Wood products are Montana's most rural manufacturing sector: 60.6 percent of the state's county-placed wood product plants are in non-metro counties, against 44.7 percent of its people, and the state supports 13.2 plants per 100,000 residents, 3.2 times the national 4.1. The count grew from 136 to 149 between 2019 and 2023 while the national count fell. A USDA sawmill and wood products feasibility study in Montana starts from that base and asks the questions a B&I reviewer will: where the logs come from and on what terms, what the mill sells and where, how residuals are priced, and whether the plant can carry debt through a lumber price cycle.
Wood products in Montana: market evidence
Montana: wood product manufacturing, supply and rural footprint
| Measure | Montana | United States |
|---|---|---|
| Establishments, 2019 → 2023 | 136 → 149 (+9.6%) | 14,223 → 13,899 |
| Per 100,000 residents (2023) | 13.2 | 4.1 |
| Average employees per establishment | 19.8 | 31.1 |
| Average annual pay per employee | $56,480 | $57,420 |
| Share of establishments in non-metro counties | 60.6% (83 in 9 counties) | |
| Share of state population in non-metro counties (2025) | 44.7% |
Non-metro counties with the most wood product manufacturing (2023): Flathead County (25); Ravalli County (20); Lake County (9); Sanders County (8); Lincoln County (7); Fergus County (5).
Sources: U.S. Census Bureau, County Business Patterns 2019 and 2023 (state and county files; establishments with paid employees; employment and payroll suppressed in some cells); Vintage 2025 county population estimates; OMB metropolitan statistical area delineation, July 2023. Non-metro county is a proxy for USDA rural eligibility, not the eligibility test itself.
Reading the wood products numbers. Montana added 13 plants (+9.6 percent) as the U.S. lost 2.3 percent, which points to small mills, pallet and post-and-pole operations, log home and truss builders entering the market rather than large sawmills opening. Plant size supports that: 19.8 employees on average against 31.1 nationally, and payroll of $1,117,101 per plant against $1,785,760. Pay is almost exactly the national level, $56,480 against $57,420 (1.6 percent lower), unusual for a Montana sector and a sign that mill work competes with other skilled trades for labour. For a pro forma that means no wage advantage: a new mill should budget near-national wages and show it can recruit sawyers, filers and maintenance staff in its county.
Where the plants are
The county file places 137 plants. Flathead County leads with 25 (2.17 per 10,000 residents) and Ravalli has 20 (4.12), followed by metro Missoula (13), Gallatin (12) and Yellowstone (11). The densest non-metro counties are Sanders (8 plants, 5.69 per 10,000), Fergus (5, 4.23), Powell (3, 4.19), Lincoln (7, 3.14) and Lake (9, 2.70), against 1.30 statewide. The six leading non-metro counties hold 74 of the 83 non-metro plants, 89.2 percent, so wood products cluster in the western timber counties, where log supply, trucking and a trained workforce exist.
Demand drivers, revenue and costs
Demand for a mill's output depends on product: dimension lumber follows housing starts and repair spending; timbers, posts and poles follow agricultural and fencing demand; pallets follow regional freight; and residuals (chips, sawdust, bark, shavings) depend on pulp, panel, pellet or biomass buyers within trucking range. Revenue is volume by product times realised price, plus residual sales. Costs are delivered logs (usually the largest line), labour, energy, saw maintenance, trucking, insurance and depreciation. Capital items are the mill building and yard, headrig and resaw, edgers and trimmers, kilns, planer, sorting and stacking, log handling equipment, dust and fire protection, and working capital for log and lumber inventory.
Rural footprint and B&I eligibility in Montana
Of the 137 placed plants, 83 are in nine non-metro counties (60.6 percent): 16.2 plants per 100,000 non-metro residents against 8.5 in the metro counties, the strongest rural lean of any well-reported Montana sector on this site. The 54 metro-county plants are not automatically ineligible. Under 7 CFR 5001.3 only cities and towns above 50,000 and their contiguous urbanized areas are excluded, and in Montana those are Billings, Missoula, Great Falls and Bozeman, with 2025 populations of 121,239, 78,903, 60,208 and 58,814. A mill outside Missoula's urbanized area in metro Missoula County, or in Broadwater or Jefferson counties, can qualify. The Montana state guide has the parcel check.
Regional comparison
Montana's 13.2 plants per 100,000 residents leads its neighbours' packs: Idaho 10.7 (211 plants, 35.4 employees on average), South Dakota 6.2 (57 plants), Wyoming 5.5 (32 plants, 82.4 percent non-metro) and North Dakota 3.4 (27 plants averaging 88.0 employees). Idaho's mills are larger and pay $55,729, close to Montana; a study that borrows Idaho throughput or margins for a Montana mill should adjust for plant scale.
Program fit
USDA's route for a mill is B&I, which can fund construction, modernisation, purchase and working capital in a rural area on terms matched to the life of the saws, kilns and buildings. SBA 7(a) has financed 15 Montana wood products plants since FY2010, mostly small loans, and SBA 504 one. REAP can fund efficiency measures or a renewable system at an operating mill once 12 months of data exist; a biomass boiler or kiln heat project is a case to test with the lender. Mills creating more than 50 jobs on a loan above $1,000,000 also need Department of Labor concurrence under 5001.306(a)(1), so the study states its headcount plainly. Community Facilities does not fund commercial mills.
Financing benchmarks: USDA B&I next to SBA
Montana: SBA lending to wood product manufacturing
| Period | 7(a) loans | 7(a) dollars | 504 loans | 504 dollars |
|---|---|---|---|---|
| FY2010 to FY2016 | 9 | $3.0 million | 1 | $259,000 |
| FY2017 to FY2019 | 2 | $132,500 | 0 | $0 |
| FY2020 to FY2023 | 3 | $1.9 million | 0 | $0 |
| FY2024 to FY2026 | 1 | $675,000 | 0 | $0 |
Average 7(a) loan, FY2020 to FY2026: $631,250. Montana had fewer than 30 seasoned 7(a) loans for wood product manufacturing; nationally, 7.1% of 1,015 FY2010 to FY2016 loans were charged off, on average 65 months after approval.
Source: SBA 7(a) and 504 FOIA loan data, as of 30 Sep 2026 (project state; disbursed loans only; cancelled and undisbursed loans excluded).
| Term | USDA B&I, fiscal 2026 | Source |
|---|---|---|
| Guarantee, loans under $5 million | 85% | 91 FR 11272 |
| Guarantee, $5 million to $25 million | 80% | 91 FR 11272 |
| Upfront guarantee fee | 3.0% of the guaranteed amount | 91 FR 11272; 7 CFR 5001.454 |
| Annual retention fee | 0.55% of the guaranteed share of principal outstanding on December 31 | 91 FR 11272; 7 CFR 5001.455 |
| Reduced-fee loans (criteria in 5001.454) | 1.0% fee, 0.50% retention, 80% guarantee | 91 FR 11272 |
| Guarantee issued before construction is complete | additional 0.50% fee | 91 FR 11272; 7 CFR 5001.454 |
| Maximum loan per borrower | $25 million | 7 CFR 5001.406(c) |
| Term | useful life of the collateral, 40 years at most, no balloon | 7 CFR 5001.402 |
| Interest rate | negotiated, fixed or variable, no higher than the lender's similar non-guaranteed loans | 7 CFR 5001.401 |
| Equity, existing business | 10% balance sheet equity (or debt to equity of 9:1), or 10% of project cost | 7 CFR 5001.105(d)(1) |
| Equity, new business | 20% balance sheet equity (or 4:1), or 25% of project cost; 25% (or 3:1) when the guarantee issues before construction is complete | 7 CFR 5001.105(d)(3), (d)(4) |
| Independent feasibility study | required above $1,000,000 for a new business; at the Agency's discretion otherwise | 7 CFR 5001.306(a)(3) |
| SBA 7(a), for comparison | 85% guarantee up to $150,000, 75% above | 13 CFR 120.210 |
| SBA 504, for comparison | borrower injection 10%; 15% if new or single purpose; 20% if both | 13 CFR 120.910 |
What it means for a Montana mill. SBA's Montana wood products lending is thin: 4 7(a) loans in FY2020 to FY2026 averaging $631,250, 0.50 percent of the U.S. total, and one 504 loan in FY2010 to FY2016. Two of Montana's nine seasoned 7(a) loans were charged off in the FOIA file, too few for a reliable rate; nationally, 7.1 percent of 1,015 FY2010 to FY2016 wood products loans were charged off, on average 65 months after approval, one of the higher industrial loss rates. A modernisation of a working Montana mill will often run to several million dollars, so B&I's 85 percent guarantee under $5 million and terms matched to equipment life are the main attractions; a new business borrowing over $1,000,000 must provide an independent study.
Worked example (illustrative)
Montana has fewer than 10 SBA wood products loans since FY2020, so Loan A uses $775,000, rounding the national FY2020 to FY2026 average 7(a) loan of $766,800. Loan B, $4,000,000, is an illustrative mill modernisation. Both use an illustrative 7.75 percent fixed rate and 15-year amortization, a typical life for mill equipment.
| Input or result | Loan A | Loan B |
|---|---|---|
| Loan amount | $775,000.00 | $4,000,000.00 |
| Guarantee percentage (fiscal 2026 tier) | 85% | 85% |
| Guaranteed amount | $658,750.00 | $3,400,000.00 |
| Upfront guarantee fee (3.0% of the guaranteed amount) | $19,762.50 | $102,000.00 |
| Upfront fee if the guarantee issues before construction is complete (+0.50%) | $23,056.25 | $119,000.00 |
| First annual retention fee (0.55% of the guaranteed share of the balance after 12 payments) | $3,490.01 | $18,012.96 |
| Interest rate (illustrative, fixed) | 7.75% | 7.75% |
| Amortization (years, no balloon) | 15 | 15 |
| Monthly payment | $7,294.89 | $37,651.03 |
| Annual debt service (NOI for 1.00x, break-even on debt) | $87,538.65 | $451,812.36 |
| NOI for 1.25x coverage | $109,423.31 | $564,765.45 |
| Coverage at that NOI if the rate is 2 points higher | 1.11x | 1.11x |
| Coverage at that NOI if the term is 5 years shorter | 0.98x | 0.98x |
| Equity, new business, 25% of total project cost (5001.105(d)(4)) | $258,333.33 | $1,333,333.33 |
| Total project cost on that basis | $1,033,333.33 | $5,333,333.33 |
| Equity, new business, 20% balance sheet route if this loan is the only liability | $193,750.00 | $1,000,000.00 |
| Equity, existing business, 10% of project cost (5001.105(d)(1)) | $86,111.11 | $444,444.44 |
| Independent feasibility study (5001.306(a)(3)) | full application; study at the Agency's discretion (5001.306(a)(3)(ii)) | required for a new business (5001.306(a)(3)(i)) |
Debt-to-payroll and per-MBF tests. Loan B's debt service of $451,812.36 equals 40.45 percent of the average Montana wood products plant's payroll ($1,117,101), so it suits a mill well above the state's average size. An illustrative mill sawing 20 million board feet a year needs $28.24 of net operating income per thousand board feet (MBF) for Loan B at 1.25x; a 5 million board foot mill needs $21.88 per MBF for Loan A. Short equipment terms make these loans sensitive: shortening amortization to 10 years drops coverage to 0.98x at the same income, while a two-point rate increase drops it to 1.11x.
What a lender-grade sawmill feasibility study in Montana must prove
- Log supply for the life of the loan: sources, volumes, species, haul distances and contract terms, with a second source for the largest supplier.
- Delivered log cost and its history, and a projection that survives a period of high log prices.
- Product mix and buyers, with lumber price sensitivity across a full cycle rather than a single year's prices.
- Residual markets for chips, sawdust, bark and shavings within trucking range, and the cost of disposal if they close.
- Recovery and throughput supported by equipment specifications and, for an existing mill, its records.
- Staffing at near-national wages ($56,480 per employee) and a recruitment plan for skilled positions.
- Fire protection, dust control and insurance cost.
- Eligibility of the mill site under 5001.3, plus the headcount USDA needs if Labor concurrence applies.
Risks and mitigants in Montana
Log supply is the risk that decides most mill credits; wildfire seasons, harvest restrictions and competing mills can all reduce it, so the study needs contracts or a documented supply history and a scenario with higher delivered cost. Lumber prices swing widely, so the projection should use multi-year average prices with a low-price stress, not the latest quarter. Residual markets can disappear when a buyer closes, turning revenue into a disposal cost. Mills face fire and dust hazards that drive insurance cost. Used mill equipment appraises well below replacement cost, and 5001.203 deducts going-concern value before discounting collateral, so equity and guarantees carry more of the risk.
Process, documents and what gets a study returned
USDA review happens at the Rural Development state office serving Montana once the lender submits the application and study. A mill sponsor should be ready with log supply contracts or records, product and buyer information, equipment quotes and layouts, the construction or modernisation budget, three years of statements for an existing mill, personal financial statements and owner guarantees (5001.204). Mill studies are returned when they use peak lumber prices, assume log supply without evidence, or ignore residual disposal costs.
Program example
No Montana sawmill or wood products financing is named in the inputs. The site's Pennsylvania hardwood mill modernisation case study is linked below and is outside Montana.
Hiring a USDA sawmill feasibility study consultant in Montana
When a new mill company asks for a B&I guarantee on more than $1,000,000, USDA requires an independent sawmill feasibility study consultant it finds acceptable (5001.306(a)(3)(i)). For an established mill's modernisation or a smaller loan, the Agency decides. The cost page lists what the fee buys: supply and market analysis, technical review, a five to ten year model with price and supply stresses, management and economic sections, report files in PDF and Word, the Excel workbook, and one revision. Engineering, environmental and appraisal work sit outside the scope. The sponsor provides log supply evidence, buyer information, quotes and records. Log supply is where a USDA feasibility study consultant earns its fee on a Montana mill, so ask how supply will be documented before signing.
For a scoped proposal, use the contact page and give the mill's location, program, cost range and lender; a senior analyst answers within one business day, the page promises.
Last updated 2026-11-08
USDA Feasibility, Inc.