Three in four Mississippi wood products plants that Census places by county, 129 of them, operate outside metro areas, and their workers earn $57,848 a year on average, slightly above the national figure; of the 18 project types on this site's Mississippi pages, only wood products and the eight utility-scale solar generators pay at or above the U.S. level. Behind them stand 19.2 million acres of forestland and, on the hub's figures, a $15.44 billion forestry economy. The job of a USDA sawmill feasibility study in Mississippi is to show that a particular mill can buy logs, sell lumber or other products through the cycle and service a Business and Industry (B&I) loan, in a sector where the plant count fell 10.6 percent in four years even as large new mills opened.
Sawmills and wood products in Mississippi: market evidence
Mississippi: wood product manufacturing, supply and rural footprint
| Measure | Mississippi | United States |
|---|---|---|
| Establishments, 2019 → 2023 | 235 → 210 (-10.6%) | 14,223 → 13,899 |
| Per 100,000 residents (2023) | 7.1 | 4.1 |
| Average employees per establishment | 41.4 | 31.1 |
| Average annual pay per employee | $57,848 | $57,420 |
| Share of establishments in non-metro counties | 75.0% (129 in 28 counties) | |
| Share of state population in non-metro counties (2025) | 50.0% |
Non-metro counties with the most wood product manufacturing (2023): Chickasaw County (9); Jones County (8); Pontotoc County (8); Noxubee County (7); Amite County (6); Lee County (6).
Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.
Consolidation in a timber state. Mississippi has 73 percent more wood products plants per resident than the nation, and they are a third larger (41.4 employees against 31.1). Yet 25 plants disappeared between 2019 and 2023, a 10.6 percent fall against 2.3 percent nationally. The hub's account of a nearly $200 million sawmill at Gloster with 131 direct jobs points to the pattern: fewer, bigger, more automated mills replacing small ones. That matters for a feasibility study in two ways. A new or expanding mill competes for logs with large, efficient buyers, so the study must show a timber supply and delivered log cost that leave margin; and the labour market is tight, with average payroll per plant of about $2.40 million (computed) and pay at the national level, so a pro forma cannot assume cheap rural labour. A reviewer will also test product price assumptions across the lumber cycle, not at a single year's price.
Rural footprint and B&I eligibility in Mississippi
At 75.0 percent, wood products has the highest non-metro share of any industry on the Mississippi pack list, against 50.0 percent of residents. The top non-metro counties are Chickasaw (9), Jones and Pontotoc (8 each), Noxubee (7), and Amite and Lee (6 each). Amite County is where the hub places the Gloster mill. Neighbouring states' packs, read as theirs, show the same concentration: Arkansas has 8.9 plants per 100,000, Alabama 6.8, Tennessee 6.1 and Louisiana 3.5.
Most mill sites will pass 7 CFR 5001.3 easily, because the test excludes only cities and towns above 50,000 at the latest decennial census and the urbanized areas contiguous to them; on the hub's 2020 Census table those are Jackson, Gulfport and Southaven, plus their suburbs. A mill or pellet plant near the Jackson or Gulfport urbanized fringe still needs the map check, as does any industrial park site near Biloxi.
The borrower and its significant owners must pass 5001.127: a federal court judgment left unpaid, federal tax or other federal debt in delinquency, or a suspension or debarment, whether it attaches to the company itself, to whoever controls it or to a holder of more than a fifth of it, makes the mill ineligible. Personal guarantees from owners of 20 percent or more follow 5001.204.
Program fit for a Mississippi mill
- B&I finances sawmills and wood products plants: buildings, saw lines, kilns, planers, log yards, rolling stock and working capital, with a ceiling of $25 million for any one borrower. The hub names B&I as the program that finances mills.
- REAP, which the hub says funds kilns and mill energy systems, operates under the rule effective 16 October 2026: a renewable system such as a biomass-fired boiler can receive a grant covering no more than one quarter of its cost, with $500,000 the ceiling, and only after it has run for 12 months; grant plus REAP guaranteed loan cannot exceed 75 percent of cost. The REAP guaranteed loan can fund construction.
- SBA 7(a) has made 21 Mississippi wood products loans since FY2010, and SBA 504 one, for $2.4 million, in FY2024 to FY2026.
- Community Facilities does not fund private mills; the hub notes DRA co-funding in the Delta and ARC and Southeast Crescent coverage in parts of the state.
Financing benchmarks: USDA B&I next to SBA
Mississippi: SBA lending to wood product manufacturing
| Period | 7(a) loans | 7(a) dollars | 504 loans | 504 dollars |
|---|---|---|---|---|
| FY2010 to FY2016 | 10 | $2.4 million | 0 | $0 |
| FY2017 to FY2019 | 5 | $6.2 million | 0 | $0 |
| FY2020 to FY2023 | 4 | $3.6 million | 0 | $0 |
| FY2024 to FY2026 | 2 | $1.7 million | 1 | $2.4 million |
Average 7(a) loan, FY2020 to FY2026: $886,467. Average 504 loan: $2.4 million. Mississippi had fewer than 30 seasoned 7(a) loans for wood product manufacturing; nationally, 7.1% of 1,015 FY2010 to FY2016 loans were charged off, on average 65 months after approval.
Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).
| B&I term | Fiscal 2026 rule | Source |
|---|---|---|
| Guarantee | 85% if the loan is less than $5 million; 80% between $5 million and $25 million | 91 FR 11272 |
| Upfront fee | 3.0% of the guaranteed amount; reduced-fee loans 1.0% | 91 FR 11272 |
| Retention fee | 0.55% annually of the guaranteed outstanding balance | 91 FR 11272 |
| Term | each asset's useful life, up to 40 years; saw lines and rolling stock shorter than buildings | 7 CFR 5001.402 |
| Equity | 10% existing mill; 10% new mill with qualifying offtake contracts; otherwise 20% or 25% | 7 CFR 5001.105(d) |
| Collateral | appraisal; going-concern value deducted before discounts | 7 CFR 5001.203 |
| Study | required for a new business above $1 million | 7 CFR 5001.306(a)(3)(i) |
B&I terms summarised from the FY2026 notice and 7 CFR Part 5001.
What the lending record implies. SBA's role in Mississippi wood products has been modest, 21 loans in 17 years, and recent loans averaged $886,467, equipment-scale money. Mill construction and modernisation run to millions and sit naturally in B&I. With too few seasoned state loans to report, the national benchmark applies: 7.1 percent of 1,015 wood products loans charged off, on average 65 months after approval, one of the higher industrial loss rates, which reflects the lumber price cycle. A lender will want the study to show coverage through a price trough, not at the top of the cycle.
Worked example (illustrative)
Loan A is $770,000, the national FY2020 to FY2026 average wood products 7(a) loan ($766,800) rounded, because Mississippi had only six such loans; it finances equipment over 12 years at an illustrative 7.50 percent. Loan B is an illustrative $4,500,000 modernisation of an existing mill, kept below the $5 million tier line, at 7.25 percent over 20 years.
| Input or result | Loan A: equipment, national average | Loan B: mill modernisation |
|---|---|---|
| Loan amount | $770,000.00 | $4,500,000.00 |
| Program and fee schedule | B&I, fiscal 2026 notice | B&I, fiscal 2026 notice |
| Guarantee percentage | 85% | 85% |
| Guaranteed amount | $654,500.00 | $3,825,000.00 |
| Upfront guarantee fee | $19,635.00 | $114,750.00 |
| Upfront fee if the guarantee is issued before construction is complete (+0.50%) | $22,907.50 | $133,875.00 |
| First annual retention fee (guaranteed share of the balance after 12 payments) | $3,407.38 | $20,551.48 |
| Interest rate (illustrative, fixed) | 7.50% | 7.25% |
| Amortization, years (no balloon) | 12 | 20 |
| Monthly payment | $8,125.24 | $35,566.92 |
| Annual debt service | $97,502.91 | $426,803.03 |
| Quarterly debt service | $24,375.73 | $106,700.76 |
| NOI needed for 1.25x coverage | $121,878.64 | $533,503.79 |
| Coverage on that 1.25x NOI if the rate were 2 points higher | 1.13x | 1.08x |
| Equity, existing business, 10% of project cost (5001.105(d)(1)) | $85,555.56 | $500,000.00 |
| Equity, new business with qualifying sales contracts, 10% of project cost (5001.105(d)(2)) | $85,555.56 | $500,000.00 |
| Equity, new business, 25% of project cost (5001.105(d)(4)) | $256,666.67 | $1,500,000.00 |
| Total project cost on that basis | $1,026,666.67 | $6,000,000.00 |
Computed in Python from the inputs shown; guarantee and fee rates from 91 FR 11272; equity routes from 7 CFR 5001.105(d), assuming the guaranteed loan is the only debt.
Per-MBF and per-job tests. At an illustrative output of 30 million board feet a year, Loan B's 1.25x NOI of $533,503.79 equals $17.78 per thousand board feet (MBF) after log costs, labour, energy and maintenance; at 15 million board feet it doubles to $35.57. Loan A needs $4.06 per MBF at 30 million board feet. Spread across a plant of the state's average size, 41.4 employees, Loan B's target equals about $12,887 per job. The study must show the delivered log cost and product price spread that produce those margins in a weak year.
Cycle test. If lumber prices fall far enough to cut NOI by 20 percent, coverage drops to 1.00x; a two-point rate rise alone cuts it to 1.08x. Quarterly debt service of $106,700.76 on Loan B means a mill needs working capital to carry log inventory through wet-weather months when logging slows.
What a lender-grade sawmill feasibility study in Mississippi must prove
- Timber supply: volume of available sawtimber within haul distance, ownership, competing mills' demand and delivered log price trends.
- Products and markets: product mix, buyers, distribution and price history across at least one full cycle.
- Technology and recovery: saw line design, recovery rates, kiln and planer capacity, confirmed by equipment suppliers or engineers.
- Residuals: sales of chips, sawdust and bark to pulp, pellet or energy buyers, with contracts where possible.
- Labour: staffing, wages against the $57,848 state average and training; the study shows recruitment in counties where other mills compete.
- Energy: kiln fuel and power costs, and any REAP-eligible system, sized to the rule's commensurate-use test.
- Capital costs and schedule with vendor quotes, construction contract and contingency; a construction-period guarantee adds the 5001.205(e)(2) requirements.
- Air, water and stormwater permits obtained by the sponsor's environmental advisers, with their conditions carried into the cost and schedule.
- Rural-area status of the parcel under 5001.3.
Risks and mitigants in Mississippi
Price cycles are the defining risk; mitigants are conservative price decks, residual income and a debt structure that survives a trough. Log supply competition from large new mills is addressed with supply agreements and a wood-basket analysis. Weather affects logging and log inventory; the study models wet seasons. Fire and equipment breakdown risk call for insurance and spare-parts budgets.
Lender file, sponsor inputs and frequent review comments
Applications reach Rural Development in Jackson, the state office listed on the hub, through the lender. The sponsor provides timber supply studies or procurement plans, offtake and residual agreements, equipment quotes and layouts, permits, historical financials for an existing mill and owners' statements. Studies return with comments when prices come from a single strong year, log supply ignores competing mills, or residual income is assumed without buyers.
Program example
The hub's precedent file lists no sawmill financed by USDA in Mississippi. It does describe the nearly $200 million CLAW Forestry sawmill at Gloster in Amite County, with 131 direct jobs, now operating as Gloster Forest Products, as an example of recent private investment; the inputs do not say USDA financed it, and this page does not present it as a program example.
Hiring a USDA sawmill feasibility study consultant in Mississippi
The rule is clear for start-ups: a new business seeking a B&I guarantee above $1,000,000 must provide a feasibility study by an independent consultant whom the Agency accepts, with scope the Agency sets (7 CFR 5001.306(a)(3)(i)). A new mill company borrowing at Loan B's scale would be covered; an existing mill modernising, as in the example, is at the Agency's discretion, and lenders typically still ask given the lumber cycle.
Mill studies with timber supply analysis and construction usually land in the higher, complex tier on the cost page (up to $14,500, seven to nine weeks), while an equipment expansion for an established mill can fit the standard band starting at $6,900. The deliverable covers supply and market analysis, technical and management review, cycle-tested projections, the Excel model and the acceptance guarantee; forestry inventory, engineering and environmental permitting are separate professional work.
A sawmill feasibility study consultant should begin with your wood basket and your buyers. The homepage outlines what to ask a USDA feasibility study consultant before signing. Through the contact page, send the mill location, products, capacity, budget and lender; the reply is a written scope with a fixed fee.
Last updated 2026-11-08
USDA Feasibility, Inc.