses after a year.

    Can one study serve SBA and USDA lenders?

    It can, with both lenders named and both structures modelled; 13 CFR 120.160(b) means SBA could insist on its own study in any case. Given Wyoming's lack of SBA wood products lending, B&I is likely to be the main option for a mill of any size.

    Where does timber for a Wyoming mill come from?

    The inputs do not include timber data. A study must document the source, whether federal, state or private, with volumes, species, haul distances and contract terms covering the loan. A mill without secured supply for the loan term is the most common reason lenders decline.

    Does a log home or timber-frame shop count as wood products?

    Yes, the Census code used here covers wood product manufacturing broadly, including sawmills, millwork, trusses and prefabricated wood buildings. Those specialty shops have different risks from a commodity mill: sales and backlog rather than log supply.

    Why is the Wyoming loss benchmark so high?

    It is national, not Wyoming's: 7.1 percent of 1,015 wood products 7(a) loans from FY2010 to FY2016 were charged off, reflecting lumber cycles and commodity margins. Wyoming's single loan cannot produce a rate. A study should show coverage in a low-price year.

    Sources

    1. U.S. Census Bureau, County Business Patterns 2019 and 2023, state and county files (including employment-size classes): https://www2.census.gov/programs-surveys/cbp/datasets/
    2. U.S. Census Bureau, Vintage 2025 population estimates (state, county and incorporated places): https://www2.census.gov/programs-surveys/popest/datasets/2020-2025/
    3. Office of Management and Budget, metropolitan and micropolitan delineation, July 2023: https://www2.census.gov/programs-surveys/metro-micro/geographies/reference-files/2023/delineation-files/list1_2023.xlsx
    4. U.S. Small Business Administration, 7(a) and 504 FOIA loan data, as of 30 Sep 2026: https://data.sba.gov/dataset/7-a-504-foia
    5. 7 CFR Part 5001, OneRD Guaranteed Loanmaking and Servicing, CFR 2026 edition (govinfo): https://www.govinfo.gov/content/pkg/CFR-2026-title7-vol15/xml/CFR-2026-title7-vol15-part5001.xml
    6. 91 FR 11272, OneRD annual notice of guarantee fee rates, retention fee rates and guarantee percentages for fiscal 2026 (govinfo): https://www.govinfo.gov/content/pkg/FR-2026-03-09/html/2026-04581.htm
    7. 90 FR 57351, OneRD guaranteed loan regulation technical amendments, December 11, 2025 (govinfo): https://www.govinfo.gov/content/pkg/FR-2025-12-11/html/2025-22567.htm
    8. 91 FR 62600, REAP final rule with comment period, effective 16 October 2026 (govinfo): https://www.govinfo.gov/content/pkg/FR-2026-10-01/html/2026-20178.htm
    9. 13 CFR Part 120, SBA business loan programs (CFR 2026 edition on govinfo)
    10. Site pages: /industrial-feasibility-study-usda, /usda-feasibility-study-cost, /contact

    Data current as of November 2026.

    Ready to Start Your USDA Project?

    Get your free consultation today and take the first step toward securing USDA funding for your rural development project.

    Our USDA feasibility study consultants scope every engagement against the five Part 5001 components in a free consultation.

    Get Your Free Consultation

    Fill out the form below and we'll contact you within 24 hours to discuss your project.

    We'll respond within 24 hours